lkml.org 
[lkml]   [2012]   [Aug]   [19]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: printks messed up in 3.6-rc2+git
On 2012.08.19 at 10:30 +0300, Meelis Roos wrote:
> 1. Lots of broken HPET messages scattered in PCI prontks like this:
> pcieport 0000:00:0c.0: Force enabled HPET at 0x%lx
> irq 40 for MSI/MSI-X
> pcieport 0000:00:0d.0: Force enabled HPET at 0x%lx
> irq 41 for MSI/MSI-X
> pcieport 0000:00:0e.0: Force enabled HPET at 0x%lx
> irq 42 for MSI/MSI-X
> pcieport 0000:00:0f.0: Force enabled HPET at 0x%lx
> irq 43 for MSI/MSI-X
>
> 2. Lots of \0x10 in different printk lines, like this:
>
> pci 0000:00:05.0: \x010Enabling HT MSI Mapping
> pci 0000:00:05.1: \x010Enabling HT MSI Mapping
> pci 0000:00:05.2: \x010Enabling HT MSI Mapping
> pci 0000:00:06.0: \x010Enabling HT MSI Mapping
> pci 0000:00:06.1: \x010Enabling HT MSI Mapping
> pci 0000:00:08.0: \x010Enabling HT MSI Mapping
> pci 0000:00:09.0: \x010Enabling HT MSI Mapping
> pci 0000:00:0c.0: \x010Enabling HT MSI Mapping
> pci 0000:00:0d.0: \x010Enabling HT MSI Mapping
> pci 0000:00:0e.0: \x010Enabling HT MSI Mapping
> pci 0000:00:0f.0: \x010Enabling HT MSI Mapping
> and this:
> usb 2-8: \x010new low-speed USB device number 5 using ohci_hcd
> usb 2-8: \x010New USB device found, idVendor=0592, idProduct=0002
> usb 2-8: \x010New USB device strings: Mfr=1, Product=2, SerialNumber=0
> usb 2-8: %s: Can't disable non-U1 or U2 state.
>
> 3. Many more %s and runtogether lines:
>
> sata_nv 0000:00:05.1: %s: ino %lu, used %d with only %d reserved data blocksUsing SWNCQ mode

Yes.
Fix is already queued up:
http://git.kernel.org/?p=linux/kernel/git/gregkh/driver-core.git;a=commitdiff;h=ebdc82899ec5ed35af1c79ed6a4eeda69dad9b90

--
Markus


\
 
 \ /
  Last update: 2012-08-19 12:41    [W:0.031 / U:0.052 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site