lkml.org 
[lkml]   [2012]   [Aug]   [21]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v2 1/3] dmaengine: add TI EDMA DMA engine driver
From
Date
On Tue, 2012-08-21 at 14:43 -0400, Matt Porter wrote:
> Add a DMA engine driver for the TI EDMA controller. This driver
> is implemented as a wrapper around the existing DaVinci private
> DMA implementation. This approach allows for incremental conversion
> of each peripheral driver to the DMA engine API. The EDMA driver
> supports slave transfers but does not yet support cyclic transfers.
>
> Signed-off-by: Matt Porter <mporter@ti.com>
mostly looks decent and in shape.

> ---
> +config TI_EDMA
> + tristate "TI EDMA support"
> + depends on ARCH_DAVINCI
> + select DMA_ENGINE
> + select DMA_VIRTUAL_CHANNELS
> + default y
default should be n for new drivers

> + help
> + Enable support for the TI EDMA controller. This DMA
> + engine is found on TI DaVinci and AM33xx parts.
> +
> config ARCH_HAS_ASYNC_TX_FIND_CHANNEL
> bool
>
> +/* Max of 16 segments per channel to conserve PaRAM slots */
> +#define MAX_NR_SG 16
> +#define EDMA_MAX_SLOTS MAX_NR_SG
> +#define EDMA_DESCRIPTORS 16
> +
> +struct edma_desc {
> + struct virt_dma_desc vdesc;
> + struct list_head node;
> +
dummy space?
> + int absync;
> + int pset_nr;
> + struct edmacc_param pset[0];
> +};
> +
> +struct edma_cc;
> +
> +struct edma_chan {
> + struct virt_dma_chan vchan;
> + struct list_head node;
> + struct edma_desc *edesc;
> + struct edma_cc *ecc;
> + int ch_num;
> + bool alloced;
> + int slot[EDMA_MAX_SLOTS];
> +
> + dma_addr_t addr;
> + int addr_width;
> + int maxburst;
> +};
> +

> +/* Dispatch a queued descriptor to the controller (caller holds lock) */
> +static void edma_execute(struct edma_chan *echan)
> +{
> + struct virt_dma_desc *vdesc = vchan_next_desc(&echan->vchan);
> + struct edma_desc *edesc;
> + int i;
> +
> + if (!vdesc) {
> + echan->edesc = NULL;
> + return;
> + }
> +
> + list_del(&vdesc->node);
> +
> + echan->edesc = edesc = to_edma_desc(&vdesc->tx);
> +
> + /* Write descriptor PaRAM set(s) */
> + for (i = 0; i < edesc->pset_nr; i++) {
> + edma_write_slot(echan->slot[i], &edesc->pset[i]);
> + dev_dbg(echan->vchan.chan.device->dev,
> + "\n pset[%d]:\n"
> + " chnum\t%d\n"
> + " slot\t%d\n"
> + " opt\t%08x\n"
> + " src\t%08x\n"
> + " dst\t%08x\n"
> + " abcnt\t%08x\n"
> + " ccnt\t%08x\n"
> + " bidx\t%08x\n"
> + " cidx\t%08x\n"
> + " lkrld\t%08x\n",
> + i, echan->ch_num, echan->slot[i],
> + edesc->pset[i].opt,
> + edesc->pset[i].src,
> + edesc->pset[i].dst,
> + edesc->pset[i].a_b_cnt,
> + edesc->pset[i].ccnt,
> + edesc->pset[i].src_dst_bidx,
> + edesc->pset[i].src_dst_cidx,
> + edesc->pset[i].link_bcntrld);
> + /* Link to the previous slot if not the last set */
> + if (i != (edesc->pset_nr - 1))
> + edma_link(echan->slot[i], echan->slot[i+1]);
> + /* Final pset links to the dummy pset */
> + else
> + edma_link(echan->slot[i], echan->ecc->dummy_slot);
> + }
> +
> + edma_start(echan->ch_num);
> +}
> +
> +static int edma_terminate_all(struct edma_chan *echan)
> +{
> + unsigned long flags;
> + LIST_HEAD(head);
> +
> + spin_lock_irqsave(&echan->vchan.lock, flags);
> +
> + /*
> + * Stop DMA activity: we assume the callback will not be called
> + * after edma_dma() returns (even if it does, it will see
> + * echan->edesc is NULL and exit.)
> + */
> + if (echan->edesc) {
> + echan->edesc = NULL;
> + edma_stop(echan->ch_num);
> + }
> +
> + vchan_get_all_descriptors(&echan->vchan, &head);
> + spin_unlock_irqrestore(&echan->vchan.lock, flags);
> + vchan_dma_desc_free_list(&echan->vchan, &head);
> +
> + return 0;
> +}
> +
> +
> +static int edma_slave_config(struct edma_chan *echan,
> + struct dma_slave_config *config)
> +{
> + if ((config->src_addr_width > DMA_SLAVE_BUSWIDTH_4_BYTES) ||
> + (config->dst_addr_width > DMA_SLAVE_BUSWIDTH_4_BYTES))
> + return -EINVAL;
the indent needs help here
> +
> + if (config->direction == DMA_MEM_TO_DEV) {
> + if (config->dst_addr)
> + echan->addr = config->dst_addr;
> + if (config->dst_addr_width)
> + echan->addr_width = config->dst_addr_width;
> + if (config->dst_maxburst)
> + echan->maxburst = config->dst_maxburst;
> + } else if (config->direction == DMA_DEV_TO_MEM) {
> + if (config->src_addr)
> + echan->addr = config->src_addr;
> + if (config->src_addr_width)
> + echan->addr_width = config->src_addr_width;
> + if (config->src_maxburst)
> + echan->maxburst = config->src_maxburst;
> + }
> +
> + return 0;
> +}
> +
> +static int edma_control(struct dma_chan *chan, enum dma_ctrl_cmd cmd,
> + unsigned long arg)
> +{
> + int ret = 0;
> + struct dma_slave_config *config;
> + struct edma_chan *echan = to_edma_chan(chan);
> +
> + switch (cmd) {
> + case DMA_TERMINATE_ALL:
> + edma_terminate_all(echan);
> + break;
> + case DMA_SLAVE_CONFIG:
> + config = (struct dma_slave_config *)arg;
> + ret = edma_slave_config(echan, config);
> + break;
> + default:
> + ret = -ENOSYS;
> + }
> +
> + return ret;
> +}
> +
> +static struct dma_async_tx_descriptor *edma_prep_slave_sg(
> + struct dma_chan *chan, struct scatterlist *sgl,
> + unsigned int sg_len, enum dma_transfer_direction direction,
> + unsigned long tx_flags, void *context)
> +{
> + struct edma_chan *echan = to_edma_chan(chan);
> + struct device *dev = echan->vchan.chan.device->dev;
> + struct edma_desc *edesc;
> + struct scatterlist *sg;
> + int i;
> + int acnt, bcnt, ccnt, src, dst, cidx;
> + int src_bidx, dst_bidx, src_cidx, dst_cidx;
> +
> + if (unlikely(!echan || !sgl || !sg_len))
> + return NULL;
> +
> + if (echan->addr_width == DMA_SLAVE_BUSWIDTH_UNDEFINED) {
> + dev_err(dev, "Undefined slave buswidth\n");
> + return NULL;
> + }
> +
> + if (sg_len > MAX_NR_SG) {
> + dev_err(dev, "Exceeded max SG segments %d > %d\n",
> + sg_len, MAX_NR_SG);
> + return NULL;
> + }
> +
> + edesc = kzalloc(sizeof(*edesc) + sg_len *
> + sizeof(edesc->pset[0]), GFP_ATOMIC);
> + if (!edesc) {
> + dev_dbg(dev, "Failed to allocate a descriptor\n");
> + return NULL;
> + }
> +
> + edesc->pset_nr = sg_len;
> +
> + for_each_sg(sgl, sg, sg_len, i) {
> + /* Allocate a PaRAM slot, if needed */
> + if (echan->slot[i] < 0) {
> + echan->slot[i] =
> + edma_alloc_slot(EDMA_CTLR(echan->ch_num),
> + EDMA_SLOT_ANY);
> + if (echan->slot[i] < 0) {
> + dev_err(dev, "Failed to allocate slot\n");
> + return NULL;
> + }
> + }
> +
> + acnt = echan->addr_width;
> +
> + /*
> + * If the maxburst is equal to the fifo width, use
> + * A-synced transfers. This allows for large contiguous
> + * buffer transfers using only one PaRAM set.
> + */
> + if (echan->maxburst == 1) {
> + edesc->absync = false;
> + ccnt = sg_dma_len(sg) / acnt / (SZ_64K - 1);
> + bcnt = sg_dma_len(sg) / acnt - ccnt * (SZ_64K - 1);
> + if (bcnt)
> + ccnt++;
> + else
> + bcnt = SZ_64K - 1;
> + cidx = acnt;
> + /*
> + * If maxburst is greater than the fifo address_width,
> + * use AB-synced transfers where A count is the fifo
> + * address_width and B count is the maxburst. In this
> + * case, we are limited to transfers of C count frames
> + * of (address_width * maxburst) where C count is limited
> + * to SZ_64K-1. This places an upper bound on the length
> + * of an SG segment that can be handled.
> + */
> + } else {
> + edesc->absync = true;
> + bcnt = echan->maxburst;
> + ccnt = sg_dma_len(sg) / (acnt * bcnt);
> + if (ccnt > (SZ_64K - 1)) {
> + dev_err(dev, "Exceeded max SG segment size\n");
> + return NULL;
> + }
> + cidx = acnt * bcnt;
> + }
> +
> + if (direction == DMA_MEM_TO_DEV) {
> + src = sg_dma_address(sg);
> + dst = echan->addr;
> + src_bidx = acnt;
> + src_cidx = cidx;
> + dst_bidx = 0;
> + dst_cidx = 0;
> + } else {
> + src = echan->addr;
> + dst = sg_dma_address(sg);
> + src_bidx = 0;
> + src_cidx = 0;
> + dst_bidx = acnt;
> + dst_cidx = cidx;
> + }
> +
> + edesc->pset[i].opt = EDMA_TCC(EDMA_CHAN_SLOT(echan->ch_num));
> + /* Configure A or AB synchronized transfers */
> + if (edesc->absync)
> + edesc->pset[i].opt |= SYNCDIM;
> + /* If this is the last set, enable completion interrupt flag */
> + if (i == sg_len - 1)
> + edesc->pset[i].opt |= TCINTEN;
> +
> + edesc->pset[i].src = src;
> + edesc->pset[i].dst = dst;
> +
> + edesc->pset[i].src_dst_bidx = (dst_bidx << 16) | src_bidx;
> + edesc->pset[i].src_dst_cidx = (dst_cidx << 16) | src_cidx;
> +
> + edesc->pset[i].a_b_cnt = bcnt << 16 | acnt;
> + edesc->pset[i].ccnt = ccnt;
> + edesc->pset[i].link_bcntrld = 0xffffffff;
> +
> + }
> +
> + return vchan_tx_prep(&echan->vchan, &edesc->vdesc, tx_flags);
> +}
> +
> +static void edma_callback(unsigned ch_num, u16 ch_status, void *data)
> +{
> + struct edma_chan *echan = data;
> + struct device *dev = echan->vchan.chan.device->dev;
> + struct edma_desc *edesc;
> + unsigned long flags;
> +
> + /* Stop the channel */
> + edma_stop(echan->ch_num);
> +
> + switch (ch_status) {
> + case DMA_COMPLETE:
> + dev_dbg(dev, "transfer complete on channel %d\n", ch_num);
> +
> + spin_lock_irqsave(&echan->vchan.lock, flags);
> +
> + edesc = echan->edesc;
> + if (edesc) {
> + edma_execute(echan);
> + vchan_cookie_complete(&edesc->vdesc);
> + }
> +
> + spin_unlock_irqrestore(&echan->vchan.lock, flags);
> +
> + break;
> + case DMA_CC_ERROR:
> + dev_dbg(dev, "transfer error on channel %d\n", ch_num);
> + break;
> + default:
> + break;
> + }
> +}
> +
> +/* Alloc channel resources */
> +static int edma_alloc_chan_resources(struct dma_chan *chan)
> +{
> + struct edma_chan *echan = to_edma_chan(chan);
> + struct device *dev = echan->vchan.chan.device->dev;
> + int ret;
> + int a_ch_num;
> + LIST_HEAD(descs);
> +
> + a_ch_num = edma_alloc_channel(echan->ch_num, edma_callback,
> + chan, EVENTQ_DEFAULT);
> +
> + if (a_ch_num < 0) {
> + ret = -ENODEV;
> + goto err_no_chan;
> + }
> +
> + if (a_ch_num != echan->ch_num) {
> + dev_err(dev, "failed to allocate requested channel %u:%u\n",
> + EDMA_CTLR(echan->ch_num),
> + EDMA_CHAN_SLOT(echan->ch_num));
> + ret = -ENODEV;
> + goto err_wrong_chan;
> + }
> +
> + echan->alloced = true;
> + echan->slot[0] = echan->ch_num;
> +
> + dev_info(dev, "allocated channel for %u:%u\n",
> + EDMA_CTLR(echan->ch_num), EDMA_CHAN_SLOT(echan->ch_num));
> +
> + return 0;
> +
> +err_wrong_chan:
> + edma_free_channel(a_ch_num);
> +err_no_chan:
> + return ret;
> +}
> +
> +/* Free channel resources */
> +static void edma_free_chan_resources(struct dma_chan *chan)
> +{
> + struct edma_chan *echan = to_edma_chan(chan);
> + struct device *dev = echan->vchan.chan.device->dev;
perhaps, chan->dev->device
> + int i;
> +
> + /* Terminate transfers */
> + edma_stop(echan->ch_num);
> +
> + vchan_free_chan_resources(&echan->vchan);
> +
> + /* Free EDMA PaRAM slots */
> + for (i = 1; i < EDMA_MAX_SLOTS; i++) {
> + if (echan->slot[i] >= 0) {
> + edma_free_slot(echan->slot[i]);
> + echan->slot[i] = -1;
> + }
> + }
> +
> + /* Free EDMA channel */
> + if (echan->alloced) {
> + edma_free_channel(echan->ch_num);
> + echan->alloced = false;
> + }
> +
> + dev_info(dev, "freeing channel for %u\n", echan->ch_num);
> +}
> +
> +static void __init edma_chan_init(struct edma_cc *ecc,
> + struct dma_device *dma,
> + struct edma_chan *echans)
> +{
> + int i, j;
> + int chcnt = 0;
> +
> + for (i = 0; i < EDMA_CHANS; i++) {
> + struct edma_chan *echan = &echans[chcnt];
> + echan->ch_num = EDMA_CTLR_CHAN(ecc->ctlr, i);
> + echan->ecc = ecc;
> + echan->vchan.desc_free = edma_desc_free;
> +
> + vchan_init(&echan->vchan, dma);
> +
> + INIT_LIST_HEAD(&echan->node);
> + for (j = 0; j < EDMA_MAX_SLOTS; j++)
> + echan->slot[j] = -1;
> +
> + chcnt++;
i see no reason why you cant remove "chcnt" and use "i".
> + }
> +}
> +
> +static void edma_dma_init(struct edma_cc *ecc, struct dma_device *dma,
> + struct device *dev)
> +{
> + if (dma_has_cap(DMA_SLAVE, dma->cap_mask))
> + dma->device_prep_slave_sg = edma_prep_slave_sg;
You have set DMA_SLAVE unconditionally in your probe, so this seems
bogus.
> +
> + dma->device_alloc_chan_resources = edma_alloc_chan_resources;
> + dma->device_free_chan_resources = edma_free_chan_resources;
> + dma->device_issue_pending = edma_issue_pending;
> + dma->device_tx_status = edma_tx_status;
> + dma->device_control = edma_control;
> + dma->dev = dev;
> +
> + INIT_LIST_HEAD(&dma->channels);
> +}
> +
> +static int __devinit edma_probe(struct platform_device *pdev)
> +{
> + struct edma_cc *ecc;
> + int ret;
> +
> + ecc = devm_kzalloc(&pdev->dev, sizeof(*ecc), GFP_KERNEL);
> + if (!ecc) {
> + dev_err(&pdev->dev, "Can't allocate controller\n");
> + ret = -ENOMEM;
> + goto err_alloc_ecc;
you can just return here, you are using devm_ friends here
> + }
> +
> + ecc->ctlr = pdev->id;
> + ecc->dummy_slot = edma_alloc_slot(ecc->ctlr, EDMA_SLOT_ANY);
> + if (ecc->dummy_slot < 0) {
> + dev_err(&pdev->dev, "Can't allocate PaRAM dummy slot\n");
> + ret = -EIO;
> + goto err_alloc_slot;
ditto, just return!
> + }
> +
> + dma_cap_zero(ecc->dma_slave.cap_mask);
> + dma_cap_set(DMA_SLAVE, ecc->dma_slave.cap_mask);
> +
> + edma_dma_init(ecc, &ecc->dma_slave, &pdev->dev);
> +
> + edma_chan_init(ecc, &ecc->dma_slave, ecc->slave_chans);
> +
> + ret = dma_async_device_register(&ecc->dma_slave);
> + if (ret)
> + goto err_reg1;
> +
> + platform_set_drvdata(pdev, ecc);
> +
> + dev_info(&pdev->dev, "TI EDMA DMA engine driver\n");
> +
> + return 0;
> +
> +err_reg1:
> + edma_free_slot(ecc->dummy_slot);
> +err_alloc_slot:
> + devm_kfree(&pdev->dev, ecc);
> +err_alloc_ecc:
> + return ret;
> +}
> +
> +static int __devexit edma_remove(struct platform_device *pdev)
> +{
> + struct device *dev = &pdev->dev;
> + struct edma_cc *ecc = dev_get_drvdata(dev);
> +
> + dma_async_device_unregister(&ecc->dma_slave);
> + edma_free_slot(ecc->dummy_slot);
> + devm_kfree(dev, ecc);
no need to call this, it is *managed* resource
> +
> + return 0;
> +}
> +

--
~Vinod



\
 
 \ /
  Last update: 2012-08-22 06:21    [W:3.155 / U:0.572 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site