lkml.org 
[lkml]   [2012]   [Jul]   [5]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    /
    Date
    From
    SubjectRe: Logitech HD Webcam C525 does not work when connected to USB 2 port, works on USB 3
    On Thu, 5 Jul 2012, Frederik Himpe wrote:

    > OK, new attempt.
    >
    > I plug in webcam:
    >
    > Jul 5 21:19:02 piranha kernel: [ 9611.555849] usb 1-1.2: new high-speed USB device number 5 using ehci_hcd
    > Jul 5 21:19:03 piranha kernel: [ 9611.913815] usb 1-1.2: New USB device found, idVendor=046d, idProduct=0826
    > Jul 5 21:19:03 piranha kernel: [ 9611.913827] usb 1-1.2: New USB device strings: Mfr=0, Product=2, SerialNumber=1
    > Jul 5 21:19:03 piranha kernel: [ 9611.913832] usb 1-1.2: Product: HD Webcam C525
    > Jul 5 21:19:03 piranha kernel: [ 9611.913835] usb 1-1.2: SerialNumber: 1E83E9D0
    > Jul 5 21:19:03 piranha kernel: [ 9612.180813] uvcvideo: Found UVC 1.00 device HD Webcam C525 (046d:0826)
    > Jul 5 21:19:03 piranha kernel: [ 9612.193342] input: HD Webcam C525 as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.2/input/input27
    >
    > I run:
    > # cat /sys/bus/usb/devices/1-1.2/power/control
    > auto
    > # echo on > /sys/bus/usb/devices/1-1.2/power/control
    >
    > At this moment, the device disconnects and reconnects, according to the
    > logs:
    > Jul 5 21:20:40 piranha kernel: [ 9709.169304] usb 1-1.2: USB disconnect, device number 5
    > Jul 5 21:20:40 piranha kernel: [ 9709.416109] usb 1-1.2: new high-speed USB device number 6 using ehci_hcd
    > Jul 5 21:20:41 piranha kernel: [ 9709.774203] usb 1-1.2: New USB device found, idVendor=046d, idProduct=0826
    > Jul 5 21:20:41 piranha kernel: [ 9709.774215] usb 1-1.2: New USB device strings: Mfr=0, Product=2, SerialNumber=1
    > Jul 5 21:20:41 piranha kernel: [ 9709.774219] usb 1-1.2: Product: HD Webcam C525
    > Jul 5 21:20:41 piranha kernel: [ 9709.774222] usb 1-1.2: SerialNumber: 1E83E9D0
    > Jul 5 21:20:41 piranha kernel: [ 9710.040969] uvcvideo: Found UVC 1.00 device HD Webcam C525 (046d:0826)
    > Jul 5 21:20:41 piranha kernel: [ 9710.053472] input: HD Webcam C525 as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.2/input/input28
    >
    > And it's back to auto:
    > # cat /sys/bus/usb/devices/1-1.2/power/control
    > auto

    :-) That's pretty funny -- although you may not think so.

    > I tried setting to on again, and then this appears in the logs:
    > Jul 5 21:21:59 piranha kernel: [ 9788.223118] usb 1-1.2: USB disconnect, device number 6
    > Jul 5 21:22:00 piranha kernel: [ 9788.330415] usb 1-1.2: new full-speed USB device number 7 using ehci_hcd
    > Jul 5 21:22:00 piranha kernel: [ 9788.402207] usb 1-1.2: device descriptor read/64, error -32
    > Jul 5 21:22:00 piranha kernel: [ 9788.577706] usb 1-1.2: device descriptor read/64, error -32
    > Jul 5 21:22:00 piranha kernel: [ 9788.753203] usb 1-1.2: new full-speed USB device number 8 using ehci_hcd
    > Jul 5 21:22:00 piranha kernel: [ 9788.824996] usb 1-1.2: device descriptor read/64, error -32
    > Jul 5 21:22:00 piranha kernel: [ 9789.000493] usb 1-1.2: device descriptor read/64, error -32
    > Jul 5 21:22:00 piranha kernel: [ 9789.175991] usb 1-1.2: new full-speed USB device number 9 using ehci_hcd
    > Jul 5 21:22:01 piranha kernel: [ 9789.582701] usb 1-1.2: device not accepting address 9, error -32
    > Jul 5 21:22:01 piranha kernel: [ 9789.654621] usb 1-1.2: new full-speed USB device number 10 using ehci_hcd
    > Jul 5 21:22:01 piranha kernel: [ 9790.061329] usb 1-1.2: device not accepting address 10, error -32
    > Jul 5 21:22:01 piranha kernel: [ 9790.061467] hub 1-1:1.0: unable to enumerate USB device on port 2

    All right, what you need to do is prevent autosuspend from getting
    enabled in the first place.

    For testing purposes, the easiest way to do this is

    echo -1 >/sys/module/usbcore/parameters/autosuspend

    before plugging in the webcam. The -1 will then be used as the default
    autosuspend delay for all new USB devices, and since it is negative,
    autosuspend will be disabled.

    In the long run, it may be necessary to add a quirk entry to always
    use a reset-resume with this device. You can find similar entries in
    drivers/usb/core/quirks.c for other Logitech webcams, which makes it
    seem very likely that one is needed for yours. If you want you
    can try adding the appropriate entry and submit it as a patch.

    None of this explains why there isn't any problem when the webcam is
    plugged into a USB-3 port, unfortunately.

    Alan Stern



    \
     
     \ /
      Last update: 2012-07-05 23:41    [W:3.930 / U:0.084 seconds]
    ©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site