lkml.org 
[lkml]   [2012]   [Jun]   [22]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 2/3] MFD: add missing hunk to change irq to clear on read
Date
During conversion to regmap_irq this hunk was missing being moved
to MFD driver to put the chip into clear on read mode. Also as slave
is now set use it to determine which slave for the register call.

Signed-off-by: Graeme Gregory <gg@slimlogic.co.uk>
---
drivers/mfd/palmas.c | 9 ++++++++-
1 file changed, 8 insertions(+), 1 deletion(-)
diff --git a/drivers/mfd/palmas.c b/drivers/mfd/palmas.c
index 7dfb018..7ec7d8d 100644
--- a/drivers/mfd/palmas.c
+++ b/drivers/mfd/palmas.c
@@ -356,7 +356,14 @@ static int __devinit palmas_i2c_probe(struct i2c_client *i2c,
}
}

- ret = regmap_add_irq_chip(palmas->regmap[1], palmas->irq,
+ /* Change IRQ into clear on read mode for efficiency */
+ slave = PALMAS_BASE_TO_SLAVE(PALMAS_INTERRUPT_BASE);
+ addr = PALMAS_BASE_TO_REG(PALMAS_INTERRUPT_BASE, PALMAS_INT_CTRL);
+ reg = PALMAS_INT_CTRL_INT_CLEAR;
+
+ regmap_write(palmas->regmap[slave], addr, reg);
+
+ ret = regmap_add_irq_chip(palmas->regmap[slave], palmas->irq,
IRQF_ONESHOT | IRQF_TRIGGER_LOW, -1, &palmas_irq_chip,
&palmas->irq_data);
if (ret < 0)
--
1.7.9.5


\
 
 \ /
  Last update: 2012-06-22 15:21    [W:0.052 / U:0.544 seconds]
©2003-2014 Jasper Spaans. Advertise on this site