lkml.org 
[lkml]   [2012]   [Jul]   [25]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    /
    Date
    From
    SubjectRe: drm/nouveau: crash regression in 3.5
    > Does it work if you boot without X and modprobe nouveau manually? If it does,
    > can you disable page flipping in xorg.conf (Option "PageFlip" "0" in nouveau
    > device section) and recheck with X?

    It happens long before X, when the nouveau module is loaded.

    > Does it work if you disable acceleration (nouveau.noaccel=1 in kernel command
    > line)?

    nouveau.noaccel=1 is already on my cmdline as running X with accel
    enabled never worked anyway.

    > Is there anything saved in /var/log/ from previous boot? Can you ssh
    > into and check dmesg? Can you use netconsole and catch full log?

    Thanks for the netconsole tip. I have attached the log.

    I am not an expert but it looks like a crash in the inlined
    nouveau_software_vblank(). Is the vblank.list already initialized at
    this point?

    Thanks,

    Ortwin
    Initializing cgroup subsys cpu
    Linux version 3.5.0 (root@ortwin-hp) (gcc version 4.5.3 (Gentoo 4.5.3-r2 p1.1, pie-0.4.7) ) #2 SMP PREEMPT Wed Jul 25 09:39:45 CEST 2012
    Command line: root=/dev/sda5 rootfstype=ext4 pciehp_force=1 nouveau.modeset=1 nouveau.noaccel=1 netconsole=4444@10.11.1.234/eth0,4444@10.11.1.19/00:1a:64:89:71:b8
    e820: BIOS-provided physical RAM map:
    BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
    BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
    BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
    BIOS-e820: [mem 0x0000000000100000-0x00000000befc1fff] usable
    BIOS-e820: [mem 0x00000000befc2000-0x00000000bf6c1fff] reserved
    BIOS-e820: [mem 0x00000000bf6c2000-0x00000000bf7c1fff] ACPI NVS
    BIOS-e820: [mem 0x00000000bf7c2000-0x00000000bf7fefff] ACPI data
    BIOS-e820: [mem 0x00000000bf7ff000-0x00000000bf7fffff] usable
    BIOS-e820: [mem 0x00000000bf800000-0x00000000bfffffff] reserved
    BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
    BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
    BIOS-e820: [mem 0x00000000fed10000-0x00000000fed13fff] reserved
    BIOS-e820: [mem 0x00000000fed19000-0x00000000fed19fff] reserved
    BIOS-e820: [mem 0x00000000fed1b000-0x00000000fed1ffff] reserved
    BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
    BIOS-e820: [mem 0x00000000ffd00000-0x00000000ffffffff] reserved
    BIOS-e820: [mem 0x0000000100000000-0x00000001fbffffff] usable
    BIOS-e820: [mem 0x00000001fc000000-0x00000001ffffffff] reserved
    BIOS-e820: [mem 0x0000000200000000-0x000000023bffffff] usable
    NX (Execute Disable) protection: active
    DMI 2.6 present.
    No AGP bridge found
    e820: last_pfn = 0x23c000 max_arch_pfn = 0x400000000
    x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
    e820: last_pfn = 0xbf800 max_arch_pfn = 0x400000000
    init_memory_mapping: [mem 0x00000000-0xbf7fffff]
    init_memory_mapping: [mem 0x100000000-0x23bffffff]
    ACPI: RSDP 00000000000fddc0 00024 (v02 HPQOEM)
    ACPI: XSDT 00000000bf7fe120 00094 (v01 HPQOEM SLIC-MPC 0000000F 01000013)
    ACPI: FACP 00000000bf7fc000 000F4 (v03 HPQOEM 1521 0000000F HP 00000001)
    ACPI: DSDT 00000000bf7da000 1C77F (v02 HPQOEM 1521 00000001 INTL 20060912)
    ACPI: FACS 00000000bf760000 00040
    ACPI: HPET 00000000bf7fb000 00038 (v01 HPQOEM 1521 00000001 HP 00000001)
    ACPI: APIC 00000000bf7fa000 000BC (v01 HPQOEM 1521 00000001 HP 00000001)
    ACPI: MCFG 00000000bf7f9000 0003C (v01 HPQOEM 1521 00000001 HP 00000001)
    ACPI: TCPA 00000000bf7f7000 00032 (v02 HPQOEM 1521 00000000 HP 00000001)
    ACPI: SSDT 00000000bf7d7000 00135 (v01 HPQOEM SataAhci 00001000 INTL 20060912)
    ACPI: SSDT 00000000bf7d6000 00314 (v01 HPQOEM PtidDevc 00001000 INTL 20060912)
    ACPI: SLIC 00000000bf7d5000 00176 (v01 HPQOEM SLIC-MPC 00000001 HP 00000001)
    ACPI: SSDT 00000000bf7d1000 02576 (v01 HPQOEM NVIDIAGF 00000001 INTL 20060912)
    ACPI: DMAR 00000000bf7d0000 00080 (v01 INTEL CP_DALE 00000001 INTL 00000001)
    ACPI: SSDT 00000000bf7cf000 00A10 (v01 PmRef CpuPm 00003000 INTL 20060912)
    ACPI: SSDT 00000000bf7ce000 00288 (v01 PmRef Cpu0Tst 00003000 INTL 20060912)
    ACPI: SSDT 00000000bf7cd000 00225 (v01 PmRef ApTst 00003000 INTL 20060912)
    ACPI: ASF! 00000000bf7f8000 000A0 (v32 HPQOEM 1521 00000001 HP 00000001)
    Zone ranges:
    DMA [mem 0x00010000-0x00ffffff]
    DMA32 [mem 0x01000000-0xffffffff]
    Normal [mem 0x100000000-0x23bffffff]
    Movable zone start for each node
    Early memory node ranges
    node 0: [mem 0x00010000-0x0009efff]
    node 0: [mem 0x00100000-0xbefc1fff]
    node 0: [mem 0xbf7ff000-0xbf7fffff]
    node 0: [mem 0x100000000-0x1fbffffff]
    node 0: [mem 0x200000000-0x23bffffff]
    ACPI: PM-Timer IO Port: 0x408
    ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
    ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
    ACPI: LAPIC (acpi_id[0x02] lapic_id[0x04] enabled)
    ACPI: LAPIC (acpi_id[0x03] lapic_id[0x05] enabled)
    ACPI: LAPIC (acpi_id[0x04] lapic_id[0x00] disabled)
    ACPI: LAPIC (acpi_id[0x05] lapic_id[0x00] disabled)
    ACPI: LAPIC (acpi_id[0x06] lapic_id[0x00] disabled)
    ACPI: LAPIC (acpi_id[0x07] lapic_id[0x00] disabled)
    ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
    ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
    ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
    ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
    ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
    ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
    ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
    ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
    ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
    IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
    ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
    ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
    Using ACPI (MADT) for SMP configuration information
    ACPI: HPET id: 0x8086a201 base: 0xfed00000
    SMP: Allowing 8 CPUs, 4 hotplug CPUs
    e820: [mem 0xc0000000-0xdfffffff] available for PCI devices
    setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1
    PERCPU: Embedded 27 pages/cpu @ffff88023bc00000 s78080 r8192 d24320 u262144
    Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2023500
    Kernel command line: root=/dev/sda5 rootfstype=ext4 pciehp_force=1 nouveau.modeset=1 nouveau.noaccel=1 netconsole=4444@10.11.1.234/eth0,4444@10.11.1.19/00:1a:64:89:71:b8
    PID hash table entries: 4096 (order: 3, 32768 bytes)
    Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
    Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
    __ex_table already sorted, skipping sort
    Checking aperture...
    No AGP bridge found
    Memory: 8015340k/9371648k available (7704k kernel code, 1131192k absent, 225116k reserved, 5399k data, 540k init)
    SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
    Preemptible hierarchical RCU implementation.
    NR_IRQS:4352 nr_irqs:744 16
    Extended CMOS year: 2000
    Console: colour VGA+ 80x25
    console [tty0] enabled
    Fast TSC calibration failed
    TSC: PIT calibration matches HPET. 1 loops
    Detected 2660.535 MHz processor.
    Calibrating delay loop (skipped), value calculated using timer frequency.. 5321.07 BogoMIPS (lpj=10642140)
    pid_max: default: 32768 minimum: 301
    Mount-cache hash table entries: 256
    Initializing cgroup subsys blkio
    CPU: Physical Processor ID: 0
    CPU: Processor Core ID: 0
    mce: CPU supports 9 MCE banks
    CPU0: Thermal monitoring enabled (TM1)
    using mwait in idle threads.
    ACPI: Core revision 20120320
    ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
    CPU0: Intel(R) Core(TM) i7 CPU M 620 @ 2.67GHz stepping 05
    Performance Events: PEBS fmt1+, 16-deep LBR, Westmere events, Intel PMU driver.
    CPUID marked event: 'bus cycles' unavailable
    ... version: 3
    ... bit width: 48
    ... generic registers: 4
    ... value mask: 0000ffffffffffff
    ... max period: 000000007fffffff
    ... fixed-purpose events: 3
    ... event mask: 000000070000000f
    Booting Node 0, Processors #1 #2 #3
    Brought up 4 CPUs
    Total of 4 processors activated (21284.28 BogoMIPS).
    devtmpfs: initialized
    PM: Registering ACPI NVS region [mem 0xbf6c2000-0xbf7c1fff] (1048576 bytes)
    NET: Registered protocol family 16
    ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
    ACPI: bus type pci registered
    dca service started, version 1.12.1
    PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
    PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
    PCI: Using configuration type 1 for base access
    bio: create slab <bio-0> at 0
    ACPI: Added _OSI(Module Device)
    ACPI: Added _OSI(Processor Device)
    ACPI: Added _OSI(3.0 _SCP Extensions)
    ACPI: Added _OSI(Processor Aggregator Device)
    [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
    ACPI: SSDT 00000000bf6bba18 0047D (v01 PmRef Cpu0Ist 00003000 INTL 20060912)
    ACPI: Dynamic OEM Table Load:
    ACPI: SSDT (null) 0047D (v01 PmRef Cpu0Ist 00003000 INTL 20060912)
    ACPI: SSDT 00000000bf6b9018 008AA (v01 PmRef Cpu0Cst 00003001 INTL 20060912)
    ACPI: Dynamic OEM Table Load:
    ACPI: SSDT (null) 008AA (v01 PmRef Cpu0Cst 00003001 INTL 20060912)
    ACPI: SSDT 00000000bf6baa98 00303 (v01 PmRef ApIst 00003000 INTL 20060912)
    ACPI: Dynamic OEM Table Load:
    ACPI: SSDT (null) 00303 (v01 PmRef ApIst 00003000 INTL 20060912)
    ACPI: SSDT 00000000bf6b8d98 00119 (v01 PmRef ApCst 00003000 INTL 20060912)
    ACPI: Dynamic OEM Table Load:
    ACPI: SSDT (null) 00119 (v01 PmRef ApCst 00003000 INTL 20060912)
    ACPI: Interpreter enabled
    ACPI: (supports S0 S3 S5)
    ACPI: Using IOAPIC for interrupt routing
    ACPI: Power Resource [APPR] (off)
    ACPI: Power Resource [COMP] (on)
    ACPI: Power Resource [LPP] (on)
    ACPI: EC: GPE = 0x16, I/O: command/status = 0x66, data = 0x62
    ACPI: No dock devices found.
    PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
    ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
    pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7]
    pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff]
    pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
    pci_root PNP0A08:00: host bridge window [mem 0xc0000000-0xdfffffff]
    pci_root PNP0A08:00: host bridge window [mem 0xf0000000-0xfedfffff]
    pci_root PNP0A08:00: host bridge window [mem 0xfee01000-0xffffffff]
    PCI host bridge to bus 0000:00
    pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
    pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
    pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
    pci_bus 0000:00: root bus resource [mem 0xc0000000-0xdfffffff]
    pci_bus 0000:00: root bus resource [mem 0xf0000000-0xfedfffff]
    pci_bus 0000:00: root bus resource [mem 0xfee01000-0xffffffff]
    pci 0000:00:01.0: PCI bridge to [bus 01-01]
    pci 0000:00:1c.0: PCI bridge to [bus 02-02]
    pci 0000:00:1c.1: PCI bridge to [bus 03-43]
    pci 0000:00:1c.3: PCI bridge to [bus 44-44]
    pci 0000:00:1c.7: PCI bridge to [bus 45-45]
    pci 0000:46:06.0: proprietary Ricoh MMC controller disabled (via firewire function)
    pci 0000:46:06.0: MMC cards are now supported by standard SDHCI controller
    pci 0000:00:1e.0: PCI bridge to [bus 46-47] (subtractive decode)
    pci_bus 0000:47: [bus 47-4a] partially hidden behind transparent bridge 0000:46 [bus 46-47]
    pci0000:00: Requesting ACPI _OSC control (0x1d)
    pci0000:00: ACPI _OSC control (0x1d) granted
    ACPI: PCI Root Bridge [CPBG] (domain 0000 [bus ff])
    PCI host bridge to bus 0000:ff
    pci0000:ff: Requesting ACPI _OSC control (0x1d)
    pci0000:ff: ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d
    ACPI _OSC control for PCIe not granted, disabling ASPM
    ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 *10 12 14 15)
    ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 *5 6 7 11 12 14 15)
    ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
    ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
    ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 *10 12 14 15)
    ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
    ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
    ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
    vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
    vgaarb: loaded
    vgaarb: bridge control possible 0000:01:00.0
    SCSI subsystem initialized
    ACPI: bus type usb registered
    usbcore: registered new interface driver usbfs
    usbcore: registered new interface driver hub
    usbcore: registered new device driver usb
    Linux video capture interface: v2.00
    wmi: Mapper loaded
    Advanced Linux Sound Architecture Driver Version 1.0.25.
    PCI: Using ACPI for IRQ routing
    Bluetooth: Core ver 2.16
    NET: Registered protocol family 31
    Bluetooth: HCI device and connection manager initialized
    Bluetooth: HCI socket layer initialized
    Bluetooth: L2CAP socket layer initialized
    Bluetooth: SCO socket layer initialized
    cfg80211: Calling CRDA to update world regulatory domain
    hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
    hpet0: 8 comparators, 64-bit 14.318180 MHz counter
    Switching to clocksource hpet
    pnp: PnP ACPI init
    ACPI: bus type pnp registered
    system 00:01: [mem 0xfed1c000-0xfed1ffff] has been reserved
    system 00:01: [mem 0xfed10000-0xfed13fff] has been reserved
    system 00:01: [mem 0xfed1b000-0xfed1bfff] has been reserved
    system 00:01: [mem 0xfed19000-0xfed19fff] has been reserved
    system 00:01: [mem 0xd7700000-0xd7700fff] has been reserved
    system 00:01: [mem 0xe0000000-0xefffffff] has been reserved
    system 00:01: [mem 0xfed20000-0xfed3ffff] has been reserved
    system 00:01: [mem 0xfed90000-0xfed93fff] has been reserved
    system 00:01: [mem 0xfed45000-0xfed8ffff] has been reserved
    system 00:01: [mem 0xfec00000-0xfec00fff] could not be reserved
    system 00:07: [io 0x0200-0x027f] has been reserved
    system 00:07: [io 0x1000-0x100f] has been reserved
    system 00:07: [io 0xffff] has been reserved
    system 00:07: [io 0xffff] has been reserved
    system 00:07: [io 0x0400-0x047f] has been reserved
    system 00:07: [io 0x0500-0x057f] has been reserved
    system 00:07: [io 0xef80-0xef9f] has been reserved
    pnp: PnP ACPI: found 15 devices
    ACPI: ACPI bus type pnp unregistered
    pci 0000:01:00.0: no compatible bridge window for [mem 0xfff80000-0xffffffff pref]
    pci 0000:03:00.0: no compatible bridge window for [mem 0xfffe0000-0xffffffff pref]
    pci 0000:00:1e.0: BAR 15: assigned [mem 0xd8000000-0xdbffffff pref]
    pci 0000:01:00.0: BAR 6: assigned [mem 0xd3080000-0xd30fffff pref]
    pci 0000:00:01.0: PCI bridge to [bus 01-01]
    pci 0000:00:01.0: bridge window [io 0x5000-0x5fff]
    pci 0000:00:01.0: bridge window [mem 0xd2000000-0xd30fffff]
    pci 0000:00:01.0: bridge window [mem 0xc0000000-0xd1ffffff 64bit pref]
    pci 0000:00:1c.0: PCI bridge to [bus 02-02]
    pci 0000:00:1c.0: bridge window [mem 0xd7500000-0xd75fffff]
    pci 0000:03:00.0: BAR 6: assigned [mem 0xd3120000-0xd313ffff pref]
    pci 0000:00:1c.1: PCI bridge to [bus 03-43]
    pci 0000:00:1c.1: bridge window [io 0x3000-0x4fff]
    pci 0000:00:1c.1: bridge window [mem 0xd3500000-0xd74fffff]
    pci 0000:00:1c.1: bridge window [mem 0xd3100000-0xd31fffff 64bit pref]
    pci 0000:00:1c.3: PCI bridge to [bus 44-44]
    pci 0000:00:1c.3: bridge window [mem 0xd3400000-0xd34fffff]
    pci 0000:00:1c.7: PCI bridge to [bus 45-45]
    pci 0000:00:1c.7: bridge window [mem 0xd3300000-0xd33fffff]
    pci 0000:46:06.4: BAR 15: assigned [mem 0xd8000000-0xdbffffff pref]
    pci 0000:46:06.4: BAR 16: assigned [mem 0xdc000000-0xdfffffff]
    pci 0000:46:06.4: BAR 13: assigned [io 0x2000-0x20ff]
    pci 0000:46:06.4: BAR 14: assigned [io 0x2400-0x24ff]
    pci 0000:46:06.4: CardBus bridge to [bus 47-4a]
    pci 0000:46:06.4: bridge window [io 0x2000-0x20ff]
    pci 0000:46:06.4: bridge window [io 0x2400-0x24ff]
    pci 0000:46:06.4: bridge window [mem 0xd8000000-0xdbffffff pref]
    pci 0000:46:06.4: bridge window [mem 0xdc000000-0xdfffffff]
    pci 0000:00:1e.0: PCI bridge to [bus 46-47]
    pci 0000:00:1e.0: bridge window [io 0x2000-0x2fff]
    pci 0000:00:1e.0: bridge window [mem 0xd3200000-0xd32fffff]
    pci 0000:00:1e.0: bridge window [mem 0xd8000000-0xdbffffff pref]
    NET: Registered protocol family 2
    IP route cache hash table entries: 262144 (order: 9, 2097152 bytes)
    TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
    TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
    TCP: Hash tables configured (established 262144 bind 65536)
    TCP: reno registered
    UDP hash table entries: 4096 (order: 5, 131072 bytes)
    UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
    NET: Registered protocol family 1
    PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
    software IO TLB [mem 0xbafb8000-0xbefb7fff] (64MB) mapped at [ffff8800bafb8000-ffff8800befb7fff]
    kvm: VM_EXIT_LOAD_IA32_PERF_GLOBAL_CTRL does not work properly. Using workaround
    microcode: CPU0 sig=0x20655, pf=0x10, revision=0x2
    microcode: CPU1 sig=0x20655, pf=0x10, revision=0x2
    microcode: CPU2 sig=0x20655, pf=0x10, revision=0x2
    microcode: CPU3 sig=0x20655, pf=0x10, revision=0x2
    microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
    sha1_ssse3: Using SSSE3 optimized SHA-1 implementation
    audit: initializing netlink socket (disabled)
    type=2000 audit(1343202364.784:1): initialized
    HugeTLB registered 2 MB page size, pre-allocated 0 pages
    NTFS driver 2.1.30 [Flags: R/W].
    msgmni has been set to 15654
    NET: Registered protocol family 38
    Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
    io scheduler noop registered
    io scheduler deadline registered (default)
    io scheduler cfq registered
    pcieport 0000:00:01.0: Signaling PME through PCIe PME interrupt
    pci 0000:01:00.0: Signaling PME through PCIe PME interrupt
    pci 0000:01:00.1: Signaling PME through PCIe PME interrupt
    pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
    pcieport 0000:00:1c.1: Signaling PME through PCIe PME interrupt
    pci 0000:03:00.0: Signaling PME through PCIe PME interrupt
    pcieport 0000:00:1c.3: Signaling PME through PCIe PME interrupt
    pci 0000:44:00.0: Signaling PME through PCIe PME interrupt
    pcieport 0000:00:1c.7: Signaling PME through PCIe PME interrupt
    pci 0000:45:00.0: Signaling PME through PCIe PME interrupt
    pci_hotplug: PCI Hot Plug PCI Core version: 0.5
    pciehp 0000:00:1c.1:pcie04: HPC vendor_id 8086 device_id 3b44 ss_vid 103c ss_did 1521
    pciehp: PCI Express Hot Plug Controller Driver version: 0.4
    acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
    ACPI: AC Adapter [AC] (on-line)
    input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input0
    ACPI: Sleep Button [SLPB]
    input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input1
    ACPI: Lid Switch [LID]
    input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
    ACPI: Power Button [PWRF]
    acpi device:04: registered as cooling_device0
    ACPI: Can't attach device
    video: probe of LNXVIDEO:00 failed with error -2
    ACPI: Requesting acpi_cpufreq
    thermal LNXTHERM:00: registered as thermal_zone0
    ACPI: Thermal Zone [EXTZ] (52 C)
    thermal LNXTHERM:01: registered as thermal_zone1
    ACPI: Thermal Zone [EX2Z] (0 C)
    thermal LNXTHERM:02: registered as thermal_zone2
    ACPI: Thermal Zone [PWMZ] (38 C)
    thermal LNXTHERM:03: registered as thermal_zone3
    ACPI: Thermal Zone [LOCZ] (44 C)
    thermal LNXTHERM:04: registered as thermal_zone4
    ACPI: Thermal Zone [GFXZ] (0 C)
    thermal LNXTHERM:05: registered as thermal_zone5
    ACPI: Thermal Zone [BATZ] (30 C)
    thermal LNXTHERM:06: registered as thermal_zone6
    ACPI: Thermal Zone [EGXZ] (67 C)
    thermal LNXTHERM:07: registered as thermal_zone7
    ACPI: Thermal Zone [CPUZ] (53 C)
    thermal LNXTHERM:08: registered as thermal_zone8
    ACPI: Thermal Zone [MCHZ] (56 C)
    thermal LNXTHERM:09: registered as thermal_zone9
    ACPI: Thermal Zone [PCHZ] (67 C)
    ioatdma: Intel(R) QuickData Technology Driver 4.00
    Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
    ACPI: Battery Slot [BAT0] (battery present)
    ACPI: Battery Slot [BAT1] (battery absent)
    serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
    00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
    0000:00:16.3: ttyS1 at I/O 0x6050 (irq = 17) is a 16550A
    Non-volatile memory driver v1.3
    Hangcheck: starting hangcheck timer 0.9.1 (tick is 180 seconds, margin is 60 seconds).
    Hangcheck: Using getrawmonotonic().
    [drm] Initialized drm 1.1.0 20060810
    brd: module loaded
    loop: module loaded
    'Low Performance USB Block' driver is deprecated. Please switch to usb-storage
    usbcore: registered new interface driver ub
    ACPI Warning: 0x0000000000000460-0x000000000000047f SystemIO conflicts with Region \PMIO 1 (20120320/utaddress-251)
    ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
    lpc_ich: Resource conflict(s) found affecting iTCO_wdt
    ACPI Warning: 0x0000000000000428-0x000000000000042f SystemIO conflicts with Region \PMIO 1 (20120320/utaddress-251)
    ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
    ACPI Warning: 0x0000000000000500-0x000000000000057f SystemIO conflicts with Region \GPIO 1 (20120320/utaddress-251)
    ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
    lpc_ich: Resource conflict(s) found affecting gpio_ich
    ahci: SSS flag set, parallel bus scan disabled
    ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 3 Gbps 0x37 impl SATA mode
    ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part ems sxs apst
    scsi0 : ahci
    scsi1 : ahci
    scsi2 : ahci
    scsi3 : ahci
    scsi4 : ahci
    scsi5 : ahci
    ata1: SATA max UDMA/133 abar m2048@0xd7627000 port 0xd7627100 irq 46
    ata2: SATA max UDMA/133 abar m2048@0xd7627000 port 0xd7627180 irq 46
    ata3: SATA max UDMA/133 abar m2048@0xd7627000 port 0xd7627200 irq 46
    ata4: DUMMY
    ata5: SATA max UDMA/133 abar m2048@0xd7627000 port 0xd7627300 irq 46
    ata6: SATA max UDMA/133 abar m2048@0xd7627000 port 0xd7627380 irq 46
    tun: Universal TUN/TAP device driver, 1.6
    tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
    e1000e: Intel(R) PRO/1000 Network Driver - 2.0.0-k
    e1000e: Copyright(c) 1999 - 2012 Intel Corporation.
    e1000e 0000:00:19.0: (unregistered net_device): Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
    e1000e 0000:00:19.0: eth0: (PCI Express:2.5GT/s:Width x1) 68:b5:99:f2:f0:3d
    e1000e 0000:00:19.0: eth0: Intel(R) PRO/1000 Network Connection
    e1000e 0000:00:19.0: eth0: MAC: 9, PHY: 10, PBA No: 2052FF-0FF
    r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
    r8169 0000:03:00.0: eth1: RTL8168c/8111c at 0xffffc90000064000, 00:e0:4c:68:d5:5d, XID 1c4000c0 IRQ 48
    r8169 0000:03:00.0: eth1: jumbo features [frames: 6128 bytes, tx checksumming: ko]
    iwlwifi: Intel(R) Wireless WiFi Link AGN driver for Linux, in-tree:
    iwlwifi: Copyright(c) 2003-2012 Intel Corporation
    iwlwifi 0000:44:00.0: pci_resource_len = 0x00002000
    iwlwifi 0000:44:00.0: pci_resource_base = ffffc90000068000
    iwlwifi 0000:44:00.0: HW Revision ID = 0x35
    usbcore: registered new interface driver cdc_ether
    usbcore: registered new interface driver rndis_host
    usbcore: registered new interface driver ipheth
    firewire_ohci 0000:46:06.0: added OHCI v1.10 device as card 0, 4 IR + 4 IT contexts, quirks 0x11
    yenta_cardbus 0000:46:06.4: CardBus bridge found [103c:1521]
    ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
    ata1.00: unexpected _GTF length (8)
    ata1.00: ATA-8: Hitachi HTS725050A9A364, PC4OCH0A, max UDMA/100
    ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
    ata1.00: unexpected _GTF length (8)
    ata1.00: configured for UDMA/100
    scsi 0:0:0:0: Direct-Access ATA Hitachi HTS72505 PC4O PQ: 0 ANSI: 5
    sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
    sd 0:0:0:0: Attached scsi generic sg0 type 0
    sd 0:0:0:0: [sda] Write Protect is off
    sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    Refined TSC clocksource calibration: 2660.459 MHz.
    Switching to clocksource tsc
    ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
    ata2.00: unexpected _GTF length (8)
    ata2.00: ATAPI: hp BD-ROM BC-5501H, 2.90, max UDMA/100
    ata2.00: unexpected _GTF length (8)
    ata2.00: configured for UDMA/100
    sda: sda1 sda2 sda3 sda4 < sda5 >
    sd 0:0:0:0: [sda] Attached SCSI disk
    scsi 1:0:0:0: CD-ROM hp BD ROM BC-5501H 2.90 PQ: 0 ANSI: 5
    sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
    cdrom: Uniform CD-ROM driver Revision: 3.20
    sr 1:0:0:0: Attached scsi generic sg1 type 5
    firewire_core 0000:46:06.0: created device fw0: GUID 5566778811223344, S400
    ata3: SATA link down (SStatus 0 SControl 300)
    ata5: SATA link down (SStatus 0 SControl 300)
    ata6: SATA link down (SStatus 0 SControl 300)
    yenta_cardbus 0000:46:06.4: ISA IRQ mask 0x0cb8, PCI irq 22
    yenta_cardbus 0000:46:06.4: Socket status: 30000810
    pci_bus 0000:46: Raising subordinate bus# of parent bus (#46) from #47 to #4a
    yenta_cardbus 0000:46:06.4: pcmcia: parent PCI bridge window: [io 0x2000-0x2fff]
    yenta_cardbus 0000:46:06.4: pcmcia: parent PCI bridge window: [mem 0xd3200000-0xd32fffff]
    pcmcia_socket pcmcia_socket0: cs: memory probe 0xd3200000-0xd32fffff:
    excluding 0xd3200000-0xd320ffff
    yenta_cardbus 0000:46:06.4: pcmcia: parent PCI bridge window: [mem 0xd8000000-0xdbffffff pref]
    pcmcia_socket pcmcia_socket0: cs: memory probe 0xd8000000-0xdbffffff:
    excluding 0xd8000000-0xdbffffff
    ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
    ehci_hcd 0000:00:1a.0: EHCI Host Controller
    ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
    ehci_hcd 0000:00:1a.0: debug port 2
    ehci_hcd 0000:00:1a.0: irq 16, io mem 0xd7629000
    ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00
    usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
    usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
    usb usb1: Product: EHCI Host Controller
    usb usb1: Manufacturer: Linux 3.5.0 ehci_hcd
    usb usb1: SerialNumber: 0000:00:1a.0
    hub 1-0:1.0: USB hub found
    hub 1-0:1.0: 3 ports detected
    ehci_hcd 0000:00:1d.0: EHCI Host Controller
    ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
    ehci_hcd 0000:00:1d.0: debug port 2
    ehci_hcd 0000:00:1d.0: irq 20, io mem 0xd7628000
    ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00
    usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
    usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
    usb usb2: Product: EHCI Host Controller
    usb usb2: Manufacturer: Linux 3.5.0 ehci_hcd
    usb usb2: SerialNumber: 0000:00:1d.0
    hub 2-0:1.0: USB hub found
    hub 2-0:1.0: 3 ports detected
    uhci_hcd: USB Universal Host Controller Interface driver
    xhci_hcd 0000:45:00.0: xHCI Host Controller
    xhci_hcd 0000:45:00.0: new USB bus registered, assigned bus number 3
    xhci_hcd 0000:45:00.0: irq 19, io mem 0xd3300000
    usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
    usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
    usb usb3: Product: xHCI Host Controller
    usb usb3: Manufacturer: Linux 3.5.0 xhci_hcd
    usb usb3: SerialNumber: 0000:45:00.0
    hub 3-0:1.0: USB hub found
    hub 3-0:1.0: 2 ports detected
    xhci_hcd 0000:45:00.0: xHCI Host Controller
    xhci_hcd 0000:45:00.0: new USB bus registered, assigned bus number 4
    usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
    usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
    usb usb4: Product: xHCI Host Controller
    usb usb4: Manufacturer: Linux 3.5.0 xhci_hcd
    usb usb4: SerialNumber: 0000:45:00.0
    hub 4-0:1.0: USB hub found
    hub 4-0:1.0: 2 ports detected
    Initializing USB Mass Storage driver...
    usbcore: registered new interface driver usb-storage
    USB Mass Storage support registered.
    usbcore: registered new interface driver libusual
    usbcore: registered new interface driver usbserial
    usbserial: USB Serial Driver core
    usbcore: registered new interface driver ftdi_sio
    USB Serial support registered for FTDI USB Serial Device
    ftdi_sio: v1.6.0:USB FTDI Serial Converters Driver
    i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
    i8042: Detected active multiplexing controller, rev 1.1
    serio: i8042 KBD port at 0x60,0x64 irq 1
    serio: i8042 AUX0 port at 0x60,0x64 irq 12
    serio: i8042 AUX1 port at 0x60,0x64 irq 12
    serio: i8042 AUX2 port at 0x60,0x64 irq 12
    serio: i8042 AUX3 port at 0x60,0x64 irq 12
    mousedev: PS/2 mouse device common for all mice
    usbcore: registered new interface driver wacom
    rtc_cmos 00:08: RTC can wake from S4
    rtc_cmos 00:08: rtc core: registered rtc_cmos as rtc0
    rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
    i2c /dev entries driver
    usbcore: registered new interface driver uvcvideo
    USB Video Class driver (1.1.1)
    iTCO_wdt: Intel TCO WatchDog Timer Driver v1.07
    iTCO_vendor_support: vendor-support=0
    usbcore: registered new interface driver btusb
    cpuidle: using governor ladder
    cpuidle: using governor menu
    sdhci: Secure Digital Host Controller Interface driver
    sdhci: Copyright(c) Pierre Ossman
    sdhci-pci 0000:46:06.1: SDHCI controller found [1180:0822] (rev 25)
    sdhci-pci 0000:46:06.1: Will use DMA mode even though HW doesn't fully claim to support it.
    mmc0: SDHCI controller on PCI [0000:46:06.1] using DMA
    usbcore: registered new interface driver usbhid
    lis3lv02d: 8 bits sensor found
    hp_accel: driver loaded
    sdhci-pci 0000:46:06.1: Will use DMA mode even though HW doesn't fully claim to support it.
    pcmcia_socket pcmcia_socket0: pccard: PCMCIA card inserted into slot 0
    pcmcia 0.0: pcmcia: registering new device pcmcia0.0 (IRQ: 22)
    usb 1-1.1: new full-speed USB device number 3 using ehci_hcd
    hub 1-1.4:1.0: 4 ports detected
    usb 1-1.5: New USB device found, idVendor=04f2, idProduct=b15e
    usb 1-1.5: Manufacturer: Chicony Electronics Co., Ltd.
    usb 1-1.4.3: new low-speed USB device number 7 using ehci_hcd
    usb 1-1.4.3: Manufacturer: Logitech
    hid-generic 0003:046D:C30E.0001: input,hidraw0: USB HID v1.10 Keyboard [Logitech HID compliant keyboard] on usb-0000:00:1a.0-1.4.3/input0
    hid-generic 0003:046D:C03F.0003: input,hidraw2: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:1a.0-1.4.4/input0
    Netfilter messages via NETLINK v0.30.
    xt_time: kernel timezone is -0000
    TCP: cubic registered
    ip6_tables: (C) 2000-2006 Netfilter Core Team
    NET: Registered protocol family 15
    Bluetooth: BNEP (Ethernet Emulation) ver 1.3
    8021q: 802.1Q VLAN Support v1.8
    netpoll: netconsole: local port 4444
    netpoll: netconsole: local IP 10.11.1.234
    netpoll: netconsole: remote port 4444
    IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
    console [netcon0] enabled
    netconsole: network logging started
    ALSA device list:
    #0: HDA Intel at 0xd7620000 irq 55
    #1: HDA NVidia at 0xd3000000 irq 17
    EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
    VFS: Mounted root (ext4 filesystem) readonly on device 8:5.
    devtmpfs: mounted
    Freeing unused kernel memory: 540k freed
    Write protecting the kernel read-only data: 12288k
    Freeing unused kernel memory: 476k freed
    Freeing unused kernel memory: 1052k freed
    BUG: unable to handle kernel NULL pointer dereference at 0000000000000040
    IP: [<ffffffffa00c4145>] nv50_display_vblank_crtc_handler+0x25/0xe0 [nouveau]
    PGD 229da2067 PUD 229da1067 PMD 0
    Oops: 0000 [#1] PREEMPT SMP
    CPU 3
    Modules linked in: nouveau(+) ttm drm_kms_helper cfbcopyarea cfbimgblt cfbfillrect

    Pid: 1474, comm: modprobe Not tainted 3.5.0 #2 Hewlett-Packard HP EliteBook 8540w/1521
    RIP: 0010:[<ffffffffa00c4145>] [<ffffffffa00c4145>] nv50_display_vblank_crtc_handler+0x25/0xe0 [nouveau]
    RSP: 0018:ffff88023bcc3d88 EFLAGS: 00010096
    RAX: ffff880227000000 RBX: ffff880232331800 RCX: 000000000000001a
    RDX: ffff88023201b840 RSI: 0000000000000000 RDI: ffff880232331800
    RBP: ffff88023bcc3db8 R08: ffff8802322d8b00 R09: ffff880232400098
    R10: ffffffff812b46ec R11: 0000000000000414 R12: 0000000000000024
    R13: 0000000000000000 R14: 0000000000000000 R15: ffff880232331800
    FS: 00007fa46c99f700(0000) GS:ffff88023bcc0000(0000) knlGS:0000000000000000
    CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
    CR2: 0000000000000040 CR3: 000000022d415000 CR4: 00000000000007e0
    DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
    DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
    Process modprobe (pid: 1474, threadinfo ffff88022f520000, task ffff88023220ace0)
    Stack:
    ffff88023bccfa68 ffff880232331800 0000000000000024 ffff880227009460
    0000000000000000 0000000000000003 ffff88023bcc3e38 ffffffffa00c43e2
    0000000000000246 ffffffff8105f7ac ffff88023291c000 ffff88023bccfa88
    Call Trace:
    <IRQ>
    [<ffffffffa00c43e2>] nv50_display_isr+0x1e2/0x3b0 [nouveau]
    [<ffffffff8105f7ac>] ? native_smp_send_reschedule+0x3c/0x60
    [<ffffffff81779d49>] ? _raw_spin_unlock_irq+0x29/0x40
    [<ffffffffa003b2fb>] nouveau_irq_handler+0x9b/0x130 [nouveau]
    [<ffffffff81095560>] ? __queue_work+0x4b0/0x4b0
    [<ffffffff810e8705>] handle_irq_event_percpu+0x75/0x250
    [<ffffffff810e8923>] handle_irq_event+0x43/0x70
    [<ffffffff810eb722>] handle_fasteoi_irq+0x72/0x110
    [<ffffffff81043ffd>] handle_irq+0x1d/0x30
    [<ffffffff81043c98>] do_IRQ+0x58/0xe0
    [<ffffffff8177a0e7>] common_interrupt+0x67/0x67
    <EOI>
    [<ffffffff8177a216>] ? retint_kernel+0x26/0x30
    [<ffffffff812b46ec>] ? kobject_uevent_env+0x1cc/0x4b0
    [<ffffffff812c3a1a>] ? ioread32+0x3a/0x40
    [<ffffffffa00bd215>] ? nv50_evo_channel_init+0x225/0x2d0 [nouveau]
    [<ffffffffa0064887>] nv04_timer_read+0x27/0x80 [nouveau]
    [<ffffffffa00c5aba>] nv50_display_sync+0x1ca/0x3f0 [nouveau]
    [<ffffffffa00c62d5>] nv50_display_init+0x5f5/0x900 [nouveau]
    [<ffffffffa0057c8b>] nouveau_display_init+0x2b/0x100 [nouveau]
    [<ffffffffa00351cf>] nouveau_card_init+0x17cf/0x1800 [nouveau]
    [<ffffffffa0035797>] nouveau_load+0x457/0x8c0 [nouveau]
    [<ffffffff81375ffe>] drm_get_pci_dev+0x17e/0x2b0
    [<ffffffffa00db8d4>] nouveau_pci_probe+0x10/0x12 [nouveau]
    [<ffffffff812d724a>] local_pci_probe+0x5a/0xd0
    [<ffffffff812d7820>] pci_device_probe+0x80/0xb0
    [<ffffffff8138ca6a>] ? driver_sysfs_add+0x7a/0xb0
    [<ffffffff8138cdc6>] driver_probe_device+0x96/0x230
    [<ffffffff8138cffb>] __driver_attach+0x9b/0xa0
    [<ffffffff8138cf60>] ? driver_probe_device+0x230/0x230
    [<ffffffff8138b2ce>] bus_for_each_dev+0x5e/0x90
    [<ffffffff8138c9e9>] driver_attach+0x19/0x20
    [<ffffffff8138c470>] bus_add_driver+0x150/0x280
    [<ffffffff8138d58f>] driver_register+0x6f/0x130
    [<ffffffff812d7ab0>] __pci_register_driver+0x50/0xc0
    [<ffffffff81376244>] drm_pci_init+0x114/0x130
    [<ffffffffa010b000>] ? 0xffffffffa010afff
    [<ffffffffa010b000>] ? 0xffffffffa010afff
    [<ffffffffa010b04f>] nouveau_init+0x4f/0x51 [nouveau]
    [<ffffffff8100029d>] do_one_initcall+0x3d/0x170
    [<ffffffff810cf7d2>] sys_init_module+0x92/0x1e0
    [<ffffffff81780a62>] system_call_fastpath+0x16/0x1b
    Code: 90 90 90 90 90 90 55 48 89 e5 41 57 49 89 ff 41 56 41 55 41 89 f5 41 54 53 48 83 ec 08 48 8b 87 48 03 00 00 4c 8b b0 e8 00 00 00 <49> 8b 46 40 49 83 c6 40 4c 8d 60 f0 49 39 c6 49 8b 5c 24 10 0f
    RIP [<ffffffffa00c4145>] nv50_display_vblank_crtc_handler+0x25/0xe0 [nouveau]
    RSP <ffff88023bcc3d88>
    CR2: 0000000000000040
    ---[ end trace 2c1871b1d3dcbeaf ]---
    Kernel panic - not syncing: Fatal exception in interrupt
    \
     
     \ /
      Last update: 2012-07-25 11:21    [W:0.068 / U:0.632 seconds]
    ©2003-2016 Jasper Spaans. hosted at Digital OceanAdvertise on this site