lkml.org 
[lkml]   [2012]   [Sep]   [18]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 3/3] i2c: OMAP fix driver initialization message
Date
The message spit out when the i2c-omap driver load is printing
the platform device's id as a bus number. However when booting
from OF id is -1, which is not so nice.

Fix it by printing the adapter number.

[ 0.210467] omap_i2c 44e0b000.i2c: bus -1 rev2.4.0 at 400 kHz
vs
[ 0.210467] omap_i2c 44e0b000.i2c: bus 0 rev2.4.0 at 400 kHz

Signed-off-by: Pantelis Antoniou <panto@antoniou-consulting.com>
---
drivers/i2c/busses/i2c-omap.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/i2c/busses/i2c-omap.c b/drivers/i2c/busses/i2c-omap.c
index f722478..87bb705 100644
--- a/drivers/i2c/busses/i2c-omap.c
+++ b/drivers/i2c/busses/i2c-omap.c
@@ -1178,9 +1178,6 @@ omap_i2c_probe(struct platform_device *pdev)
goto err_unuse_clocks;
}

- dev_info(dev->dev, "bus %d rev%d.%d.%d at %d kHz\n", pdev->id,
- dev->dtrev, dev->rev >> 4, dev->rev & 0xf, dev->speed);
-
adap = &dev->adapter;
i2c_set_adapdata(adap, dev);
adap->owner = THIS_MODULE;
@@ -1204,6 +1201,9 @@ omap_i2c_probe(struct platform_device *pdev)
if (IS_ERR(pinctrl))
dev_warn(dev->dev, "pins are not configured from the driver\n");

+ dev_info(dev->dev, "bus %d rev%d.%d.%d at %d kHz\n", adap->nr,
+ dev->dtrev, dev->rev >> 4, dev->rev & 0xf, dev->speed);
+
pm_runtime_mark_last_busy(dev->dev);
pm_runtime_put_autosuspend(dev->dev);

--
1.7.12


\
 
 \ /
  Last update: 2012-09-18 21:01    [W:0.099 / U:44.396 seconds]
©2003-2017 Jasper Spaans. hosted at Digital OceanAdvertise on this site