lkml.org 
[lkml]   [2012]   [Jul]   [18]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 4/4] ARM: LPC32xx: Add PWM to base dts file
On 07/18/2012 02:06 PM, Roland Stigge wrote:
> From: Alexandre Pereira da Silva <aletes.xgr@gmail.com>
>
> Signed-off-by: Alexandre Pereira da Silva <aletes.xgr@gmail.com>
> Signed-off-by: Roland Stigge <stigge@antcom.de>
> ---
> arch/arm/boot/dts/lpc32xx.dtsi | 11 +++++++++++
> 1 file changed, 11 insertions(+)
>
> --- linux-2.6.orig/arch/arm/boot/dts/lpc32xx.dtsi
> +++ linux-2.6/arch/arm/boot/dts/lpc32xx.dtsi
> @@ -278,6 +278,17 @@
> status = "disabled";
> };
>
> + pwm1: pwm@0x4005C000 {
> + compatible = "nxp,lpc3220-pwm";
> + reg = <0x4005C000 0x4>;
> + status = "disabled";
> + };
> +
> + pwm2: pwm@0x4005C004 {
> + compatible = "nxp,lpc3220-pwm";
> + reg = <0x4005C004 0x4>;
> + status = "disabled";
> + };
> };
> };
> };

Sorry, grabbed old version of patch. Should have been:


pwm: pwm@4005C000 {
compatible = "nxp,lpc3220-pwm";
reg = <0x4005C000 0x8>;
status = "disabled";
};

... because the driver now always registers the two channels together.

Will push it this way.

Roland


\
 
 \ /
  Last update: 2012-07-18 15:01    [W:0.896 / U:0.116 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site