lkml.org 
[lkml]   [2012]   [Jul]   [2]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 1/2] backlight: move register definitions from header to source
Date
ROM boundary definitions are no need to be exported because these are used only
in lp855x driver internally.

And few code cosmetic changes

Signed-off-by: Milo(Woogyom) Kim <milo.kim@ti.com>
---
drivers/video/backlight/lp855x_bl.c | 8 ++++++--
include/linux/lp855x.h | 6 ------
2 files changed, 6 insertions(+), 8 deletions(-)

diff --git a/drivers/video/backlight/lp855x_bl.c b/drivers/video/backlight/lp855x_bl.c
index 72a0e0c..3d24314 100644
--- a/drivers/video/backlight/lp855x_bl.c
+++ b/drivers/video/backlight/lp855x_bl.c
@@ -17,8 +17,12 @@
#include <linux/lp855x.h>

/* Registers */
-#define BRIGHTNESS_CTRL (0x00)
-#define DEVICE_CTRL (0x01)
+#define BRIGHTNESS_CTRL 0x00
+#define DEVICE_CTRL 0x01
+#define EEPROM_START 0xA0
+#define EEPROM_END 0xA7
+#define EPROM_START 0xA0
+#define EPROM_END 0xAF

#define BUF_SIZE 20
#define DEFAULT_BL_NAME "lcd-backlight"
diff --git a/include/linux/lp855x.h b/include/linux/lp855x.h
index 781a490..cc76f1f 100644
--- a/include/linux/lp855x.h
+++ b/include/linux/lp855x.h
@@ -47,12 +47,6 @@
(LP8556_I2C_ONLY << BRT_MODE_SHFT))
#define LP8556_COMB2_CONFIG (LP8556_COMBINED2 << BRT_MODE_SHFT)

-/* ROM area boundary */
-#define EEPROM_START (0xA0)
-#define EEPROM_END (0xA7)
-#define EPROM_START (0xA0)
-#define EPROM_END (0xAF)
-
enum lp855x_chip_id {
LP8550,
LP8551,
--
1.7.2.5

Best Regards,
Milo





\
 
 \ /
  Last update: 2012-07-03 04:01    [W:0.029 / U:1.940 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site