lkml.org 
[lkml]   [2012]   [Jul]   [4]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
Subjectethernet-related thermal emergency on Thinkpad x60
Hi!

When using nework interface (eth0), machine starts to behave
weird. Like... complete freeze, then poweroff, then it hangs on boot
(initializing ACPI) until I let it to cool down... and I'm not even
using gigabit speed.

Did anyone see it? Any ideas? Should I attempt to open it and clean
the dust?

Pavel

e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: Rx/Tx
e1000e 0000:02:00.0: eth0: 10/100 speed: disabling TSO
coda_read_super: Bad mount data
coda_read_super: device index: 0
coda_read_super: rootfid is (01234567.ffffffff.08051c00.00000000)
coda: Unexpected interruption.
Failure of coda_cnode_make for root: error -4
thinkpad_acpi: THERMAL EMERGENCY: a sensor reports something is extremely hot!
thinkpad_acpi: temperatures (Celsius): 88 49 N/A 82 40 N/A 40 N/A 52 61 N/A N/A N/A N/A N/A N/A


--
(english) http://www.livejournal.com/~pavelmachek
(cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html


\
 
 \ /
  Last update: 2012-07-04 16:41    [W:0.060 / U:0.436 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site