lkml.org 
[lkml]   [2012]   [Jun]   [6]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
SubjectRe: [PATCH 1/1] mx3fb: support pan display with fb_set_var
On Wed, 30 May 2012, Liu Ying wrote:

> Users may call FBIOPUT_VSCREENINFO ioctrl to do pan display.
> This ioctrl relies on fb_set_var() to do the job. fb_set_var()
> calls custom fb_set_par() method and then calls custom
> fb_pan_display() method. The current implementation of mx3fb
> reinitializes IPU display controller every time the custom
> fb_set_par() method is called, which makes the display flash
> if fb_set_var() is called to do panning frequently. The custom
> fb_pan_display() method checks if the current xoffset and
> yoffset are different from previous ones before doing actual
> panning, which prevents the panning from happening within the
> fb_set_var() context. This patch checks new var info to decide
> whether we really need to reinitialize IPU display controller.
> We ignore xoffset and yoffset update because it doesn't require
> to reinitialize the controller. Users may specify activate field
> of var info with FB_ACTIVATE_NOW and FB_ACTIVATE_FORCE to
> reinialize the controller by force. Meanwhile, this patch removes
> the check in custom fb_pan_display() method mentioned before to
> have the panning work within fb_set_var() context. It doesn't
> hurt to do panning again if there is no update for xoffset and
> yoffset.

You are really addressing 2 separate problems here: (1) panning cannot be
set using FBIOPUT_VSCREENINFO and (2) screen flashes every time
fb_set_var() is called, even if only panning is required. The reason for
the first one is, that in fb_set_var() info->var is already updated from
the new *var when fb_pan_display() is called. So, as you correctly
identified, the condition

if (fbi->var.xoffset == var->xoffset &&
fbi->var.yoffset == var->yoffset)
return 0; /* No change, do nothing */

is trivially met and no panning takes place. Instead, you can use your
idea to cache var_info locally and check against that one to see, whether
offsets have changed, instead of removing that check completely.

To solve the second problem you can use your check against the cached copy
of var_info. See below for more details.

>
> Signed-off-by: Liu Ying <Ying.Liu@freescale.com>
> ---
> drivers/video/mx3fb.c | 31 +++++++++++++++++++++++++++----
> 1 files changed, 27 insertions(+), 4 deletions(-)
>
> diff --git a/drivers/video/mx3fb.c b/drivers/video/mx3fb.c
> index e3406ab..238b9aa 100644
> --- a/drivers/video/mx3fb.c
> +++ b/drivers/video/mx3fb.c
> @@ -269,6 +269,8 @@ struct mx3fb_info {
> struct scatterlist sg[2];
>
> u32 sync; /* preserve var->sync flags */

An incremental patch could then also remove the above .sync member and
switch to using .cur_var.sync instead.

> +
> + struct fb_var_screeninfo cur_var; /* current var info */
> };
>
> static void mx3fb_dma_done(void *);
> @@ -721,6 +723,26 @@ static void mx3fb_dma_done(void *arg)
> complete(&mx3_fbi->flip_cmpl);
> }
>
> +static bool mx3fb_need_not_to_set_par(struct fb_info *fbi)

How about inverting logic and calling the function
mx3fb_must_update_par()?

> +{
> + struct mx3fb_info *mx3_fbi = fbi->par;
> + struct fb_var_screeninfo old_var = mx3_fbi->cur_var;
> + struct fb_var_screeninfo new_var = fbi->var;
> +
> + if ((fbi->var.activate & FB_ACTIVATE_FORCE) &&
> + (fbi->var.activate & FB_ACTIVATE_MASK) == FB_ACTIVATE_NOW)
> + return false;
> +
> + /*
> + * Ignore xoffset and yoffset update,
> + * because pan display handles this case.
> + */
> + old_var.xoffset = new_var.xoffset;
> + old_var.yoffset = new_var.yoffset;
> +
> + return !memcmp(&old_var, &new_var, sizeof(struct fb_var_screeninfo));
> +}
> +
> static int __set_par(struct fb_info *fbi, bool lock)
> {
> u32 mem_len;
> @@ -732,6 +754,9 @@ static int __set_par(struct fb_info *fbi, bool lock)
> struct idmac_video_param *video = &ichan->params.video;
> struct scatterlist *sg = mx3_fbi->sg;
>
> + if (mx3fb_need_not_to_set_par(fbi))
> + return 0;
> +

__set_par() is called from 2 locations: from mx3fb_set_par() and
init_fb_chan(), called from probing. You don't need to perform the above
check in init_fb_chan() - there you always have to configure. Maybe better
put it in mx3fb_set_par() just before calling __set_par() like

ret = mx3fb_must_set_par() ? __set_par() : 0;

As mentioned above, this solves problem #2 and should go into patch #2.

> /* Total cleanup */
> if (mx3_fbi->txd)
> sdc_disable_channel(mx3_fbi);
> @@ -808,6 +833,8 @@ static int __set_par(struct fb_info *fbi, bool lock)
> if (mx3_fbi->blank == FB_BLANK_UNBLANK)
> sdc_enable_channel(mx3_fbi);
>
> + mx3_fbi->cur_var = fbi->var;
> +

Yes, but preserve xoffset and yoffset - you don't apply them yet in
__set_par().

> return 0;
> }
>
> @@ -1068,10 +1095,6 @@ static int mx3fb_pan_display(struct fb_var_screeninfo *var,
> return -EINVAL;
> }
>
> - if (fbi->var.xoffset == var->xoffset &&
> - fbi->var.yoffset == var->yoffset)
> - return 0; /* No change, do nothing */
> -

I think, it would be better not to remove these completely, but check
against cached .cur_var, and then update those values too.

> y_bottom = var->yoffset;
>
> if (!(var->vmode & FB_VMODE_YWRAP))
> --
> 1.7.1

Makes sense? Or have I misunderstood something?

Thanks
Guennadi
---
Guennadi Liakhovetski, Ph.D.
Freelance Open-Source Software Developer
http://www.open-technology.de/


\
 
 \ /
  Last update: 2012-06-06 18:41    [W:0.076 / U:0.808 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site