lkml.org 
[lkml]   [2012]   [Sep]   [24]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH] media: davinci: vpif: display: separate out subdev from output
Hi Hans,

Thanks for the review.

On Mon, Sep 24, 2012 at 3:39 PM, Hans Verkuil <hverkuil@xs4all.nl> wrote:
> On Mon September 24 2012 12:02:26 Prabhakar wrote:
>> From: Lad, Prabhakar <prabhakar.lad@ti.com>
>>
>> vpif_display relied on a 1-1 mapping of output and subdev. This is not
>> necessarily the case. Separate the two. So there is a list of subdevs
>> and a list of outputs. Each output refers to a subdev and has routing
>> information. An output does not have to have a subdev.
>>
>> The initial output for each channel is set to the fist output.
>>
>> Currently missing is support for associating multiple subdevs with
>> an output.
>>
>> Signed-off-by: Lad, Prabhakar <prabhakar.lad@ti.com>
>> Signed-off-by: Manjunath Hadli <manjunath.hadli@ti.com>
>> Cc: Hans Verkuil <hans.verkuil@cisco.com>
>> ---
>> This patch is dependent on the patch series from Hans
>> (http://www.mail-archive.com/linux-media@vger.kernel.org/msg52270.html)
>>
>> arch/arm/mach-davinci/board-da850-evm.c | 29 +++++-
>> arch/arm/mach-davinci/board-dm646x-evm.c | 39 ++++++-
>> drivers/media/platform/davinci/vpif_display.c | 138 ++++++++++++++++++++-----
>> include/media/davinci/vpif_types.h | 20 +++-
>> 4 files changed, 185 insertions(+), 41 deletions(-)
>>
>> diff --git a/arch/arm/mach-davinci/board-da850-evm.c b/arch/arm/mach-davinci/board-da850-evm.c
>> index 3081ea4..23a7012 100644
>> --- a/arch/arm/mach-davinci/board-da850-evm.c
>> +++ b/arch/arm/mach-davinci/board-da850-evm.c
>> @@ -46,6 +46,7 @@
>> #include <mach/spi.h>
>>
>> #include <media/tvp514x.h>
>> +#include <media/adv7343.h>
>>
>> #define DA850_EVM_PHY_ID "davinci_mdio-0:00"
>> #define DA850_LCD_PWR_PIN GPIO_TO_PIN(2, 8)
>> @@ -1257,16 +1258,34 @@ static struct vpif_subdev_info da850_vpif_subdev[] = {
>> },
>> };
>>
>> -static const char const *vpif_output[] = {
>> - "Composite",
>> - "S-Video",
>> +static const struct vpif_output da850_ch0_outputs[] = {
>> + {
>> + .output = {
>> + .index = 0,
>> + .name = "Composite",
>> + .type = V4L2_OUTPUT_TYPE_ANALOG,
>> + },
>> + .subdev_name = "adv7343",
>> + .output_route = ADV7343_COMPOSITE_ID,
>> + },
>> + {
>> + .output = {
>> + .index = 1,
>> + .name = "S-Video",
>> + .type = V4L2_OUTPUT_TYPE_ANALOG,
>> + },
>> + .subdev_name = "adv7343",
>> + .output_route = ADV7343_SVIDEO_ID,
>> + },
>> };
>>
>> static struct vpif_display_config da850_vpif_display_config = {
>> .subdevinfo = da850_vpif_subdev,
>> .subdev_count = ARRAY_SIZE(da850_vpif_subdev),
>> - .output = vpif_output,
>> - .output_count = ARRAY_SIZE(vpif_output),
>> + .chan_config[0] = {
>> + .outputs = da850_ch0_outputs,
>> + .output_count = ARRAY_SIZE(da850_ch0_outputs),
>> + },
>> .card_name = "DA850/OMAP-L138 Video Display",
>> };
>>
>> diff --git a/arch/arm/mach-davinci/board-dm646x-evm.c b/arch/arm/mach-davinci/board-dm646x-evm.c
>> index ad249c7..c206768 100644
>> --- a/arch/arm/mach-davinci/board-dm646x-evm.c
>> +++ b/arch/arm/mach-davinci/board-dm646x-evm.c
>> @@ -26,6 +26,7 @@
>> #include <linux/i2c/pcf857x.h>
>>
>> #include <media/tvp514x.h>
>> +#include <media/adv7343.h>
>>
>> #include <linux/mtd/mtd.h>
>> #include <linux/mtd/nand.h>
>> @@ -496,18 +497,44 @@ static struct vpif_subdev_info dm646x_vpif_subdev[] = {
>> },
>> };
>>
>> -static const char *output[] = {
>> - "Composite",
>> - "Component",
>> - "S-Video",
>> +static const struct vpif_output dm6467_ch0_outputs[] = {
>> + {
>> + .output = {
>> + .index = 0,
>> + .name = "Composite",
>> + .type = V4L2_OUTPUT_TYPE_ANALOG,
>> + },
>> + .subdev_name = "adv7343",
>> + .output_route = ADV7343_COMPOSITE_ID,
>> + },
>> + {
>> + .output = {
>> + .index = 1,
>> + .name = "Component",
>> + .type = V4L2_OUTPUT_TYPE_ANALOG,
>> + },
>> + .subdev_name = "adv7343",
>> + .output_route = ADV7343_COMPONENT_ID,
>> + },
>> + {
>> + .output = {
>> + .index = 2,
>> + .name = "S-Video",
>> + .type = V4L2_OUTPUT_TYPE_ANALOG,
>> + },
>> + .subdev_name = "adv7343",
>> + .output_route = ADV7343_SVIDEO_ID,
>> + },
>> };
>>
>> static struct vpif_display_config dm646x_vpif_display_config = {
>> .set_clock = set_vpif_clock,
>> .subdevinfo = dm646x_vpif_subdev,
>> .subdev_count = ARRAY_SIZE(dm646x_vpif_subdev),
>> - .output = output,
>> - .output_count = ARRAY_SIZE(output),
>> + .chan_config[0] = {
>> + .outputs = dm6467_ch0_outputs,
>> + .output_count = ARRAY_SIZE(dm6467_ch0_outputs),
>> + },
>> .card_name = "DM646x EVM",
>> };
>>
>> diff --git a/drivers/media/platform/davinci/vpif_display.c b/drivers/media/platform/davinci/vpif_display.c
>> index 8d1ce09..b218f3a 100644
>> --- a/drivers/media/platform/davinci/vpif_display.c
>> +++ b/drivers/media/platform/davinci/vpif_display.c
>> @@ -308,7 +308,7 @@ static int vpif_start_streaming(struct vb2_queue *vq, unsigned int count)
>> channel2_intr_assert();
>> channel2_intr_enable(1);
>> enable_channel2(1);
>> - if (vpif_config_data->ch2_clip_en)
>> + if (vpif_config_data->chan_config[VPIF_CHANNEL2_VIDEO].clip_en)
>> channel2_clipping_enable(1);
>> }
>>
>> @@ -317,7 +317,7 @@ static int vpif_start_streaming(struct vb2_queue *vq, unsigned int count)
>> channel3_intr_assert();
>> channel3_intr_enable(1);
>> enable_channel3(1);
>> - if (vpif_config_data->ch3_clip_en)
>> + if (vpif_config_data->chan_config[VPIF_CHANNEL3_VIDEO].clip_en)
>> channel3_clipping_enable(1);
>> }
>>
>> @@ -1174,14 +1174,16 @@ static int vpif_streamoff(struct file *file, void *priv,
>> if (buftype == V4L2_BUF_TYPE_VIDEO_OUTPUT) {
>> /* disable channel */
>> if (VPIF_CHANNEL2_VIDEO == ch->channel_id) {
>> - if (vpif_config_data->ch2_clip_en)
>> + if (vpif_config_data->
>> + chan_config[VPIF_CHANNEL2_VIDEO].clip_en)
>> channel2_clipping_enable(0);
>> enable_channel2(0);
>> channel2_intr_enable(0);
>> }
>> if ((VPIF_CHANNEL3_VIDEO == ch->channel_id) ||
>> (2 == common->started)) {
>> - if (vpif_config_data->ch3_clip_en)
>> + if (vpif_config_data->
>> + chan_config[VPIF_CHANNEL3_VIDEO].clip_en)
>> channel3_clipping_enable(0);
>> enable_channel3(0);
>> channel3_intr_enable(0);
>> @@ -1214,41 +1216,120 @@ static int vpif_enum_output(struct file *file, void *fh,
>> {
>>
>> struct vpif_display_config *config = vpif_dev->platform_data;
>> + struct vpif_display_chan_config *chan_cfg;
>> + struct vpif_fh *vpif_handler = fh;
>> + struct channel_obj *ch = vpif_handler->channel;
>>
>> - if (output->index >= config->output_count) {
>> + chan_cfg = &config->chan_config[ch->channel_id];
>> + if (output->index >= chan_cfg->output_count) {
>> vpif_dbg(1, debug, "Invalid output index\n");
>> return -EINVAL;
>> }
>>
>> - strcpy(output->name, config->output[output->index]);
>> - output->type = V4L2_OUTPUT_TYPE_ANALOG;
>> + memcpy(output, &chan_cfg->outputs[output->index].output,
>> + sizeof(*output));
>> output->std = VPIF_V4L2_STD;
>>
>> return 0;
>> }
>>
>> +/**
>> + * vpif_output_to_subdev() - Maps output to sub device
>> + * @vpif_cfg - global config ptr
>> + * @chan_cfg - channel config ptr
>> + * @index - Given output index from application
>> + *
>> + * lookup the sub device information for a given output index.
>> + * we report all the output to application. output table also
>> + * has sub device name for the each output
>> + */
>> +static int
>> +vpif_output_to_subdev(struct vpif_display_config *vpif_cfg,
>> + struct vpif_display_chan_config *chan_cfg, int index)
>> +{
>> + struct vpif_subdev_info *subdev_info;
>> + const char *subdev_name;
>> + int i;
>> +
>> + vpif_dbg(2, debug, "vpif_output_to_subdev\n");
>> +
>> + if (chan_cfg->outputs == NULL)
>> + return -1;
>> +
>> + subdev_name = chan_cfg->outputs[index].subdev_name;
>> + if (subdev_name == NULL)
>> + return -1;
>> +
>> + /* loop through the sub device list to get the sub device info */
>> + for (i = 0; i < vpif_cfg->subdev_count; i++) {
>> + subdev_info = &vpif_cfg->subdevinfo[i];
>> + if (!strcmp(subdev_info->name, subdev_name))
>> + return i;
>> + }
>> + return -1;
>> +}
>> +
>> +/**
>> + * vpif_set_output() - Select an output
>> + * @vpif_cfg - global config ptr
>> + * @ch - channel
>> + * @index - Given output index from application
>> + *
>> + * Select the given output.
>> + */
>> +static int vpif_set_output(struct vpif_display_config *vpif_cfg,
>> + struct channel_obj *ch, int index)
>> +{
>> + struct vpif_display_chan_config *chan_cfg =
>> + &vpif_cfg->chan_config[ch->channel_id];
>> + struct vpif_subdev_info *subdev_info = NULL;
>> + struct v4l2_subdev *sd = NULL;
>> + u32 input = 0, output = 0;
>> + int sd_index;
>> + int ret;
>> +
>> + sd_index = vpif_output_to_subdev(vpif_cfg, chan_cfg, index);
>> + if (sd_index >= 0) {
>> + sd = vpif_obj.sd[sd_index];
>> + subdev_info = &vpif_cfg->subdevinfo[sd_index];
>> + }
>> +
>> + if (sd) {
>> + input = chan_cfg->outputs[index].input_route;
>> + output = chan_cfg->outputs[index].output_route;
>> + ret = v4l2_device_call_until_err(&vpif_obj.v4l2_dev, 1, video,
>> + s_routing, input, output, 0);
>
> Darn, I should have checked this when I did my previous review. You should
> use v4l2_subdev_call(sd, ...) here. The s_routing op is one where you cannot
> just try and call all subdevs, you need to give it to a specific subdev. The
> reason is that the arguments to the s_routing op are subdev specific. And
> since you've got the subdev pointer anyway...
>
Agreed, I'll soon respin v2 with the above change.

Thanks and Regards,
--Prabhakar Lad

> Regards,
>
> Hans
>
>> +
>> + if (ret < 0) {
>> + vpif_err("Failed to set output\n");
>> + return ret;
>> + }
>> +
>> + }
>> + ch->output_idx = index;
>> + ch->sd = sd;
>> + return 0;
>> +}
>> +
>> static int vpif_s_output(struct file *file, void *priv, unsigned int i)
>> {
>> + struct vpif_display_config *config = vpif_dev->platform_data;
>> + struct vpif_display_chan_config *chan_cfg;
>> struct vpif_fh *fh = priv;
>> struct channel_obj *ch = fh->channel;
>> struct common_obj *common = &ch->common[VPIF_VIDEO_INDEX];
>> - int ret = 0;
>> +
>> + chan_cfg = &config->chan_config[ch->channel_id];
>> +
>> + if (i >= chan_cfg->output_count)
>> + return -EINVAL;
>>
>> if (common->started) {
>> vpif_err("Streaming in progress\n");
>> return -EBUSY;
>> }
>>
>> - ret = v4l2_device_call_until_err(&vpif_obj.v4l2_dev, 1, video,
>> - s_routing, 0, i, 0);
>> -
>> - if (ret < 0)
>> - vpif_err("Failed to set output standard\n");
>> -
>> - ch->output_idx = i;
>> - if (vpif_obj.sd[i])
>> - ch->sd = vpif_obj.sd[i];
>> - return ret;
>> + return vpif_set_output(config, ch, i);
>> }
>>
>> static int vpif_g_output(struct file *file, void *priv, unsigned int *i)
>> @@ -1291,9 +1372,12 @@ vpif_enum_dv_timings(struct file *file, void *priv,
>> {
>> struct vpif_fh *fh = priv;
>> struct channel_obj *ch = fh->channel;
>> + int ret;
>>
>> - return v4l2_subdev_call(vpif_obj.sd[ch->output_idx],
>> - video, enum_dv_timings, timings);
>> + ret = v4l2_subdev_call(ch->sd, video, enum_dv_timings, timings);
>> + if (ret == -ENOIOCTLCMD && ret == -ENODEV)
>> + return -EINVAL;
>> + return ret;
>> }
>>
>> /**
>> @@ -1320,12 +1404,9 @@ static int vpif_s_dv_timings(struct file *file, void *priv,
>>
>> /* Configure subdevice timings, if any */
>> ret = v4l2_subdev_call(ch->sd, video, s_dv_timings, timings);
>> - if (ret == -ENOIOCTLCMD) {
>> - vpif_dbg(2, debug, "Custom DV timings not supported by "
>> - "subdevice\n");
>> - return -ENODATA;
>> - }
>> - if (ret < 0 && ret != -ENODEV) {
>> + if (ret == -ENOIOCTLCMD || ret == -ENODEV)
>> + ret = 0;
>> + if (ret < 0) {
>> vpif_dbg(2, debug, "Error setting custom DV timings\n");
>> return ret;
>> }
>> @@ -1754,6 +1835,11 @@ static __init int vpif_probe(struct platform_device *pdev)
>> ch->video_dev->lock = &common->lock;
>> video_set_drvdata(ch->video_dev, ch);
>>
>> + /* select output 0 */
>> + err = vpif_set_output(config, ch, 0);
>> + if (err)
>> + goto probe_out;
>> +
>> /* register video device */
>> vpif_dbg(1, debug, "channel=%x,channel->video_dev=%x\n",
>> (int)ch, (int)&ch->video_dev);
>> diff --git a/include/media/davinci/vpif_types.h b/include/media/davinci/vpif_types.h
>> index 65e8fe1..4b297eb 100644
>> --- a/include/media/davinci/vpif_types.h
>> +++ b/include/media/davinci/vpif_types.h
>> @@ -20,6 +20,7 @@
>> #include <linux/i2c.h>
>>
>> #define VPIF_CAPTURE_MAX_CHANNELS 2
>> +#define VPIF_DISPLAY_MAX_CHANNELS 2
>>
>> enum vpif_if_type {
>> VPIF_IF_BT656,
>> @@ -39,15 +40,26 @@ struct vpif_subdev_info {
>> struct i2c_board_info board_info;
>> };
>>
>> +struct vpif_output {
>> + struct v4l2_output output;
>> + const char *subdev_name;
>> + u32 input_route;
>> + u32 output_route;
>> +};
>> +
>> +struct vpif_display_chan_config {
>> + struct vpif_interface vpif_if;
>> + const struct vpif_output *outputs;
>> + int output_count;
>> + bool clip_en;
>> +};
>> +
>> struct vpif_display_config {
>> int (*set_clock)(int, int);
>> struct vpif_subdev_info *subdevinfo;
>> int subdev_count;
>> - const char **output;
>> - int output_count;
>> + struct vpif_display_chan_config chan_config[VPIF_DISPLAY_MAX_CHANNELS];
>> const char *card_name;
>> - bool ch2_clip_en;
>> - bool ch3_clip_en;
>> };
>>
>> struct vpif_input {
>>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-media" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html


\
 
 \ /
  Last update: 2012-09-24 13:01    [W:0.067 / U:1.952 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site