lkml.org 
[lkml]   [2012]   [Jul]   [26]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 4/4] X86: Use PCI setup data
Date
EFI can provide PCI ROMs out of band via boot services, which may not be
available after boot. Add support for using the data handed off to us by
the boot stub or bootloader.

Signed-off-by: Matthew Garrett <mjg@redhat.com>
---
arch/x86/pci/common.c | 33 +++++++++++++++++++++++++++++++++
1 file changed, 33 insertions(+)
diff --git a/arch/x86/pci/common.c b/arch/x86/pci/common.c
index 720e973f..3d2752f 100644
--- a/arch/x86/pci/common.c
+++ b/arch/x86/pci/common.c
@@ -17,6 +17,7 @@
#include <asm/io.h>
#include <asm/smp.h>
#include <asm/pci_x86.h>
+#include <asm/setup.h>

unsigned int pci_probe = PCI_PROBE_BIOS | PCI_PROBE_CONF1 | PCI_PROBE_CONF2 |
PCI_PROBE_MMCONF;
@@ -608,6 +609,38 @@ unsigned int pcibios_assign_all_busses(void)
return (pci_probe & PCI_ASSIGN_ALL_BUSSES) ? 1 : 0;
}

+int pcibios_add_device(struct pci_dev *dev)
+{
+ struct setup_data *data;
+ struct pci_setup_rom *rom;
+ u64 pa_data;
+
+ if (boot_params.hdr.version < 0x0209)
+ return 0;
+
+ pa_data = boot_params.hdr.setup_data;
+ while (pa_data) {
+ data = phys_to_virt(pa_data);
+
+ if (data->type == SETUP_PCI) {
+ rom = (struct pci_setup_rom *)data;
+
+ if ((pci_domain_nr(dev->bus) == rom->segment) &&
+ (dev->bus->number == rom->bus) &&
+ (PCI_SLOT(dev->devfn) == rom->device) &&
+ (PCI_FUNC(dev->devfn) == rom->function) &&
+ (dev->vendor == rom->vendor) &&
+ (dev->device == rom->devid)) {
+ dev->rom = (void *)(pa_data +
+ offsetof(struct pci_setup_rom, romdata));
+ dev->romlen = rom->pcilen;
+ }
+ }
+ pa_data = data->next;
+ }
+ return 0;
+}
+
int pcibios_enable_device(struct pci_dev *dev, int mask)
{
int err;
--
1.7.10.4


\
 
 \ /
  Last update: 2012-07-27 00:41    [from the cache]
©2003-2014 Jasper Spaans. Advertise on this site