lkml.org 
[lkml]   [2012]   [Jun]   [5]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v3] mfd/ab8500: print switch off cause
Date
From: Jonas Aaberg <jonas.aberg@stericsson.com>

Instead of just printing the register value, also output some
description of the value.

Signed-off-by: Jonas Aaberg <jonas.aberg@stericsson.com>
Reviewed-by: Mattias Wallin <mattias.wallin@stericsson.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
---
ChangeLog v2->v3:
- Use printk() with KERN_CONT instead of separate dev_* or
printk() calls. (Review comment from Joe Perches.)
ChangeLog v1->v2:
- Print each cause on its own line with a tab to avoid missing
initial cause heading if loglevel < info.
---
drivers/mfd/ab8500-core.c | 25 ++++++++++++++++++++++++-
1 file changed, 24 insertions(+), 1 deletion(-)

diff --git a/drivers/mfd/ab8500-core.c b/drivers/mfd/ab8500-core.c
index dac0e29..279bdeb 100644
--- a/drivers/mfd/ab8500-core.c
+++ b/drivers/mfd/ab8500-core.c
@@ -1217,6 +1217,15 @@ static const struct of_device_id ab8500_match[] = {

static int __devinit ab8500_probe(struct platform_device *pdev)
{
+ static char *switch_off_status[] = {
+ "Swoff bit programming",
+ "Thermal protection activation",
+ "Vbat lower then BattOk falling threshold",
+ "Watchdog expired",
+ "Non presence of 32kHz clock",
+ "Battery level lower than power on reset threshold",
+ "Power on key 1 pressed longer than 10 seconds",
+ "DB8500 thermal shutdown"};
struct ab8500_platform_data *plat = dev_get_platdata(&pdev->dev);
const struct platform_device_id *platid = platform_get_device_id(pdev);
enum ab8500_version version = AB8500_VERSION_UNDEFINED;
@@ -1323,7 +1332,21 @@ static int __devinit ab8500_probe(struct platform_device *pdev)
AB8500_SWITCH_OFF_STATUS, &value);
if (ret < 0)
return ret;
- dev_info(ab8500->dev, "switch off status: %#x", value);
+ dev_info(ab8500->dev, "switch off cause(s) (%#x): ", value);
+
+ if (value) {
+ for (i = 0; i < ARRAY_SIZE(switch_off_status); i++) {
+ if (value & 1)
+ printk(KERN_CONT " \"%s\"",
+ switch_off_status[i]);
+ value = value >> 1;
+
+ }
+ printk(KERN_CONT "\n");
+ } else {
+ printk(KERN_CONT " None\n");
+ }
+

if (plat && plat->init)
plat->init(ab8500);
--
1.7.9.2


\
 
 \ /
  Last update: 2012-06-05 10:41    [W:0.037 / U:1.148 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site