lkml.org 
[lkml]   [2012]   [Sep]   [30]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v6 1/3] drivers/mfd: Add realtek pcie card reader driver
Hi Wei,

On Tue, Sep 11, 2012 at 12:54:22PM +0800, wei_wang@realsil.com.cn wrote:
> From: Wei WANG <wei_wang@realsil.com.cn>
>
> Realtek PCI-E card reader driver adapts requests from upper-level
> sdmmc/memstick layer to the real physical card reader.
>
> Signed-off-by: Wei WANG <wei_wang@realsil.com.cn>
> Reviewed-by: Arnd Bergmann <arnd@arndb.de>
> Tested-by: Borislav Petkov <bp@alien8.de>
> ---
> drivers/mfd/Kconfig | 9 +
> drivers/mfd/Makefile | 4 +
> drivers/mfd/rts5209.c | 188 ++++++
> drivers/mfd/rts5229.c | 179 ++++++
> drivers/mfd/rtsx_pcr.c | 1345 +++++++++++++++++++++++++++++++++++++++
> drivers/mfd/rtsx_pcr.h | 31 +
> include/linux/mfd/rtsx_common.h | 47 ++
> include/linux/mfd/rtsx_pci.h | 773 ++++++++++++++++++++++
> 8 files changed, 2576 insertions(+)
> create mode 100644 drivers/mfd/rts5209.c
> create mode 100644 drivers/mfd/rts5229.c
> create mode 100644 drivers/mfd/rtsx_pcr.c
> create mode 100644 drivers/mfd/rtsx_pcr.h
> create mode 100644 include/linux/mfd/rtsx_common.h
> create mode 100644 include/linux/mfd/rtsx_pci.h
Although pretty big, the patch looks mostly good to me.
I only have a few comments:

> diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
> index d1facef..4c07a34 100644
> --- a/drivers/mfd/Kconfig
> +++ b/drivers/mfd/Kconfig
> @@ -63,6 +63,15 @@ config MFD_SM501_GPIO
> lines on the SM501. The platform data is used to supply the
> base number for the first GPIO line to register.
>
> +config MFD_RTSX_PCI
> + tristate "Support for Realtek PCI-E driver-based card reader"
> + depends on PCI
> + help
> + This supports for Realtek PCI-Express driver-based card reader including
> + rts5209, rts5229, etc. Realtek driver-based card reader supports access
driver-based ?

> diff --git a/drivers/mfd/rts5209.c b/drivers/mfd/rts5209.c
> new file mode 100644
> index 0000000..6680d6d
> --- /dev/null
> +++ b/drivers/mfd/rts5209.c
> @@ -0,0 +1,188 @@
> +/* Driver for Realtek PCI-Express card reader
> + *
> + * Copyright(c) 2009 Realtek Semiconductor Corp. All rights reserved.
> + *
> + * This program is free software; you can redistribute it and/or modify it
> + * under the terms of the GNU General Public License as published by the
> + * Free Software Foundation; either version 2, or (at your option) any
> + * later version.
> + *
> + * This program is distributed in the hope that it will be useful, but
> + * WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
> + * General Public License for more details.
> + *
> + * You should have received a copy of the GNU General Public License along
> + * with this program; if not, see <http://www.gnu.org/licenses/>.
> + *
> + * Author:
> + * Wei WANG <wei_wang@realsil.com.cn>
> + * No. 450, Shenhu Road, Suzhou Industry Park, Suzhou, China
> + */
> +
> +#include <linux/module.h>
> +#include <linux/mfd/rtsx_pci.h>
> +
> +#include "rtsx_pcr.h"
> +
> +static u8 rts5209_get_ic_version(struct rtsx_pcr *pcr)
> +{
> + u8 val;
> +
> + val = rtsx_pci_readb(pcr, 0x1C);
> + return val & 0x0F;
For your IO accesses, it would e worth looking at the regmap MMIO routines. It
would also simplify your main probe routine.


> +static int rts5209_turn_on_led(struct rtsx_pcr *pcr)
> +{
> + return rtsx_pci_write_register(pcr, 0xFD58, 0x01, 0x00);
You have many hardcoded register adresses around this code. Defining them in
your header file wouldn't hurt.


> +static struct platform_device *rtsx_pci_create_subdev(struct rtsx_pcr *pcr,
> + const char *name, int slot_id)
> +{
> + struct platform_device *p_dev;
> + int err;
> +
> + p_dev = platform_device_alloc(name, pcr->id);
> + if (p_dev == NULL) {
> + dev_dbg(&(pcr->pci->dev), "alloc platform device fail!\n");
> + return NULL;
> + }
> +
> + p_dev->dev.parent = &(pcr->pci->dev);
> + platform_set_drvdata(p_dev, pcr);
> + pcr->slots[slot_id].p_dev = p_dev;
> +
> + err = platform_device_add(p_dev);
> + if (err) {
> + dev_dbg(&(pcr->pci->dev), "add platform device fail!\n");
> + pcr->slots[slot_id].p_dev = NULL;
> + platform_device_put(p_dev);
> + return NULL;
> + }
> +
> + return p_dev;
> +}
Please use the MFD device addition API for that.


> +static irqreturn_t rtsx_pci_isr(int irq, void *dev_id)
> +{
> + struct rtsx_pcr *pcr = dev_id;
> + u32 int_reg;
> +
> + if (!pcr)
> + return IRQ_NONE;
> +
> + spin_lock(&pcr->lock);
> +
> + int_reg = rtsx_pci_readl(pcr, RTSX_BIPR);
> + /* Clear interrupt flag */
> + rtsx_pci_writel(pcr, RTSX_BIPR, int_reg);
> + if ((int_reg & pcr->bier) == 0) {
> + spin_unlock(&pcr->lock);
> + return IRQ_NONE;
> + }
> + if (int_reg == 0xFFFFFFFF) {
> + spin_unlock(&pcr->lock);
> + return IRQ_HANDLED;
> + }
> +
> + int_reg &= (pcr->bier | 0x7FFFFF);
> +
> + if (int_reg & SD_INT) {
> + if (int_reg & SD_EXIST) {
> + pcr->need_reset |= SD_EXIST;
> + } else {
> + pcr->need_release |= SD_EXIST;
> + pcr->need_reset &= ~SD_EXIST;
> + }
> + }
> +
> + if (int_reg & MS_INT) {
> + if (int_reg & MS_EXIST) {
> + pcr->need_reset |= MS_EXIST;
> + } else {
> + pcr->need_release |= MS_EXIST;
> + pcr->need_reset &= ~MS_EXIST;
> + }
> + }
> +
> + if (pcr->need_reset || pcr->need_release)
> + queue_delayed_work(workqueue, &pcr->carddet_work,
> + msecs_to_jiffies(200));
Why do we need a delayed work here ?


> +static void rtsx_pci_enter_idle(unsigned long __data)
> +{
> + struct rtsx_pcr *pcr = (struct rtsx_pcr *)__data;
> +
> + queue_work(workqueue, &pcr->idle_work);
> +}
OT: We need threaded timers...


> +static int __init rtsx_pci_drv_init(void)
> +{
> + workqueue = create_freezable_workqueue("rtsx_pci_wq");
> + if (!workqueue)
> + return -ENOMEM;
Are you sure you really need to create your won workqueue ? My guess is that
you probably don't.

Cheers,
Samuel.

--
Intel Open Source Technology Centre
http://oss.intel.com/


\
 
 \ /
  Last update: 2012-10-01 01:21    [W:0.090 / U:0.116 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site