lkml.org 
[lkml]   [2012]   [Jul]   [20]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Subject[PATCH] regulator: Use BUCK_FPWM_[MASK|SHIFT] macros to replace buck_pmap table
From
Date
Below is the buck_pmap mapping table:

BUCK1: mask = 1 << 0, shift = 0
BUCK2: mask = 1 << 1, shift = 1
BUCK3: mask = 1 << 2, shift = 2
BUCK4: mask = 1 << 3, shift = 3

The mask and shift can be easily calculated by:
mask = 1 << BUCK_ID
shift = BUCK_ID

This patch defines BUCK_FPWM_MASK and BUCK_FPWM_SHIFT macros to replace
buck_pmap mapping table.

Signed-off-by: Axel Lin <axel.lin@gmail.com>
---
drivers/regulator/lp8788-buck.c | 55 +++++++++------------------------------
1 file changed, 12 insertions(+), 43 deletions(-)
diff --git a/drivers/regulator/lp8788-buck.c b/drivers/regulator/lp8788-buck.c
index 0c93a6a..ba3e0aa 100644
--- a/drivers/regulator/lp8788-buck.c
+++ b/drivers/regulator/lp8788-buck.c
@@ -69,6 +69,9 @@
#define PIN_HIGH 1
#define ENABLE_TIME_USEC 32

+#define BUCK_FPWM_MASK(x) (1 << (x))
+#define BUCK_FPWM_SHIFT(x) (x)
+
enum lp8788_dvs_state {
DVS_LOW = GPIOF_OUT_INIT_LOW,
DVS_HIGH = GPIOF_OUT_INIT_HIGH,
@@ -86,15 +89,9 @@ enum lp8788_buck_id {
BUCK4,
};

-struct lp8788_pwm_map {
- u8 mask;
- u8 shift;
-};
-
struct lp8788_buck {
struct lp8788 *lp;
struct regulator_dev *regulator;
- struct lp8788_pwm_map *pmap;
void *dvs;
};

@@ -106,29 +103,6 @@ static const int lp8788_buck_vtbl[] = {
1950000, 2000000,
};

-/* buck pwm mode selection : used for set/get_mode in regulator ops
- * @forced pwm : fast mode
- * @auto pwm : normal mode
- */
-static struct lp8788_pwm_map buck_pmap[] = {
- [BUCK1] = {
- .mask = LP8788_FPWM_BUCK1_M,
- .shift = LP8788_FPWM_BUCK1_S,
- },
- [BUCK2] = {
- .mask = LP8788_FPWM_BUCK2_M,
- .shift = LP8788_FPWM_BUCK2_S,
- },
- [BUCK3] = {
- .mask = LP8788_FPWM_BUCK3_M,
- .shift = LP8788_FPWM_BUCK3_S,
- },
- [BUCK4] = {
- .mask = LP8788_FPWM_BUCK4_M,
- .shift = LP8788_FPWM_BUCK4_S,
- },
-};
-
static const u8 buck1_vout_addr[] = {
LP8788_BUCK1_VOUT0, LP8788_BUCK1_VOUT1,
LP8788_BUCK1_VOUT2, LP8788_BUCK1_VOUT3,
@@ -347,41 +321,37 @@ static int lp8788_buck_enable_time(struct regulator_dev *rdev)
static int lp8788_buck_set_mode(struct regulator_dev *rdev, unsigned int mode)
{
struct lp8788_buck *buck = rdev_get_drvdata(rdev);
- struct lp8788_pwm_map *pmap = buck->pmap;
- u8 val;
-
- if (!pmap)
- return -EINVAL;
+ enum lp8788_buck_id id = rdev_get_id(rdev);
+ u8 mask, val;

+ mask = BUCK_FPWM_MASK(id);
switch (mode) {
case REGULATOR_MODE_FAST:
- val = LP8788_FORCE_PWM << pmap->shift;
+ val = LP8788_FORCE_PWM << BUCK_FPWM_SHIFT(id);
break;
case REGULATOR_MODE_NORMAL:
- val = LP8788_AUTO_PWM << pmap->shift;
+ val = LP8788_AUTO_PWM << BUCK_FPWM_SHIFT(id);
break;
default:
return -EINVAL;
}

- return lp8788_update_bits(buck->lp, LP8788_BUCK_PWM, pmap->mask, val);
+ return lp8788_update_bits(buck->lp, LP8788_BUCK_PWM, mask, val);
}

static unsigned int lp8788_buck_get_mode(struct regulator_dev *rdev)
{
struct lp8788_buck *buck = rdev_get_drvdata(rdev);
- struct lp8788_pwm_map *pmap = buck->pmap;
+ enum lp8788_buck_id id = rdev_get_id(rdev);
u8 val;
int ret;

- if (!pmap)
- return -EINVAL;
-
ret = lp8788_read_byte(buck->lp, LP8788_BUCK_PWM, &val);
if (ret)
return ret;

- return val & pmap->mask ? REGULATOR_MODE_FAST : REGULATOR_MODE_NORMAL;
+ return val & BUCK_FPWM_MASK(id) ?
+ REGULATOR_MODE_FAST : REGULATOR_MODE_NORMAL;
}

static struct regulator_ops lp8788_buck12_ops = {
@@ -548,7 +518,6 @@ static __devinit int lp8788_buck_probe(struct platform_device *pdev)
return -ENOMEM;

buck->lp = lp;
- buck->pmap = &buck_pmap[id];

ret = lp8788_init_dvs(buck, id);
if (ret)
--
1.7.9.5




\
 
 \ /
  Last update: 2012-07-20 17:42    [from the cache]
©2003-2014 Jasper Spaans. Advertise on this site