lkml.org 
[lkml]   [2013]   [Jan]   [23]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v1 0/6] USB: Add support for multiple PHYs of same type
On Tuesday 22 January 2013 10:32 PM, Koen Kooi wrote:
>
> Op 22 jan. 2013, om 17:16 heeft kishon <kishon@ti.com> het volgende geschreven:
>
>> Hi,
>>
>> On Tuesday 22 January 2013 09:15 PM, kishon wrote:
>>> On Tuesday 22 January 2013 09:11 PM, Koen Kooi wrote:
>>>>
>>>> Op 22 jan. 2013, om 10:58 heeft Kishon Vijay Abraham I <kishon@ti.com>
>>>> het volgende geschreven:
>>>>
>>>>> This patch series adds support for adding multiple PHY's (of same type).
>>>>> The binding information has to be present in the PHY library (otg.c) in
>>>>> order for it to return the appropriate PHY whenever the USB controller
>>>>> request for the PHY. So added a new API usb_bind_phy() to pass the
>>>>> binding
>>>>> information. This API should be called by platform specific
>>>>> initialization
>>>>> code.
>>>>>
>>>>> So the binding should be done something like
>>>>> usb_bind_phy("musb-hdrc.0.auto", 0, "omap-usb2.1.auto"); specifying
>>>>> the USB
>>>>> controller device name, index, and the PHY device name.
>>>>> I have done this binding for OMAP platforms, but it should be done for
>>>>> all the platforms.
>>>>>
>>>>> After this design, the phy can be got by passing the USB controller
>>>>> device
>>>>> pointer and the index.
>>>>>
>>>>> Developed this patch series on
>>>>> git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb.git xceiv
>>>>> after applying "usb: musb: add driver for control module" patch series
>>>>> and "ARM: dts: omap: add dt data for MUSB"
>>>>>
>>>>> Did basic enumeration testing in omap4 panda and omap3 beagle.
>>>>
>>>> With this patchset USB completely breaks on am33xx beaglebone, is that
>>>> intended?
>>> Not really.
>>> Does am33xx makes use of omap2430.c? Which PHY does am33xx uses?
>>
>> I figured out it uses drivers/usb/musb/musb_dsps.c (So it doesn't use omap2430.c). I think it uses TWL4030_USB (TPS659x0) as PHY.
>
> Actually it uses nop-phy as a phy, which is missing from arch/arm/boot/dts/am33xx.dtsi, so mainline is already broken. But adding the nop-phy to the DT is easy enough to patch in locally.

Cool. You can add your patch after applying this series then. (I'll post
a new version addressing the comments in this series.)

Thanks
Kishon


\
 
 \ /
  Last update: 2013-01-23 07:01    [W:0.066 / U:24.812 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site