lkml.org 
[lkml]   [2012]   [Sep]   [11]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 2/2] can: janz-ican3: fix support for older hardware revisions
Date
From: "Ira W. Snyder" <iws@ovro.caltech.edu>

The Revision 1.0 Janz CMOD-IO Carrier Board does not have support for
the reset registers. To support older hardware, the code is changed to
use the hardware reset register on the Janz VMOD-ICAN3 hardware itself.

Signed-off-by: Ira W. Snyder <iws@ovro.caltech.edu>
---
drivers/net/can/janz-ican3.c | 4 +---
1 files changed, 1 insertions(+), 3 deletions(-)

diff --git a/drivers/net/can/janz-ican3.c b/drivers/net/can/janz-ican3.c
index 98ee438..7edadee 100644
--- a/drivers/net/can/janz-ican3.c
+++ b/drivers/net/can/janz-ican3.c
@@ -1391,7 +1391,6 @@ static irqreturn_t ican3_irq(int irq, void *dev_id)
*/
static int ican3_reset_module(struct ican3_dev *mod)
{
- u8 val = 1 << mod->num;
unsigned long start;
u8 runold, runnew;

@@ -1405,8 +1404,7 @@ static int ican3_reset_module(struct ican3_dev *mod)
runold = ioread8(mod->dpm + TARGET_RUNNING);

/* reset the module */
- iowrite8(val, &mod->ctrl->reset_assert);
- iowrite8(val, &mod->ctrl->reset_deassert);
+ iowrite8(0x00, &mod->dpmctrl->hwreset);

/* wait until the module has finished resetting and is running */
start = jiffies;
--
1.7.8.6


\
 
 \ /
  Last update: 2012-09-12 01:41    [W:0.065 / U:0.504 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site