lkml.org 
[lkml]   [2012]   [Sep]   [18]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
Subject0.5sec delay when ttyO0 is enabled
I'm using a BeagleBone, and the linux kernel from Koen Kooi (https://github.com/koenkooi/linux.git).

I have noticed there is a 0.5sec delay between OMAP UART0 being initialised and the console being
enabled.

I'll dig a bit deeper, but can anyone shed light on what the delay is ?

Can this delay be removed ?

My total boot time is only 1.3sec, so a 0.5sec delay is quite significant !?!

Below is the first portion of my boot log.

Thanks for any advice
Mark JACKSON
---
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.2.28+ (mpfj@mpfj-nanobone) (gcc version 4.5.4 (Buildroot
2012.08-git-00388-g7019407) ) #20 Thu Sep 13 16:56:56 BST 2012
[ 0.000000] CPU: ARMv7 Processor [413fc082] revision 2 (ARMv7), cr=50c53c7d
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[ 0.000000] Machine: am335xevm
[ 0.000000] Memory policy: ECC disabled, Data cache writeback
[ 0.000000] AM335X ES1.0 (sgx neon )
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 65024
[ 0.000000] Kernel command line: console=ttyO0,115200n8 root=/dev/mmcblk0p2 ro rootfstype=ext2
rootwait ip=none
[ 0.000000] PID hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
[ 0.000000] Memory: 256MB = 256MB total
[ 0.000000] Memory: 253868k/253868k available, 8276k reserved, 0K highmem
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
[ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
[ 0.000000] vmalloc : 0xd0800000 - 0xff000000 ( 744 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xd0000000 ( 256 MB)
[ 0.000000] modules : 0xbf800000 - 0xc0000000 ( 8 MB)
[ 0.000000] .text : 0xc0008000 - 0xc04ddadc (4951 kB)
[ 0.000000] .init : 0xc04de000 - 0xc0517000 ( 228 kB)
[ 0.000000] .data : 0xc0518000 - 0xc056e3a8 ( 345 kB)
[ 0.000000] .bss : 0xc056e3cc - 0xc05d8a54 ( 426 kB)
[ 0.000000] NR_IRQS:410 nr_irqs:410 410
[ 0.000000] IRQ: Found an INTC at 0xfa200000 (revision 5.0) with 128 interrupts
[ 0.000000] Total of 128 interrupts on 1 active controller
[ 0.000000] OMAP clockevent source: GPTIMER2 at 24000000 Hz
[ 0.000000] OMAP clocksource: GPTIMER1 at 32768 Hz
[ 0.000000] sched_clock: 32 bits at 32kHz, resolution 30517ns, wraps every 131071999ms
[ 0.000000] Console: colour dummy device 80x30
[ 0.000183] Calibrating delay loop... 498.89 BogoMIPS (lpj=2494464)
[ 0.058166] pid_max: default: 32768 minimum: 301
[ 0.058319] Security Framework initialized
[ 0.058410] Mount-cache hash table entries: 512
[ 0.058837] Initializing cgroup subsys cpuacct
[ 0.058898] Initializing cgroup subsys devices
[ 0.058898] Initializing cgroup subsys freezer
[ 0.058990] CPU: Testing write buffer coherency: ok
[ 0.060180] devtmpfs: initialized
[ 0.080780] omap_hwmod: gfx: failed to hardreset
[ 0.097503] omap_hwmod: pruss: failed to hardreset
[ 0.098114] print_constraints: dummy:
[ 0.098419] NET: Registered protocol family 16
[ 0.099731] OMAP GPIO hardware version 0.1
[ 0.101043] omap_mux_init: Add partition: #1: core, flags: 0
[ 0.102661] omap_i2c.1: alias fck already exists
[ 0.103057] hw-breakpoint: debug architecture 0x4 unsupported.
[ 0.103240] omap2_mcspi.1: alias fck already exists
[ 0.103393] omap2_mcspi.2: alias fck already exists
[ 0.103607] edma.0: alias fck already exists
[ 0.103637] edma.0: alias fck already exists
[ 0.103668] edma.0: alias fck already exists
[ 0.103759] cape: pcm register
[ 0.114685] bio: create slab <bio-0> at 0
[ 0.116027] SCSI subsystem initialized
[ 0.117004] usbcore: registered new interface driver usbfs
[ 0.117156] usbcore: registered new interface driver hub
[ 0.117340] usbcore: registered new device driver usb
[ 0.117523] musb-ti81xx musb-ti81xx: musb0, board_mode=0x13, plat_mode=0x3
[ 0.117675] musb-ti81xx musb-ti81xx: musb1, board_mode=0x13, plat_mode=0x1
[ 0.118316] omap_i2c omap_i2c.1: bus 1 rev2.4.0 at 100 kHz
[ 0.119598] Advanced Linux Sound Architecture Driver Version 1.0.24.
[ 0.120239] Switching to clocksource gp timer
[ 0.148681] musb-hdrc: version 6.0, ?dma?, otg (peripheral+host)
[ 0.148895] musb-hdrc musb-hdrc.0: dma type: pio
[ 0.149078] MUSB0 controller's USBSS revision = 4ea20800
[ 0.149627] musb-hdrc musb-hdrc.0: USB OTG mode controller at d081c000 using PIO, IRQ 18
[ 0.149932] musb-hdrc musb-hdrc.1: dma type: pio
[ 0.150115] MUSB1 controller's USBSS revision = 4ea20800
[ 0.150268] musb-hdrc musb-hdrc.1: MUSB HDRC host driver
[ 0.150451] musb-hdrc musb-hdrc.1: new USB bus registered, assigned bus number 1
[ 0.150604] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.150634] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.150665] usb usb1: Product: MUSB HDRC host driver
[ 0.150665] usb usb1: Manufacturer: Linux 3.2.28+ musb-hcd
[ 0.150695] usb usb1: SerialNumber: musb-hdrc.1
[ 0.151519] hub 1-0:1.0: USB hub found
[ 0.151550] hub 1-0:1.0: 1 port detected
[ 0.152099] musb-hdrc musb-hdrc.1: USB Host mode controller at d081e800 using PIO, IRQ 19
[ 0.152557] NET: Registered protocol family 2
[ 0.152801] IP route cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.153289] TCP established hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.153503] TCP bind hash table entries: 8192 (order: 3, 32768 bytes)
[ 0.153656] TCP: Hash tables configured (established 8192 bind 8192)
[ 0.153656] TCP reno registered
[ 0.153686] UDP hash table entries: 256 (order: 0, 4096 bytes)
[ 0.153717] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[ 0.154052] NET: Registered protocol family 1
[ 0.154449] RPC: Registered named UNIX socket transport module.
[ 0.154479] RPC: Registered udp transport module.
[ 0.154479] RPC: Registered tcp transport module.
[ 0.154510] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.156555] audit: initializing netlink socket (disabled)
[ 0.156616] type=2000 audit(0.150:1): initialized
[ 0.158172] VFS: Disk quotas dquot_6.5.2
[ 0.158264] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.159545] msgmni has been set to 495
[ 0.161010] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 0.161041] io scheduler noop registered
[ 0.161071] io scheduler deadline registered
[ 0.161132] io scheduler cfq registered (default)
[ 0.162231] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.163848] omap_uart.0: ttyO0 at MMIO 0x44e09000 (irq = 72) is a OMAP UART0
[ 0.757232] console [ttyO0] enabled
[ 0.761535] omap_uart.1: ttyO1 at MMIO 0x48022000 (irq = 73) is a OMAP UART1
[ 0.769409] omap_uart.2: ttyO2 at MMIO 0x48024000 (irq = 74) is a OMAP UART2
[ 0.777282] omap_uart.3: ttyO3 at MMIO 0x481a6000 (irq = 44) is a OMAP UART3
[ 0.785156] omap_uart.4: ttyO4 at MMIO 0x481a8000 (irq = 45) is a OMAP UART4
[ 0.792999] omap_uart.5: ttyO5 at MMIO 0x481aa000 (irq = 46) is a OMAP UART5
...


\
 
 \ /
  Last update: 2012-09-18 13:21    [W:0.038 / U:3.536 seconds]
©2003-2017 Jasper Spaans. hosted at Digital OceanAdvertise on this site