lkml.org 
[lkml]   [2012]   [Jul]   [4]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [RFC PATCH -tip ] tracing: make a snapshot feature available from userspace.
Hello, Steven,

I've sent below RFC patch, but still have no responses. This patch can
be applied to current tip tree.

If you have time, could you give any comment about this patch?

Best regards,
Hiraku Toyooka


(2012/06/05 21:06), Hiraku Toyooka wrote:
> Hello,
>
> This patch provides new debugfs interfaces for taking a snapshot
> in ftrace.
>
> Ftrace is available as a flight recorder. When a kernel panic
> occurs, we can get trace data from the dumped kernel image.
>
> But in case of some systems, non-critical errors (such as
> application's errors) are difficult to handle because of following
> reasons.
>
> - When the system has to continue to run, it can't stop tracing.
> - Even then, failure analysis is necessary to prevent the same
> errors.
>
> So, I propose making the ftrace's snapshot feature available from
> userspace to solve above dilemma.
> (See also
> https://events.linuxfoundation.org/images/stories/pdf/lcjp2012_toyooka.pdf)
>
> This enables to preserve trace buffer at a particular point in time
> without stopping tracing. When a snapshot is taken, ftrace swaps the
> current buffer with a spare buffer which is prepared in advance. This
> means that the tracing itself continues on the spare buffer.
>
> Currently, ftrace has a snapshot feature available from kernel space
> and some tracers (e.g. irqsoff) are using it. This patch allows users
> to use the same snapshot feature via debugfs.
>
> I added two debugfs files in "tracing" directory.
>
> snapshot_enabled:
>
> This is used to set or display whether the snapshot is
> enabled. Echo 1 into this file to prepare a spare buffer
> or 0 to shrink it. So, the memory for the spare buffer
> will be consumed only when this knob is set.
>
> snapshot_pipe:
>
> This is used to take a snapshot and to read the output
> of the snapshot (max_tr). Echo 1 into this file to take a
> snapshot. Reads from this file is the same as the
> "trace_pipe" file.
>
> Here is an example of using the snapshot feature.
>
> # echo nop > current_tracer
> # echo 1 > snapshot_enabled
> # echo 1 > events/sched/enable
> [...]
> # echo 1 > snapshot_pipe
> # cat snapshot_pipe
> bash-3352 [001] dN.. 18440.883932: sched_wakeup: comm=migration/6 p
> id=28 prio=0 success=1 target_cpu=006
> bash-3352 [001] dN.. 18440.883933: sched_wakeup: comm=migration/7 p
> id=32 prio=0 success=1 target_cpu=007
> bash-3352 [001] d... 18440.883935: sched_switch: prev_comm=bash pre
> v_pid=3352 prev_prio=120 prev_state=R ==> next_comm=migration/1 next_pid=8 next_
> prio=0
> [...]
>
>
> Signed-off-by: Hiraku Toyooka <hiraku.toyooka.gu@hitachi.com>
> Cc: Steven Rostedt <rostedt@goodmis.org>
> Cc: Frederic Weisbecker <fweisbec@gmail.com>
> Cc: Ingo Molnar <mingo@redhat.com>
> Cc: Rob Landley <rob@landley.net>
> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
> Cc: linux-doc@vger.kernel.org
> Cc: linux-kernel@vger.kernel.org
> ---
>
> Documentation/trace/ftrace.txt | 47 +++++++++++
> kernel/trace/trace.c | 152 +++++++++++++++++++++++++++++++++++++
> kernel/trace/trace.h | 8 ++
> kernel/trace/trace_irqsoff.c | 3 +
> kernel/trace/trace_sched_wakeup.c | 2
> 5 files changed, 210 insertions(+), 2 deletions(-)
>
> diff --git a/Documentation/trace/ftrace.txt b/Documentation/trace/ftrace.txt
> index 6f51fed..df9fa13 100644
> --- a/Documentation/trace/ftrace.txt
> +++ b/Documentation/trace/ftrace.txt
> @@ -1842,6 +1842,53 @@ an error.
> # cat buffer_size_kb
> 85
>
> +
> +Snapshot
> +--------
> +If CONFIG_TRACER_MAX_TRACE is set, the (generic) snapshot
> +feature is available in all tracers except for the special
> +tracers which use a snapshot inside themselves(such as "irqsoff"
> +or "wakeup").
> +
> +This enables to preserve trace buffer at a particular point in
> +time without stopping tracing. When a snapshot is taken, ftrace
> +swaps the current buffer with a spare buffer which is prepared
> +in advance. This means that the tracing itself continues on the
> +spare buffer.
> +
> +Following debugfs files in "tracing" directory are related with
> +this feature.
> +
> + snapshot_enabled:
> +
> + This is used to set or display whether the snapshot is
> + enabled. Echo 1 into this file to prepare a spare buffer
> + or 0 to shrink it. So, the memory for the spare buffer
> + will be consumed only when this knob is set.
> +
> + snapshot_pipe:
> +
> + This is used to take a snapshot and to read the output
> + of the snapshot. Echo 1 into this file to take a
> + snapshot. Reads from this file is the same as the
> + "trace_pipe" file (described above "The File System"
> + section), so that both reads from the snapshot and
> + tracing are executable in parallel.
> +
> +Here is an example of using the snapshot feature.
> +
> + # echo nop > current_tracer
> + # echo 1 > snapshot_enabled
> + # echo 1 > events/sched/enable
> + [...]
> + # echo 1 > snapshot_pipe
> + # cat snapshot_pipe
> + bash-3352 [001] dN.. 18440.883932: sched_wakeup: comm=migration/6 pid=28 prio=0 success=1 target_cpu=006
> + bash-3352 [001] dN.. 18440.883933: sched_wakeup: comm=migration/7 pid=32 prio=0 success=1 target_cpu=007
> + bash-3352 [001] d... 18440.883935: sched_switch: prev_comm=bash prev_pid=3352 prev_prio=120 prev_state=R ==> next_comm=migration/1 next_pid=8 next_prio=0
> +[...]
> +
> +
> -----------
>
> More details can be found in the source code, in the
> diff --git a/kernel/trace/trace.c b/kernel/trace/trace.c
> index 68032c6..8e722c3 100644
> --- a/kernel/trace/trace.c
> +++ b/kernel/trace/trace.c
> @@ -3266,7 +3266,8 @@ tracing_max_lat_write(struct file *filp, const char __user *ubuf,
> return cnt;
> }
>
> -static int tracing_open_pipe(struct inode *inode, struct file *filp)
> +static int __tracing_open_pipe(struct inode *inode, struct file *filp,
> + struct trace_array *tr)
> {
> long cpu_file = (long) inode->i_private;
> struct trace_iterator *iter;
> @@ -3308,7 +3309,7 @@ static int tracing_open_pipe(struct inode *inode, struct file *filp)
> iter->iter_flags |= TRACE_FILE_LAT_FMT;
>
> iter->cpu_file = cpu_file;
> - iter->tr = &global_trace;
> + iter->tr = tr;
> mutex_init(&iter->mutex);
> filp->private_data = iter;
>
> @@ -3327,6 +3328,11 @@ fail:
> return ret;
> }
>
> +static int tracing_open_pipe(struct inode *inode, struct file *filp)
> +{
> + return __tracing_open_pipe(inode, filp, &global_trace);
> +}
> +
> static int tracing_release_pipe(struct inode *inode, struct file *file)
> {
> struct trace_iterator *iter = file->private_data;
> @@ -4008,6 +4014,122 @@ static int tracing_clock_open(struct inode *inode, struct file *file)
> return single_open(file, tracing_clock_show, NULL);
> }
>
> +#ifdef CONFIG_TRACER_MAX_TRACE
> +static int tracing_open_snapshot_pipe(struct inode *inode, struct file *filp)
> +{
> + return __tracing_open_pipe(inode, filp, &max_tr);
> +}
> +
> +static ssize_t
> +tracing_write_snapshot_pipe(struct file *filp, const char __user *ubuf,
> + size_t cnt, loff_t *ppos)
> +{
> + unsigned long val = 0;
> + int ret;
> +
> + ret = kstrtoul_from_user(ubuf, cnt, 10, &val);
> + if (ret)
> + return ret;
> +
> + mutex_lock(&trace_types_lock);
> +
> + /* If current tracer's use_max_tr == 0, we prevent taking a snapshot */
> + if (!current_trace->use_max_tr) {
> + ret = -EBUSY;
> + goto out;
> + }
> + if (val) {
> + unsigned long flags;
> + local_irq_save(flags);
> + update_max_tr(&global_trace, current, raw_smp_processor_id());
> + local_irq_restore(flags);
> + }
> +out:
> + mutex_unlock(&trace_types_lock);
> +
> + if (!ret) {
> + *ppos += cnt;
> + ret = cnt;
> + }
> +
> + return ret;
> +}
> +
> +static ssize_t
> +tracing_snapshot_ctrl_read(struct file *filp, char __user *ubuf,
> + size_t cnt, loff_t *ppos)
> +{
> + char buf[64];
> + int r;
> +
> + r = sprintf(buf, "%d\n", current_trace->use_max_tr);
> + return simple_read_from_buffer(ubuf, cnt, ppos, buf, r);
> +}
> +
> +static ssize_t
> +tracing_snapshot_ctrl_write(struct file *filp, const char __user *ubuf,
> + size_t cnt, loff_t *ppos)
> +{
> + unsigned long val;
> + int ret;
> +
> + ret = kstrtoul_from_user(ubuf, cnt, 10, &val);
> + if (ret)
> + return ret;
> +
> + val = !!val;
> +
> + mutex_lock(&trace_types_lock);
> + tracing_stop();
> + arch_spin_lock(&ftrace_max_lock);
> +
> + /* When always_use_max_tr == 1, we can't toggle use_max_tr. */
> + if (current_trace->always_use_max_tr) {
> + ret = -EBUSY;
> + goto out;
> + }
> +
> + if (!(current_trace->use_max_tr ^ val))
> + goto out;
> +
> + if (val) {
> + int cpu;
> + for_each_tracing_cpu(cpu) {
> + ret = ring_buffer_resize(max_tr.buffer,
> + global_trace.data[cpu]->entries,
> + cpu);
> + if (ret < 0)
> + break;
> + max_tr.data[cpu]->entries =
> + global_trace.data[cpu]->entries;
> + }
> + if (ret < 0) {
> + ring_buffer_resize(max_tr.buffer, 1,
> + RING_BUFFER_ALL_CPUS);
> + set_buffer_entries(&max_tr, 1);
> + ret = -ENOMEM;
> + goto out;
> + }
> + current_trace->use_max_tr = 1;
> + } else {
> + /* shrink buffer for saving memory */
> + ring_buffer_resize(max_tr.buffer, 1, RING_BUFFER_ALL_CPUS);
> + set_buffer_entries(&max_tr, 1);
> + current_trace->use_max_tr = 0;
> + }
> +out:
> + arch_spin_unlock(&ftrace_max_lock);
> + tracing_start();
> + mutex_unlock(&trace_types_lock);
> +
> + if (!ret) {
> + *ppos += cnt;
> + ret = cnt;
> + }
> + return ret;
> +}
> +#endif /* CONFIG_TRACER_MAX_TRACE */
> +
> static const struct file_operations tracing_max_lat_fops = {
> .open = tracing_open_generic,
> .read = tracing_max_lat_read,
> @@ -4071,6 +4193,25 @@ static const struct file_operations trace_clock_fops = {
> .write = tracing_clock_write,
> };
>
> +#ifdef CONFIG_TRACER_MAX_TRACE
> +static const struct file_operations tracing_snapshot_pipe_fops = {
> + .open = tracing_open_snapshot_pipe,
> + .poll = tracing_poll_pipe,
> + .read = tracing_read_pipe,
> + .write = tracing_write_snapshot_pipe,
> + .splice_read = tracing_splice_read_pipe,
> + .release = tracing_release_pipe,
> + .llseek = no_llseek,
> +};
> +
> +static const struct file_operations tracing_snapshot_ctrl_fops = {
> + .open = tracing_open_generic,
> + .read = tracing_snapshot_ctrl_read,
> + .write = tracing_snapshot_ctrl_write,
> + .llseek = generic_file_llseek,
> +};
> +#endif /* CONFIG_TRACER_MAX_TRACE */
> +
> struct ftrace_buffer_info {
> struct trace_array *tr;
> void *spare;
> @@ -4819,6 +4960,13 @@ static __init int tracer_init_debugfs(void)
> #ifdef CONFIG_TRACER_MAX_TRACE
> trace_create_file("tracing_max_latency", 0644, d_tracer,
> &tracing_max_latency, &tracing_max_lat_fops);
> +
> + trace_create_file("snapshot_pipe", 0644, d_tracer,
> + (void *) TRACE_PIPE_ALL_CPU,
> + &tracing_snapshot_pipe_fops);
> +
> + trace_create_file("snapshot_enabled", 0644, d_tracer,
> + NULL, &tracing_snapshot_ctrl_fops);
> #endif
>
> trace_create_file("tracing_thresh", 0644, d_tracer,
> diff --git a/kernel/trace/trace.h b/kernel/trace/trace.h
> index 5aec220..602657a 100644
> --- a/kernel/trace/trace.h
> +++ b/kernel/trace/trace.h
> @@ -254,6 +254,8 @@ struct tracer_flags {
> * @print_line: callback that prints a trace
> * @set_flag: signals one of your private flags changed (trace_options file)
> * @flags: your private flags
> + * @use_max_tr: show whether the snapshot feature is available on this tracer
> + * @always_use_max_tr: show that max_tr is always used on this tracer
> */
> struct tracer {
> const char *name;
> @@ -286,7 +288,13 @@ struct tracer {
> struct tracer *next;
> struct tracer_flags *flags;
> int print_max;
> + /* Dynamically toggled via "snapshot_enabled" debugfs file */
> int use_max_tr;
> + /*
> + * If this value is 1, this tracer always uses max_tr and "use_max_tr"
> + * can't be toggled.
> + */
> + int always_use_max_tr;
> };
>
>
> diff --git a/kernel/trace/trace_irqsoff.c b/kernel/trace/trace_irqsoff.c
> index 99d20e9..37cdb75 100644
> --- a/kernel/trace/trace_irqsoff.c
> +++ b/kernel/trace/trace_irqsoff.c
> @@ -614,6 +614,7 @@ static struct tracer irqsoff_tracer __read_mostly =
> .open = irqsoff_trace_open,
> .close = irqsoff_trace_close,
> .use_max_tr = 1,
> + .always_use_max_tr = 1,
> };
> # define register_irqsoff(trace) register_tracer(&trace)
> #else
> @@ -647,6 +648,7 @@ static struct tracer preemptoff_tracer __read_mostly =
> .open = irqsoff_trace_open,
> .close = irqsoff_trace_close,
> .use_max_tr = 1,
> + .always_use_max_tr = 1,
> };
> # define register_preemptoff(trace) register_tracer(&trace)
> #else
> @@ -682,6 +684,7 @@ static struct tracer preemptirqsoff_tracer __read_mostly =
> .open = irqsoff_trace_open,
> .close = irqsoff_trace_close,
> .use_max_tr = 1,
> + .always_use_max_tr = 1,
> };
>
> # define register_preemptirqsoff(trace) register_tracer(&trace)
> diff --git a/kernel/trace/trace_sched_wakeup.c b/kernel/trace/trace_sched_wakeup.c
> index ff791ea..b6e91a0 100644
> --- a/kernel/trace/trace_sched_wakeup.c
> +++ b/kernel/trace/trace_sched_wakeup.c
> @@ -599,6 +599,7 @@ static struct tracer wakeup_tracer __read_mostly =
> .open = wakeup_trace_open,
> .close = wakeup_trace_close,
> .use_max_tr = 1,
> + .always_use_max_tr = 1,
> };
>
> static struct tracer wakeup_rt_tracer __read_mostly =
> @@ -620,6 +621,7 @@ static struct tracer wakeup_rt_tracer __read_mostly =
> .open = wakeup_trace_open,
> .close = wakeup_trace_close,
> .use_max_tr = 1,
> + .always_use_max_tr = 1,
> };
>
> __init static int init_wakeup_tracer(void)
>



\
 
 \ /
  Last update: 2012-07-04 13:41    [W:0.108 / U:0.708 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site