lkml.org 
[lkml]   [2012]   [Jun]   [26]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v6 1/5] powerpc/85xx: implement hardware timebase sync
On 06/26/2012 09:03 AM, Kumar Gala wrote:
>
> On Jun 26, 2012, at 5:25 AM, Zhao Chenhui wrote:
>
>> Do hardware timebase sync. Firstly, stop all timebases, and transfer
>> the timebase value of the boot core to the other core. Finally,
>> start all timebases.
>>
>> Only apply to dual-core chips, such as MPC8572, P2020, etc.
>>
>> Signed-off-by: Zhao Chenhui <chenhui.zhao@freescale.com>
>> Signed-off-by: Li Yang <leoli@freescale.com>
>> ---
>> Changes for v6:
>> * added 85xx_TB_SYNC
>> * added isync() after set_tb()
>> * removed extra entries from mpc85xx_smp_guts_ids
>
> Why only on dual-core chips? Is this because of something related to
> 2 cores, or related to corenet vs non-corenet SoCs and how turning
> on/off the timebase works in the SOC?

Some parts are due to corenet versus non-corenet, such as the actual
register you write to to disable/enable the timebase.

There's also a two-core assumption in the synchronization code which
I've complained about multiple times -- although on closer inspection it
looks like this is done under cpu_add_remove_lock, and we can assume
that there's only one core at a time in take_timebase(), regardless of
how many cores are in the system.

-Scott



\
 
 \ /
  Last update: 2012-06-27 00:21    [W:0.968 / U:0.028 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site