lkml.org 
[lkml]   [2012]   [Jun]   [27]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    /
    SubjectRe: [PATCH v3] printk: Have printk() never buffer its data
    From
    Date
    On Wed, 2012-06-27 at 11:13 -0400, Steven Rostedt wrote:

    > I just tested this patch and it boots fine for me.

    Of course after sending this, I rebooted to the same kernel and it
    locked up :-p

    Ends with:

    [ 47.966454] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
    [ 48.188791] kvm: disabled by bios
    [ 48.352547] snd_hda_intel 0000:00:1b.0: irq 44 for MSI/MSI-X
    [ 48.410944] ALSA hda_auto_parser.c:322 autoconfig: line_outs=4 (0xd/0xf/0x10/0x11/0x0) type:line
    [ 48.419774] ALSA hda_auto_parser.c:326 speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
    [ 48.427012] ALSA hda_auto_parser.c:330 hp_outs=1 (0xa/0x0/0x0/0x0/0x0)
    [ 48.433848] ALSA hda_auto_parser.c:331 mono: mono_out=0x0
    [ 48.439523] ALSA hda_auto_parser.c:334 dig-out=0x21/0x0
    [ 48.445023] ALSA hda_auto_parser.c:335 inputs:[ 48.449562] ALSA hda_auto_parser.c:339 Front Mic=0xb[ 48.454451] ALSA hda_auto_parser.c:339 Rear Mic=0xe[ 48.459258] ALSA hda_auto_parser.c:339 Line=0xc

    -- Steve

    > Better still, I put
    > in my 'delay' to make sure the output shows up as it is printed, and it
    > seems to do so.
    >
    > Tested-by: Steven Rostedt <rostedt@goodmis.org>




    \
     
     \ /
      Last update: 2012-06-27 18:01    [W:0.050 / U:31.020 seconds]
    ©2003-2016 Jasper Spaans. hosted at Digital OceanAdvertise on this site