lkml.org 
[lkml]   [2012]   [Jun]   [6]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH] Disable Bus Master on PCI device shutdown
On Wed, Jun 06, 2012 at 10:17:43AM -0600, Khalid Aziz wrote:

> That is a good piece of information. I see your concern and agree with
> it. My take is shutdown method for the drivers will end all active I/O
> and clear the I/O queue. This should take care of any DMA caused by an
> I/O request originating in the kernel. For devices like NIC, a DMA can
> be triggered by an incoming packet and I am trying to stop that by
> disabling Bus Master bit. This is the issue that was reported on kexec
> mailing list in July of last year and it involved qla driver. I observed
> similar problem with kexec on ia64 many years ago and had written a
> patch to disable Bus Master bit on kexec. This patch was in ia64 tree
> for some time before it was removed. HP shipped kernels with this patch
> for many years and those kernels have been in deployment in field for
> some 7+ years with no problems.

If the qla driver knows that this is safe, then can't this just be done
in the qla driver?

--
Matthew Garrett | mjg59@srcf.ucam.org


\
 
 \ /
  Last update: 2012-06-06 19:01    [W:0.103 / U:0.004 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site