lkml.org 
[lkml]   [2012]   [Sep]   [25]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v2] pwm_backlight: Add device tree support for Low Threshold Brightness
On 09/24/2012 10:29 PM, Philip, Avinash wrote:
> On Fri, Sep 21, 2012 at 23:13:39, Stephen Warren wrote:
>> On 09/21/2012 12:03 AM, Philip, Avinash wrote:
>>> Hi Stephen,
>>>
>>> On Fri, Sep 21, 2012 at 10:46:45, Stephen Warren wrote:
>>>> On 09/20/2012 10:51 PM, Philip, Avinash wrote:
>>>>> Some backlights perform poorly when driven by a PWM with a short
>>>>> duty-cycle. For such devices, the low threshold can be used to specify a
>>>>> lower bound for the duty-cycle and should be chosen to exclude the
>>>>> problematic range.
>>>>>
>>>>> This patch adds support for an optional low-threshold-brightness
>>>>> property.
>>>>
>>>>> diff --git a/Documentation/devicetree/bindings/video/backlight/pwm-backlight.txt b/Documentation/devicetree/bindings/video/backlight/pwm-backlight.txt
>>>>
>>>>> Optional properties:
>>>>> - pwm-names: a list of names for the PWM devices specified in the
>>>>> "pwms" property (see PWM binding[0])
>>>>> + - low-threshold-brightness: brightness threshold low level. Low threshold
>>>>> + brightness set to value so that backlight present on low end of
>>>>> + brightness.
>>>>
>>>> For my education, why not just specify values above this value in the
>>>> brightness-levels array; how do those two interact?
>>>
>>> Please find details from
>>> https://lkml.org/lkml/2012/7/18/284
>>
>> Hmm. That still doesn't really explain what this property does.
>>
>> I'm going to guess that if this property is present, and values in the
>> brightness-levels property get scaled between the
>> low-threshold-brightness and 255 instead of being used directly.
>
> This is correct.
>
>> But then, in the email you linked to, what does "But brightness-levels won't
>> be uniformly divided" mean?
>
> For some panels, backlight would absent on low end of brightness due to low
> percentage in duty_cycle. Consider following example where backlight absent
> for brightness levels from 0 - 51.
>
> pwms = <&pwm 0 50000>;
> brightness-levels = <0 51 53 56 62 75 101 152 255>;
> default-brightness-level = <6>;
>
> So in the example, brightness-levels are set to have values for backlight present.
> Here levels are not uniformly divided.

So why not just change the values so they /are/ what you want? After
all, it's just data and you can put whatever values you want there. What
is preventing you from doing this?

Perhaps e.g.:

brightness-levels = <0 101 106 112 124 150 202 304 511>;
(just multiplying everything by N, for arbitrary N=2, to get extra
precision)

... plus whatever adjustments are required to make the data "uniformly
divided", which I can't do in the example here since I'd need to know
whatever non-linear equation characterizes the backlight's PWM % duty
cycle to perceived brightness mapping.

The only thing that could be preventing this is mathematical precision.
While all the PWM DT examples I've seen have brightness-levels range
from 0..255, I don't think there is any such actual limit; you could
range from say 0..1000000 if you wanted, right?

>> Either way, the DT binding should explain exactly what this value is
>> used for, and how it affects the interpretation of values in
>> brightness-levels.
>
> Is DT binding documentation a good place to explain this feature?
> Initially Thierry suggested document option. So I left out.

The binding documents are supposed to be a standalone description of
what the data in DT does; given general no-Linux-specific domain
knowledge, the binding document should be detailed enough for someone to
understand how to fill in the DT. So, yes, I think the binding document
would be a great place to put such documentation.


\
 
 \ /
  Last update: 2012-09-25 09:01    [W:1.260 / U:0.552 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site