lkml.org 
[lkml]   [2012]   [Jul]   [3]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH 2/2 v2] HID: magicmouse: Implement Multi-touch Protocol B (MT-B)
Hi Yufeng,

> The driver for Apple Magic Trackpad/Mouse currently uses
> Multi-touch Protocol A (MT-A) to report touch events and uses
> ABS_MT_TRACKING_ID to do finger tracking. The fact of the device
> being able to track individual finger makes it possible to
> report touch events using MT-B. This patch converts the driver
> to use MT-B as it is preferred to MT-A.
>
> V2: Converting entirely to MT-B as Henrik Rydberg suggested.
>
> Signed-off-by: Yufeng Shen <miletus@chromium.org>
> ---
> drivers/hid/hid-magicmouse.c | 26 +++++++++++++++++++-------
> 1 files changed, 19 insertions(+), 7 deletions(-)
>
> diff --git a/drivers/hid/hid-magicmouse.c b/drivers/hid/hid-magicmouse.c
> index fd88f21..0d6957e 100644
> --- a/drivers/hid/hid-magicmouse.c
> +++ b/drivers/hid/hid-magicmouse.c
> @@ -16,6 +16,7 @@
>
> #include <linux/device.h>
> #include <linux/hid.h>
> +#include <linux/input/mt.h>
> #include <linux/module.h>
> #include <linux/slab.h>
> #include <linux/usb.h>
> @@ -271,9 +272,11 @@ static void magicmouse_emit_touch(struct magicmouse_sc *msc, int raw_id, u8 *tda
> } else if (msc->single_touch_id == id)
> msc->single_touch_id = SINGLE_TOUCH_UP;
>
> + input_mt_slot(input, id);
> + input_mt_report_slot_state(input, MT_TOOL_FINGER, down);
> +
> /* Generate the input events for this touch. */
> if (down) {
> - input_report_abs(input, ABS_MT_TRACKING_ID, id);
> input_report_abs(input, ABS_MT_TOUCH_MAJOR, touch_major << 2);
> input_report_abs(input, ABS_MT_TOUCH_MINOR, touch_minor << 2);
> input_report_abs(input, ABS_MT_ORIENTATION, -orientation);
> @@ -286,8 +289,6 @@ static void magicmouse_emit_touch(struct magicmouse_sc *msc, int raw_id, u8 *tda
> else /* USB_DEVICE_ID_APPLE_MAGICTRACKPAD */
> input_event(input, EV_MSC, MSC_RAW, tdata[8]);
> }
> -
> - input_mt_sync(input);
> }
> }
>
> @@ -383,8 +384,10 @@ static int magicmouse_raw_event(struct hid_device *hdev,
> return 1;
> }
>
> -static void magicmouse_setup_input(struct input_dev *input, struct hid_device *hdev)
> +static int magicmouse_setup_input(struct input_dev *input, struct hid_device *hdev)
> {
> + int error;
> +
> __set_bit(EV_KEY, input->evbit);
>
> if (input->id.product == USB_DEVICE_ID_APPLE_MAGICMOUSE) {
> @@ -421,7 +424,9 @@ static void magicmouse_setup_input(struct input_dev *input, struct hid_device *h
>
> __set_bit(EV_ABS, input->evbit);
>
> - input_set_abs_params(input, ABS_MT_TRACKING_ID, 0, 15, 0, 0);
> + error = input_mt_init_slots(input, 16);
> + if (error)
> + return error;
> input_set_abs_params(input, ABS_MT_TOUCH_MAJOR, 0, 255 << 2,
> 4, 0);
> input_set_abs_params(input, ABS_MT_TOUCH_MINOR, 0, 255 << 2,
> @@ -468,6 +473,8 @@ static void magicmouse_setup_input(struct input_dev *input, struct hid_device *h
> __set_bit(EV_MSC, input->evbit);
> __set_bit(MSC_RAW, input->mscbit);
> }
> +
> + return 0;
> }
>
> static int magicmouse_input_mapping(struct hid_device *hdev,
> @@ -523,8 +530,13 @@ static int magicmouse_probe(struct hid_device *hdev,
> /* We do this after hid-input is done parsing reports so that
> * hid-input uses the most natural button and axis IDs.
> */
> - if (msc->input)
> - magicmouse_setup_input(msc->input, hdev);
> + if (msc->input) {
> + ret = magicmouse_setup_input(msc->input, hdev);
> + if (ret) {
> + hid_err(hdev, "magicmouse setup input failed\n");

Error codes are usually meaningful, so printing it here is a good idea.

> + goto err_stop_hw;
> + }
> + }
>
> if (id->product == USB_DEVICE_ID_APPLE_MAGICMOUSE)
> report = hid_register_report(hdev, HID_INPUT_REPORT,
> --
> 1.7.7.3
>

In addition to the above, which looks correct thank you, please
replace the explicit BTN_TOOL events and the single_touch_id logic
with input_mt_report_pointer_emulation(input, true).

Thanks,
Henrik


\
 
 \ /
  Last update: 2012-07-03 22:21    [W:0.037 / U:0.056 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site