lkml.org 
[lkml]   [2012]   [Jul]   [31]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH] usb: host: xhci: Fix Compliance Mode on SN65LVPE502CP Hardware
On Tue, Jul 31, 2012 at 04:19:48PM -0500, Alexis Cortes wrote:

That's some "From:" line in your patch, are you sure that is right?

> This patch is intended to work around a known issue on the
> SN65LVPE502CP USB3.0 re-driver that can delay the negotiation
> between a device and the host past the usual handshake timeout,
> and if that happens on the first insertion, the host controller
> port will enter in Compliance Mode as per xHCI Spec. The patch
> creates a timer which polls every 2 seconds the link state of each
> host controller's port (this by reading the PORTSC register) and
> recovers the port by issuing a Warm reset every time Compliance mode
> is detected.
>
> Signed-off-by: Alexis R. Cortes <alexis.cortes@ti.com>

Odds are you want this address there, right? If so, please put it in
the first line of the patch comments, as described in the
Documentation/SubmittingPatches file.

> ---
> drivers/usb/host/xhci-hub.c | 27 ++++++++++++++
> drivers/usb/host/xhci.c | 81
> +++++++++++++++++++++++++++++++++++++++++++

Your patch is linewrapped and can not be applied :(

Care to try again?

greg k-h


\
 
 \ /
  Last update: 2012-08-01 00:21    [W:0.050 / U:0.292 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site