lkml.org 
[lkml]   [2012]   [Jul]   [13]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    /
    From
    SubjectRe: [PATCH 0/7] Add support for Freescale's mc34708 to mc13xxx driver
    Date
    Uwe Kleine-König  <u.kleine-koenig@pengutronix.de> writes:

    > It doesn't move it around, that's only how it looks. I removed enum
    > mc13xxx_id (above MC13XXX_NUMREGS) and added struct mc13xxx_variant
    > (below MC13XXX_NUMREGS). Git choosed to use the closing brace of enum
    > mc13xxx_id and struct mc13xxx_variant respectively as context (together
    > with the following empty line).
    > (For the new readers, here is how git represented the relevant part:
    >
    > #include <linux/regmap.h>
    > #include <linux/mfd/mc13xxx.h>
    >
    > -enum mc13xxx_id {
    > - MC13XXX_ID_MC13783,
    > - MC13XXX_ID_MC13892,
    > - MC13XXX_ID_INVALID,
    > +#define MC13XXX_NUMREGS 0x3f
    > +
    > +struct mc13xxx;
    > +
    > +struct mc13xxx_variant {
    > + const char *name;
    > + void (*print_revision)(struct mc13xxx *mc13xxx, u32 revision);
    > };
    >
    > -#define MC13XXX_NUMREGS 0x3f
    > +extern struct mc13xxx_variant
    > + mc13xxx_variant_mc13783,
    > + mc13xxx_variant_mc13892;
    >
    > struct mc13xxx {
    > struct regmap *regmap;
    > ...
    > )
    >
    > The following would be an equivalent and (for humans) easier to review
    > patch:
    >
    > #include <linux/regmap.h>
    > #include <linux/mfd/mc13xxx.h>
    >
    > -enum mc13xxx_id {
    > - MC13XXX_ID_MC13783,
    > - MC13XXX_ID_MC13892,
    > - MC13XXX_ID_INVALID,
    > -};
    > -
    > #define MC13XXX_NUMREGS 0x3f
    >
    > +struct mc13xxx;
    > +
    > +struct mc13xxx_variant {
    > + const char *name;
    > + void (*print_revision)(struct mc13xxx *mc13xxx, u32 revision);
    > +};
    > +
    > +extern struct mc13xxx_variant
    > + mc13xxx_variant_mc13783,
    > + mc13xxx_variant_mc13892;
    > +
    > struct mc13xxx {
    > struct regmap *regmap;
    > ...
    >
    > But as this touches 17 lines compared to only 15 using the way git
    > choosed to represent patch 6, git used the smaller representation.

    Yes. Useful information bits per line count is the primary thing
    our default xdiff based output pays attention to (e.g. we coalesce
    two adjacent hunks that are one missing context line apart into one
    larger hunk by removing the "@@ linenum @@" line from the beginning
    of the latter hunk for this reason).

    > Usually this metric is sane, but here it's not. I don't know if you can
    > do anything about it? E.g. take the number of +, - and context blocks
    > into account. Then it would be 5 for the patch above vs. 7 for the
    > way git did it.
    > Or weight a context line containing
    >
    > #define MC13XXX_NUMREGS 0x3f
    >
    > more than two lines one of which is empty and the other only contains a
    > }?

    "GNU diff" gives the same output as ours, and "git diff --patience"
    gives more redundant (it wasts lines by removing "};" and then later
    adding "};" back) output. I think this is because "patience" pays
    more attention to key off unique lines in the range (e.g. the line
    "#define MC13XXX_NUMREGS 0x3f" appears only once in the preimage and
    also in the postimage, so it must pair with each other).
    --
    To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
    the body of a message to majordomo@vger.kernel.org
    More majordomo info at http://vger.kernel.org/majordomo-info.html
    Please read the FAQ at http://www.tux.org/lkml/

    \
     
     \ /
      Last update: 2012-07-13 22:21    [W:2.294 / U:0.156 seconds]
    ©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site