lkml.org 
[lkml]   [2012]   [Aug]   [2]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    /
    Date
    From
    SubjectRe: [PATCH 2/3] ARM: OMAP: hwmod: revise deassert sequence
    Hello OMar,

    On Mon, 16 Jul 2012, Omar Ramirez Luna wrote:

    > For a reset sequence to complete cleanly, a module needs its
    > associated clocks to be enabled, otherwise the timeout check
    > in prcm code can print a false failure (failed to hardreset)
    > that occurs because the clocks aren't powered ON and the status
    > bit checked can't transition without them.
    >
    > Signed-off-by: Omar Ramirez Luna <omar.luna@linaro.org>

    Is enabling the clocks sufficient? Or do we also need to enable the
    IP block, e.g. by calling

    if (soc_ops.enable_module)
    soc_ops.enable_module(oh);

    as we do on OMAP4+ in _enable() ?


    - Paul


    \
     
     \ /
      Last update: 2012-08-02 10:41    [W:0.026 / U:92.512 seconds]
    ©2003-2016 Jasper Spaans. hosted at Digital OceanAdvertise on this site