[lkml]   [2012]   [Jul]   [19]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
Messages in this thread
    SubjectRe: [PATCH] Input: eeti_ts: Mark as CONFIG_BROKEN
    On 17.07.2012 14:59, Daniel Mack wrote:
    > On 13.07.2012 09:01, Dmitry Torokhov wrote:
    >> On Wed, May 02, 2012 at 09:36:51PM -0700, Dmitry Torokhov wrote:
    >>> Hi Sven,
    >>> On Sat, Apr 07, 2012 at 08:38:33PM +0200, Sven Neumann wrote:
    >>>> Hi,
    >>>> On 07.04.12 09:02, Dmitry Torokhov wrote:
    >>>>> On Fri, Apr 06, 2012 at 10:40:07PM -0700, Olof Johansson wrote:
    >>>>>> This seems to have been broken since 2010, so obviously noone actually
    >>>>>> cares about the driver:
    >>>>>> make[4]: *** [drivers/input/touchscreen/eeti_ts.o] Error 1
    >>>>>> drivers/input/touchscreen/eeti_ts.c: In function 'eeti_ts_irq_active':
    >>>>>> drivers/input/touchscreen/eeti_ts.c:65:2: error: implicit declaration of function 'irq_to_gpio' [-Werror=implicit-function-declaration]
    >>>>>> irq_to_gpio isn't available on most platforms today, so the driver
    >>>>>> will need some rework by someone who has hardware access and can test
    >>>>>> (to make sure that, for example, switching to level interrupts and just
    >>>>>> keep taking them while there's more to process works).
    >>>>>> I guess it could just be scheduled for removal, but let's start with
    >>>>>> marking it CONFIG_BROKEN.
    >>>>> Well, it probably works quite well on arches that do have irq_to_gpio(),
    >>>>> let's ask Daniel and Sven if they still have this hardware and if they
    >>>>> can try the patch below that implements what you suggested.
    >>>> This hardware is still in use and we also still follow kernel
    >>>> development and try to update our customer devices to recent kernel
    >>>> versions regularly. Currently we are at 3.1.10 and the touchscreen
    >>>> works well with that. I'll try to update to a more recent kernel
    >>>> next week and will try your patch.
    >>> Did you have a chance to test the patch?
    >> *ping*
    >> It would be nice to get driver in mainline compile [and work] again...
    > We gave that patch a quick try today and it doesn't seem to work. We
    > don't get any events from the touch screen anymore. We need to debug
    > this further, hopefully by the end of this week.
    > If there's anything obvious in the setup of the threaded IRQ handler,
    > please let us know. Otherwise, I'll get back once I have a fixed version
    > of the patch.

    Ok, finally I found some time. In general, the patch works fine. The
    only detail I had to amend was the irqflags, which were changed from
    IRQF_TRIGGER_HIGH/IRQF_TRIGGER_LOW, which doesn't work as the PXA can't
    deal with level-based IRQs. Changing this back to RISING/FALLING makes
    the driver work again.

    With that correction, feel free to add my Acked-by:/Tested-by:

    Thanks and sorry again for the slow response.


     \ /
      Last update: 2012-07-19 18:21    [W:0.053 / U:4.500 seconds]
    ©2003-2016 Jasper Spaans. hosted at Digital OceanAdvertise on this site