lkml.org 
[lkml]   [2012]   [Jun]   [26]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectBUG: No init found on NFSROOT
Hi Trond,

It's found that this commit in linux-next leads to the below boot hang.

da660bb2774ff21c7263b4061198c5abe0629cb4 is the first bad commit
commit da660bb2774ff21c7263b4061198c5abe0629cb4
Author: Trond Myklebust <Trond.Myklebust@netapp.com>
Date: Thu Jun 21 14:53:10 2012 -0400

SUNRPC: Clean up xdr_read_pages and xdr_enter_page

Move the page alignment code into a separate helper.

Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

:040000 040000 742f2939849ea8ff2e4b954316e6ea2933e7e018 6809fe8bd11b9f2459168d6e1dac92b0c5a74eef M net
bisect run success

The "held lock freed" message may or may not appear in the tests.
However the "No init found." message reliably appears in all test runs.

[ 133.909702] =========================
[ 133.910694] [ BUG: held lock freed! ]
[ 133.911700] 3.5.0-rc4+ #5 Not tainted
[ 133.912672] -------------------------
[ 133.912969] swapper/0/0 is freeing memory ffff88001233ce08-ffff88001233de07, with a lock still held there!
[ 133.912969] (slock-AF_INET-RPC/1){+.-...}, at: [<ffffffff82ae84ee>] tcp_v4_rcv+0x28b/0x6fc
[ 133.912969] 3 locks held by swapper/0/0:
[ 133.912969] #0: (rcu_read_lock){.+.+..}, at: [<ffffffff82a1ea8a>] rcu_lock_acquire+0x0/0x29
[ 133.912969] #1: (rcu_read_lock){.+.+..}, at: [<ffffffff82aca483>] rcu_lock_acquire.constprop.14+0x0/0x30
[ 133.912969] #2: (slock-AF_INET-RPC/1){+.-...}, at: [<ffffffff82ae84ee>] tcp_v4_rcv+0x28b/0x6fc
[ 133.912969]
[ 133.912969] stack backtrace:
[ 133.912969] Pid: 0, comm: swapper/0 Not tainted 3.5.0-rc4+ #5
[ 133.912969] Call Trace:
[ 133.912969] <IRQ> [<ffffffff810e09ae>] debug_check_no_locks_freed+0x109/0x14b
[ 133.912969] [<ffffffff811774e0>] kmem_cache_free+0x2e/0xa7
[ 133.912969] [<ffffffff82a191e5>] __kfree_skb+0x7f/0x83
[ 133.912969] [<ffffffff82adeccd>] tcp_ack+0x45d/0xc6a
[ 133.912969] [<ffffffff810c22ae>] ? local_clock+0x3b/0x52
[ 133.912969] [<ffffffff82adff44>] tcp_rcv_state_process+0x15a/0x7c6
[ 133.912969] [<ffffffff82ae79e7>] tcp_v4_do_rcv+0x341/0x390
[ 133.912969] [<ffffffff82ae88db>] tcp_v4_rcv+0x678/0x6fc
[ 133.912969] [<ffffffff82aca618>] ip_local_deliver_finish+0x165/0x1e4
[ 133.912969] [<ffffffff82acab4a>] ip_local_deliver+0x53/0x84
[ 133.912969] [<ffffffff810c228c>] ? local_clock+0x19/0x52
[ 133.912969] [<ffffffff82aca9c6>] ip_rcv_finish+0x32f/0x367
[ 133.912969] [<ffffffff82acad8b>] ip_rcv+0x210/0x269
[ 133.912969] [<ffffffff82a1eab1>] ? rcu_lock_acquire+0x27/0x29
[ 133.912969] [<ffffffff82a1ea8a>] ? softnet_seq_show+0x68/0x68
[ 133.912969] [<ffffffff82a21ede>] __netif_receive_skb+0x3cd/0x464
[ 133.912969] [<ffffffff82a21fda>] netif_receive_skb+0x65/0x9c
[ 133.912969] [<ffffffff82a227c5>] ? __napi_gro_receive+0xf2/0xff
[ 133.912969] [<ffffffff82a2209e>] napi_skb_finish+0x26/0x58
[ 133.912969] [<ffffffff810c228c>] ? local_clock+0x19/0x52
[ 133.912969] [<ffffffff82a228c5>] napi_gro_receive+0x2f/0x34
[ 133.912969] [<ffffffff81e36d12>] e1000_receive_skb+0x57/0x60
[ 133.912969] [<ffffffff81e39b23>] e1000_clean_rx_irq+0x2f2/0x387
[ 133.912969] [<ffffffff81e390f3>] e1000_clean+0x541/0x695
[ 133.912969] [<ffffffff8106c57b>] ? kvm_clock_read+0x2e/0x36
[ 133.912969] [<ffffffff82a22402>] ? net_rx_action+0x1b3/0x1f8
[ 133.912969] [<ffffffff82a22302>] net_rx_action+0xb3/0x1f8
[ 133.912969] [<ffffffff810984ab>] ? __do_softirq+0x76/0x1e8
[ 133.912969] [<ffffffff81098515>] __do_softirq+0xe0/0x1e8
[ 133.912969] [<ffffffff81122190>] ? time_hardirqs_off+0x26/0x2a
[ 133.912969] [<ffffffff82ea7fec>] call_softirq+0x1c/0x30
[ 133.912969] [<ffffffff81049cc8>] do_softirq+0x4a/0xa2
[ 133.912969] [<ffffffff8109888e>] irq_exit+0x51/0xbc
[ 133.912969] [<ffffffff82ea88ae>] do_IRQ+0x8e/0xa5
[ 133.912969] [<ffffffff82ea002f>] common_interrupt+0x6f/0x6f
[ 133.912969] <EOI> [<ffffffff8106c76b>] ? native_safe_halt+0x6/0x8
[ 133.912969] [<ffffffff810e08a3>] ? trace_hardirqs_on+0xd/0xf
[ 133.912969] [<ffffffff8104f384>] default_idle+0x53/0x90
[ 133.912969] [<ffffffff8104fc09>] cpu_idle+0xcc/0x123
[ 133.912969] [<ffffffff82d1d8dd>] rest_init+0xd1/0xda
[ 133.912969] [<ffffffff82d1d80c>] ? csum_partial_copy_generic+0x16c/0x16c
[ 133.912969] [<ffffffff8460dbbc>] start_kernel+0x3da/0x3e7
[ 133.912969] [<ffffffff8460d5ea>] ? repair_env_string+0x5a/0x5a
[ 133.912969] [<ffffffff8460d2d6>] x86_64_start_reservations+0xb1/0xb5
[ 133.912969] [<ffffffff8460d3d8>] x86_64_start_kernel+0xfe/0x10b
[ 134.024230] VFS: Mounted root (nfs filesystem) on device 0:14.
[ 134.025782] debug: unmapping init [mem 0xffffffff84437000-0xffffffff8480efff]
[ 134.027686] Write protecting the kernel read-only data: 49152k
[ 134.029956] debug: unmapping init [mem 0xffff880002eb0000-0xffff880002ffffff]
[ 134.031745] debug: unmapping init [mem 0xffff880003e95000-0xffff880003ffffff]
[ 134.059408] request_module: runaway loop modprobe binfmt-0000
[ 134.062946] kworker/u:0 (2781) used greatest stack depth: 3432 bytes left
[ 134.069553] Kernel panic - not syncing: No init found. Try passing init= option to kernel. See Linux Documentation/init.txt for guidance.
[ 134.072742] Pid: 1, comm: swapper/0 Not tainted 3.5.0-rc4+ #5
[ 134.074200] Call Trace:
[ 134.074971] [<ffffffff82e4fc90>] panic+0xbd/0x1d0
[ 134.076237] [<ffffffff82e4ccc7>] init_post+0xc8/0xc8
[ 134.077636] [<ffffffff8460dd8e>] kernel_init+0x1c5/0x1c5
[ 134.078979] [<ffffffff8460d590>] ? do_early_param+0x8c/0x8c
[ 134.080408] [<ffffffff82ea7ef4>] kernel_thread_helper+0x4/0x10
[ 134.082038] [<ffffffff82ea00f0>] ? retint_restore_args+0x13/0x13
[ 134.083514] [<ffffffff8460dbc9>] ? start_kernel+0x3e7/0x3e7
[ 134.084997] [<ffffffff82ea7ef0>] ? gs_change+0x13/0x13

Thanks,
Fengguang


\
 
 \ /
  Last update: 2012-06-26 17:41    [W:0.068 / U:1.016 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site