lkml.org 
[lkml]   [2012]   [Jul]   [5]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v4 4/4] [SCSI] sd: change to auto suspend mode
Date
Uses block layer runtime pm helper functions in scsi_runtime_suspend/resume.
Remove scsi_autopm_* from sd open/release path.

Signed-off-by: Lin Ming <ming.m.lin@intel.com>
---

v4:
- Update queue pm status in scsi_bus_resume_common

drivers/scsi/scsi_pm.c | 32 +++++++++++++++++++++++++-------
drivers/scsi/scsi_sysfs.c | 2 ++
drivers/scsi/sd.c | 7 -------
3 files changed, 27 insertions(+), 14 deletions(-)

diff --git a/drivers/scsi/scsi_pm.c b/drivers/scsi/scsi_pm.c
index d2a80de..aa43fa2 100644
--- a/drivers/scsi/scsi_pm.c
+++ b/drivers/scsi/scsi_pm.c
@@ -77,6 +77,9 @@ static int scsi_bus_resume_common(struct device *dev)
int err = 0;

if (scsi_is_sdev_device(dev)) {
+ struct scsi_device *sdev = to_scsi_device(dev);
+ struct request_queue *q = sdev->request_queue;
+
/*
* Parent device may have runtime suspended as soon as
* it is woken up during the system resume.
@@ -84,12 +87,14 @@ static int scsi_bus_resume_common(struct device *dev)
* Resume it on behalf of child.
*/
pm_runtime_get_sync(dev->parent);
+ blk_pre_runtime_resume(q);
err = scsi_dev_type_resume(dev);
if (err == 0) {
pm_runtime_disable(dev);
pm_runtime_set_active(dev);
pm_runtime_enable(dev);
}
+ blk_post_runtime_resume(q, err);
pm_runtime_put_sync(dev->parent);
}

@@ -142,10 +147,16 @@ static int scsi_runtime_suspend(struct device *dev)

dev_dbg(dev, "scsi_runtime_suspend\n");
if (scsi_is_sdev_device(dev)) {
+ struct scsi_device *sdev = to_scsi_device(dev);
+ struct request_queue *q = sdev->request_queue;
+
+ err = blk_pre_runtime_suspend(q);
+ if (err)
+ return err;
+
err = scsi_dev_type_suspend(dev, PMSG_AUTO_SUSPEND);
- if (err == -EAGAIN)
- pm_schedule_suspend(dev, jiffies_to_msecs(
- round_jiffies_up_relative(HZ/10)));
+
+ blk_post_runtime_suspend(q, err);
}

/* Insert hooks here for targets, hosts, and transport classes */
@@ -158,8 +169,14 @@ static int scsi_runtime_resume(struct device *dev)
int err = 0;

dev_dbg(dev, "scsi_runtime_resume\n");
- if (scsi_is_sdev_device(dev))
+ if (scsi_is_sdev_device(dev)) {
+ struct scsi_device *sdev = to_scsi_device(dev);
+ struct request_queue *q = sdev->request_queue;
+
+ blk_pre_runtime_resume(q);
err = scsi_dev_type_resume(dev);
+ blk_post_runtime_resume(q, err);
+ }

/* Insert hooks here for targets, hosts, and transport classes */

@@ -174,9 +191,10 @@ static int scsi_runtime_idle(struct device *dev)

/* Insert hooks here for targets, hosts, and transport classes */

- if (scsi_is_sdev_device(dev))
- err = pm_schedule_suspend(dev, 100);
- else
+ if (scsi_is_sdev_device(dev)) {
+ pm_runtime_mark_last_busy(dev);
+ err = pm_runtime_autosuspend(dev);
+ } else
err = pm_runtime_suspend(dev);
return err;
}
diff --git a/drivers/scsi/scsi_sysfs.c b/drivers/scsi/scsi_sysfs.c
index 04c2a27..1e8975f 100644
--- a/drivers/scsi/scsi_sysfs.c
+++ b/drivers/scsi/scsi_sysfs.c
@@ -895,6 +895,8 @@ int scsi_sysfs_add_sdev(struct scsi_device *sdev)
*/
scsi_autopm_get_device(sdev);

+ blk_pm_runtime_init(rq, &sdev->sdev_gendev);
+
error = device_add(&sdev->sdev_gendev);
if (error) {
sdev_printk(KERN_INFO, sdev,
diff --git a/drivers/scsi/sd.c b/drivers/scsi/sd.c
index bf8413a..bf9f4e8 100644
--- a/drivers/scsi/sd.c
+++ b/drivers/scsi/sd.c
@@ -967,10 +967,6 @@ static int sd_open(struct block_device *bdev, fmode_t mode)

sdev = sdkp->device;

- retval = scsi_autopm_get_device(sdev);
- if (retval)
- goto error_autopm;
-
/*
* If the device is in error recovery, wait until it is done.
* If the device is offline, then disallow any access to it.
@@ -1015,8 +1011,6 @@ static int sd_open(struct block_device *bdev, fmode_t mode)
return 0;

error_out:
- scsi_autopm_put_device(sdev);
-error_autopm:
scsi_disk_put(sdkp);
return retval;
}
@@ -1051,7 +1045,6 @@ static int sd_release(struct gendisk *disk, fmode_t mode)
* XXX is followed by a "rmmod sd_mod"?
*/

- scsi_autopm_put_device(sdev);
scsi_disk_put(sdkp);
return 0;
}
--
1.7.10


\
 
 \ /
  Last update: 2012-07-05 10:21    [W:0.117 / U:0.128 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site