lkml.org 
[lkml]   [2012]   [Aug]   [9]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v7 4/8] fsl-dma: move functions to avoid forward declarations
Date
From: Qiang Liu <qiang.liu@freescale.com>

These functions will be modified in the next patch in the series. By
moving the function in a patch separate from the changes, it will make
review easier.

Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Dan Williams <dan.j.williams@gmail.com>
Cc: Vinod Koul <vinod.koul@intel.com>
Cc: Li Yang <leoli@freescale.com>
Signed-off-by: Ira W. Snyder <iws@ovro.caltech.edu>
Signed-off-by: Qiang Liu <qiang.liu@freescale.com>
---
drivers/dma/fsldma.c | 230 +++++++++++++++++++++++++-------------------------
1 files changed, 115 insertions(+), 115 deletions(-)

diff --git a/drivers/dma/fsldma.c b/drivers/dma/fsldma.c
index d4720d3..36490a3 100644
--- a/drivers/dma/fsldma.c
+++ b/drivers/dma/fsldma.c
@@ -472,6 +472,121 @@ static struct fsl_desc_sw *fsl_dma_alloc_descriptor(struct fsldma_chan *chan)
}

/**
+ * fsl_chan_xfer_ld_queue - transfer any pending transactions
+ * @chan : Freescale DMA channel
+ *
+ * HARDWARE STATE: idle
+ * LOCKING: must hold chan->desc_lock
+ */
+static void fsl_chan_xfer_ld_queue(struct fsldma_chan *chan)
+{
+ struct fsl_desc_sw *desc;
+
+ /*
+ * If the list of pending descriptors is empty, then we
+ * don't need to do any work at all
+ */
+ if (list_empty(&chan->ld_pending)) {
+ chan_dbg(chan, "no pending LDs\n");
+ return;
+ }
+
+ /*
+ * The DMA controller is not idle, which means that the interrupt
+ * handler will start any queued transactions when it runs after
+ * this transaction finishes
+ */
+ if (!chan->idle) {
+ chan_dbg(chan, "DMA controller still busy\n");
+ return;
+ }
+
+ /*
+ * If there are some link descriptors which have not been
+ * transferred, we need to start the controller
+ */
+
+ /*
+ * Move all elements from the queue of pending transactions
+ * onto the list of running transactions
+ */
+ chan_dbg(chan, "idle, starting controller\n");
+ desc = list_first_entry(&chan->ld_pending, struct fsl_desc_sw, node);
+ list_splice_tail_init(&chan->ld_pending, &chan->ld_running);
+
+ /*
+ * The 85xx DMA controller doesn't clear the channel start bit
+ * automatically at the end of a transfer. Therefore we must clear
+ * it in software before starting the transfer.
+ */
+ if ((chan->feature & FSL_DMA_IP_MASK) == FSL_DMA_IP_85XX) {
+ u32 mode;
+
+ mode = DMA_IN(chan, &chan->regs->mr, 32);
+ mode &= ~FSL_DMA_MR_CS;
+ DMA_OUT(chan, &chan->regs->mr, mode, 32);
+ }
+
+ /*
+ * Program the descriptor's address into the DMA controller,
+ * then start the DMA transaction
+ */
+ set_cdar(chan, desc->async_tx.phys);
+ get_cdar(chan);
+
+ dma_start(chan);
+ chan->idle = false;
+}
+
+/**
+ * fsldma_cleanup_descriptor - cleanup and free a single link descriptor
+ * @chan: Freescale DMA channel
+ * @desc: descriptor to cleanup and free
+ *
+ * This function is used on a descriptor which has been executed by the DMA
+ * controller. It will run any callbacks, submit any dependencies, and then
+ * free the descriptor.
+ */
+static void fsldma_cleanup_descriptor(struct fsldma_chan *chan,
+ struct fsl_desc_sw *desc)
+{
+ struct dma_async_tx_descriptor *txd = &desc->async_tx;
+ struct device *dev = chan->common.device->dev;
+ dma_addr_t src = get_desc_src(chan, desc);
+ dma_addr_t dst = get_desc_dst(chan, desc);
+ u32 len = get_desc_cnt(chan, desc);
+
+ /* Run the link descriptor callback function */
+ if (txd->callback) {
+#ifdef FSL_DMA_LD_DEBUG
+ chan_dbg(chan, "LD %p callback\n", desc);
+#endif
+ txd->callback(txd->callback_param);
+ }
+
+ /* Run any dependencies */
+ dma_run_dependencies(txd);
+
+ /* Unmap the dst buffer, if requested */
+ if (!(txd->flags & DMA_COMPL_SKIP_DEST_UNMAP)) {
+ if (txd->flags & DMA_COMPL_DEST_UNMAP_SINGLE)
+ dma_unmap_single(dev, dst, len, DMA_FROM_DEVICE);
+ else
+ dma_unmap_page(dev, dst, len, DMA_FROM_DEVICE);
+ }
+
+ /* Unmap the src buffer, if requested */
+ if (!(txd->flags & DMA_COMPL_SKIP_SRC_UNMAP)) {
+ if (txd->flags & DMA_COMPL_SRC_UNMAP_SINGLE)
+ dma_unmap_single(dev, src, len, DMA_TO_DEVICE);
+ else
+ dma_unmap_page(dev, src, len, DMA_TO_DEVICE);
+ }
+
+ fsl_dma_free_descriptor(chan, desc);
+}
+
+/**
* fsl_dma_alloc_chan_resources - Allocate resources for DMA channel.
* @chan : Freescale DMA channel
*
@@ -816,121 +931,6 @@ static int fsl_dma_device_control(struct dma_chan *dchan,
}

/**
- * fsldma_cleanup_descriptor - cleanup and free a single link descriptor
- * @chan: Freescale DMA channel
- * @desc: descriptor to cleanup and free
- *
- * This function is used on a descriptor which has been executed by the DMA
- * controller. It will run any callbacks, submit any dependencies, and then
- * free the descriptor.
- */
-static void fsldma_cleanup_descriptor(struct fsldma_chan *chan,
- struct fsl_desc_sw *desc)
-{
- struct dma_async_tx_descriptor *txd = &desc->async_tx;
- struct device *dev = chan->common.device->dev;
- dma_addr_t src = get_desc_src(chan, desc);
- dma_addr_t dst = get_desc_dst(chan, desc);
- u32 len = get_desc_cnt(chan, desc);
-
- /* Run the link descriptor callback function */
- if (txd->callback) {
-#ifdef FSL_DMA_LD_DEBUG
- chan_dbg(chan, "LD %p callback\n", desc);
-#endif
- txd->callback(txd->callback_param);
- }
-
- /* Run any dependencies */
- dma_run_dependencies(txd);
-
- /* Unmap the dst buffer, if requested */
- if (!(txd->flags & DMA_COMPL_SKIP_DEST_UNMAP)) {
- if (txd->flags & DMA_COMPL_DEST_UNMAP_SINGLE)
- dma_unmap_single(dev, dst, len, DMA_FROM_DEVICE);
- else
- dma_unmap_page(dev, dst, len, DMA_FROM_DEVICE);
- }
-
- /* Unmap the src buffer, if requested */
- if (!(txd->flags & DMA_COMPL_SKIP_SRC_UNMAP)) {
- if (txd->flags & DMA_COMPL_SRC_UNMAP_SINGLE)
- dma_unmap_single(dev, src, len, DMA_TO_DEVICE);
- else
- dma_unmap_page(dev, src, len, DMA_TO_DEVICE);
- }
-
- fsl_dma_free_descriptor(chan, desc);
-}
-
-/**
- * fsl_chan_xfer_ld_queue - transfer any pending transactions
- * @chan : Freescale DMA channel
- *
- * HARDWARE STATE: idle
- * LOCKING: must hold chan->desc_lock
- */
-static void fsl_chan_xfer_ld_queue(struct fsldma_chan *chan)
-{
- struct fsl_desc_sw *desc;
-
- /*
- * If the list of pending descriptors is empty, then we
- * don't need to do any work at all
- */
- if (list_empty(&chan->ld_pending)) {
- chan_dbg(chan, "no pending LDs\n");
- return;
- }
-
- /*
- * The DMA controller is not idle, which means that the interrupt
- * handler will start any queued transactions when it runs after
- * this transaction finishes
- */
- if (!chan->idle) {
- chan_dbg(chan, "DMA controller still busy\n");
- return;
- }
-
- /*
- * If there are some link descriptors which have not been
- * transferred, we need to start the controller
- */
-
- /*
- * Move all elements from the queue of pending transactions
- * onto the list of running transactions
- */
- chan_dbg(chan, "idle, starting controller\n");
- desc = list_first_entry(&chan->ld_pending, struct fsl_desc_sw, node);
- list_splice_tail_init(&chan->ld_pending, &chan->ld_running);
-
- /*
- * The 85xx DMA controller doesn't clear the channel start bit
- * automatically at the end of a transfer. Therefore we must clear
- * it in software before starting the transfer.
- */
- if ((chan->feature & FSL_DMA_IP_MASK) == FSL_DMA_IP_85XX) {
- u32 mode;
-
- mode = DMA_IN(chan, &chan->regs->mr, 32);
- mode &= ~FSL_DMA_MR_CS;
- DMA_OUT(chan, &chan->regs->mr, mode, 32);
- }
-
- /*
- * Program the descriptor's address into the DMA controller,
- * then start the DMA transaction
- */
- set_cdar(chan, desc->async_tx.phys);
- get_cdar(chan);
-
- dma_start(chan);
- chan->idle = false;
-}
-
-/**
* fsl_dma_memcpy_issue_pending - Issue the DMA start command
* @chan : Freescale DMA channel
*/
--
1.7.5.1



\
 
 \ /
  Last update: 2012-08-09 11:22    [W:0.032 / U:0.240 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site