lkml.org 
[lkml]   [2012]   [Jul]   [25]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
SubjectRe: [PATCH 1/3] drivers/misc: Add realtek card reader core driver
Hi Wei,

We do not use MMC_CAP_MAX_CURRENT_* anymore, for your host, I would
sugget you do something like this:

static void realtek_init(struct realtek_sdmmc *host)
{
struct mmc_host *mmc = host->mmc;
... ...
/*
* since you have set MMC_CAP_MAX_CURRENT_800 in your
* original code, I assume your host can provide more than
* 800mA, and you've set the 1.8v support bit in your original
* code for the host, so I also set the max_current_180 to 800mA.
*/
mmc->max_current_330 = 800;
mmc->max_current_180 = 800;
... ...
}

Does this look right to you?

Thanks,
Aaron

On Wed, Jul 25, 2012 at 10:04:15AM +0200, Borislav Petkov wrote:
> On Wed, Jul 25, 2012 at 10:28:39AM +0800, wwang wrote:
> > 于 2012年07月24日 22:07, Borislav Petkov 写道:
> > >Kernel is Linus' from yesterday: v3.5-709-ga6be1fcbc57f and config
> > >is attached.
> >
> > The compilation process is still OK with your config.
>
> Yes, but not with the kernel I'm using. If you'd tried that exact kernel
> you would've seen that because...
>
> >
> > MMC_CAP_MAX_CURRENT_200 is usually defined in
> > include/linux/mmc/host.h, can you help to check it in your kernel
> > code?
>
> ... MMC_CAP_MAX_CURRENT_* got removed by the patch at the end of this
> note and which went in through the MMC tree in this merge window:
>
> commit a6be1fcbc57f95bb47ef3c8e4ee3d83731b8f21e
> Merge: 5b160bd42694 30b87c60e9cb
> Author: Linus Torvalds <torvalds@linux-foundation.org>
> Date: Sun Jul 22 16:36:08 2012 -0700
>
> Merge tag 'mmc-merge-for-3.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc
> ...
>
> I'm adding some more people to Cc so that you can figure it all out
> among yourselves how to deal with the situation :)
>
> Thanks.
>
> ---
>
> commit 55c4665ea0a42fd6427826bfce96eb4b0389262a
> Author: Aaron Lu <aaron.lu@amd.com>
> Date: Wed Jul 4 13:31:48 2012 +0800
>
> mmc: sd: Fix sd current limit setting
>
> Host has different current capabilities at different voltages, we need
> to record these settings seperately. The defined voltages are 1.8/3.0/3.3.
> For other voltages, we do not touch current limit setting.
>
> Before we set the current limit for the sd card, find out the host's
> operating voltage first and then find out the current capabilities of
> the host at that voltage to set the current limit.
>
> Signed-off-by: Aaron Lu <aaron.lu@amd.com>
> Reviewed-by: Philip Rakity <prakity@marvell.com>
> Signed-off-by: Chris Ball <cjb@laptop.org>
>
> diff --git a/include/linux/mmc/host.h b/include/linux/mmc/host.h
> index 65c64ee578a7..f578a71d82a6 100644
> --- a/include/linux/mmc/host.h
> +++ b/include/linux/mmc/host.h
> @@ -189,6 +189,9 @@ struct mmc_host {
> u32 ocr_avail_sd; /* SD-specific OCR */
> u32 ocr_avail_mmc; /* MMC-specific OCR */
> struct notifier_block pm_notify;
> + u32 max_current_330;
> + u32 max_current_300;
> + u32 max_current_180;
>
> #define MMC_VDD_165_195 0x00000080 /* VDD voltage 1.65 - 1.95 */
> #define MMC_VDD_20_21 0x00000100 /* VDD voltage 2.0 ~ 2.1 */
> @@ -232,16 +235,9 @@ struct mmc_host {
> #define MMC_CAP_UHS_SDR50 (1 << 17) /* Host supports UHS SDR50 mode */
> #define MMC_CAP_UHS_SDR104 (1 << 18) /* Host supports UHS SDR104 mode */
> #define MMC_CAP_UHS_DDR50 (1 << 19) /* Host supports UHS DDR50 mode */
> -#define MMC_CAP_SET_XPC_330 (1 << 20) /* Host supports >150mA current at 3.3V */
> -#define MMC_CAP_SET_XPC_300 (1 << 21) /* Host supports >150mA current at 3.0V */
> -#define MMC_CAP_SET_XPC_180 (1 << 22) /* Host supports >150mA current at 1.8V */
> #define MMC_CAP_DRIVER_TYPE_A (1 << 23) /* Host supports Driver Type A */
> #define MMC_CAP_DRIVER_TYPE_C (1 << 24) /* Host supports Driver Type C */
> #define MMC_CAP_DRIVER_TYPE_D (1 << 25) /* Host supports Driver Type D */
> -#define MMC_CAP_MAX_CURRENT_200 (1 << 26) /* Host max current limit is 200mA */
> -#define MMC_CAP_MAX_CURRENT_400 (1 << 27) /* Host max current limit is 400mA */
> -#define MMC_CAP_MAX_CURRENT_600 (1 << 28) /* Host max current limit is 600mA */
> -#define MMC_CAP_MAX_CURRENT_800 (1 << 29) /* Host max current limit is 800mA */
> #define MMC_CAP_CMD23 (1 << 30) /* CMD23 supported. */
> #define MMC_CAP_HW_RESET (1 << 31) /* Hardware reset */
>
> --
> Regards/Gruss,
> Boris.
>

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2012-07-25 13:02    [W:1.047 / U:0.020 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site