lkml.org 
[lkml]   [2012]   [Jun]   [4]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
Subject[PATCH 1/3] ACPI: Make acpi_skip_timer_override cover all source_irq==0 cases
From b10f528c1973e89bf6a4da8f91d62228c259acba Mon Sep 17 00:00:00 2001
From: Feng Tang <feng.tang@intel.com>
Date: Mon, 4 Jun 2012 10:40:26 +0800
Subject: [PATCH 1/3] ACPI: Make acpi_skip_timer_override cover all
source_irq==0 cases

Currently when acpi_skip_timer_override is set, it only cover the
(source_irq == 0 && global_irq == 2) cases. While there is also
platform which need use this option and its global_irq is not 2.
This patch will extend acpi_skip_timer_override to cover all
timer overriding cases as long as the source irq is 0.

This is the first part of a fix to kernel bug bugzilla 40002:
"IRQ 0 assigned to VGA"
https://bugzilla.kernel.org/show_bug.cgi?id=40002

Reported-and-tested-by: Szymon Kowalczyk <fazerxlo@o2.pl>
Signed-off-by: Feng Tang <feng.tang@intel.com>
---
arch/x86/kernel/acpi/boot.c | 14 ++++++++------
1 files changed, 8 insertions(+), 6 deletions(-)
diff --git a/arch/x86/kernel/acpi/boot.c b/arch/x86/kernel/acpi/boot.c
index 8afb693..e7c698e 100644
--- a/arch/x86/kernel/acpi/boot.c
+++ b/arch/x86/kernel/acpi/boot.c
@@ -422,12 +422,14 @@ acpi_parse_int_src_ovr(struct acpi_subtable_header * header,
return 0;
}

- if (intsrc->source_irq == 0 && intsrc->global_irq == 2) {
+ if (intsrc->source_irq == 0) {
if (acpi_skip_timer_override) {
- printk(PREFIX "BIOS IRQ0 pin2 override ignored.\n");
+ printk(PREFIX "BIOS IRQ0 override ignored.\n");
return 0;
}
- if (acpi_fix_pin2_polarity && (intsrc->inti_flags & ACPI_MADT_POLARITY_MASK)) {
+
+ if ((intsrc->global_irq == 2) && acpi_fix_pin2_polarity
+ && (intsrc->inti_flags & ACPI_MADT_POLARITY_MASK)) {
intsrc->inti_flags &= ~ACPI_MADT_POLARITY_MASK;
printk(PREFIX "BIOS IRQ0 pin2 override: forcing polarity to high active.\n");
}
@@ -1334,7 +1336,7 @@ static int __init dmi_disable_acpi(const struct dmi_system_id *d)
}

/*
- * Force ignoring BIOS IRQ0 pin2 override
+ * Force ignoring BIOS IRQ0 override
*/
static int __init dmi_ignore_irq0_timer_override(const struct dmi_system_id *d)
{
@@ -1344,7 +1346,7 @@ static int __init dmi_ignore_irq0_timer_override(const struct dmi_system_id *d)
*/
if (!acpi_skip_timer_override) {
WARN(1, KERN_ERR "ati_ixp4x0 quirk not complete.\n");
- pr_notice("%s detected: Ignoring BIOS IRQ0 pin2 override\n",
+ pr_notice("%s detected: Ignoring BIOS IRQ0 override\n",
d->ident);
acpi_skip_timer_override = 1;
}
@@ -1438,7 +1440,7 @@ static struct dmi_system_id __initdata acpi_dmi_table_late[] = {
* is enabled. This input is incorrectly designated the
* ISA IRQ 0 via an interrupt source override even though
* it is wired to the output of the master 8259A and INTIN0
- * is not connected at all. Force ignoring BIOS IRQ0 pin2
+ * is not connected at all. Force ignoring BIOS IRQ0
* override in that cases.
*/
{
--
1.7.9

\
 
 \ /
  Last update: 2012-06-04 08:01    [from the cache]
©2003-2014 Jasper Spaans. Advertise on this site