Messages in this thread | | | Date | Mon, 18 Jun 2012 16:06:45 +0200 | From | Takashi Iwai <> | Subject | Re: [PATCH 1/3] maestro3: Remove unused AC97 register definitions |
| |
At Mon, 11 Jun 2012 16:58:49 -0300, Ezequiel Garcia wrote: > > Cc: Jaroslav Kysela <perex@perex.cz> > Cc: Takashi Iwai <tiwai@suse.de> > Cc: Clemens Ladisch <clemens@ladisch.de> > Signed-off-by: Ezequiel Garcia <elezegarcia@gmail.com>
Applied this one, but left others for now.
thanks,
Takashi
> --- > sound/pci/maestro3.c | 68 -------------------------------------------------- > 1 files changed, 0 insertions(+), 68 deletions(-) > > diff --git a/sound/pci/maestro3.c b/sound/pci/maestro3.c > index deef213..adb3b4c 100644 > --- a/sound/pci/maestro3.c > +++ b/sound/pci/maestro3.c > @@ -361,74 +361,6 @@ MODULE_PARM_DESC(amp_gpio, "GPIO pin number for external amp. (default = -1)"); > #define DSP2HOST_REQ_I2SRATE 0x02 > #define DSP2HOST_REQ_TIMER 0x04 > > -/* AC97 registers */ > -/* XXX fix this crap up */ > -/*#define AC97_RESET 0x00*/ > - > -#define AC97_VOL_MUTE_B 0x8000 > -#define AC97_VOL_M 0x1F > -#define AC97_LEFT_VOL_S 8 > - > -#define AC97_MASTER_VOL 0x02 > -#define AC97_LINE_LEVEL_VOL 0x04 > -#define AC97_MASTER_MONO_VOL 0x06 > -#define AC97_PC_BEEP_VOL 0x0A > -#define AC97_PC_BEEP_VOL_M 0x0F > -#define AC97_SROUND_MASTER_VOL 0x38 > -#define AC97_PC_BEEP_VOL_S 1 > - > -/*#define AC97_PHONE_VOL 0x0C > -#define AC97_MIC_VOL 0x0E*/ > -#define AC97_MIC_20DB_ENABLE 0x40 > - > -/*#define AC97_LINEIN_VOL 0x10 > -#define AC97_CD_VOL 0x12 > -#define AC97_VIDEO_VOL 0x14 > -#define AC97_AUX_VOL 0x16*/ > -#define AC97_PCM_OUT_VOL 0x18 > -/*#define AC97_RECORD_SELECT 0x1A*/ > -#define AC97_RECORD_MIC 0x00 > -#define AC97_RECORD_CD 0x01 > -#define AC97_RECORD_VIDEO 0x02 > -#define AC97_RECORD_AUX 0x03 > -#define AC97_RECORD_MONO_MUX 0x02 > -#define AC97_RECORD_DIGITAL 0x03 > -#define AC97_RECORD_LINE 0x04 > -#define AC97_RECORD_STEREO 0x05 > -#define AC97_RECORD_MONO 0x06 > -#define AC97_RECORD_PHONE 0x07 > - > -/*#define AC97_RECORD_GAIN 0x1C*/ > -#define AC97_RECORD_VOL_M 0x0F > - > -/*#define AC97_GENERAL_PURPOSE 0x20*/ > -#define AC97_POWER_DOWN_CTRL 0x26 > -#define AC97_ADC_READY 0x0001 > -#define AC97_DAC_READY 0x0002 > -#define AC97_ANALOG_READY 0x0004 > -#define AC97_VREF_ON 0x0008 > -#define AC97_PR0 0x0100 > -#define AC97_PR1 0x0200 > -#define AC97_PR2 0x0400 > -#define AC97_PR3 0x0800 > -#define AC97_PR4 0x1000 > - > -#define AC97_RESERVED1 0x28 > - > -#define AC97_VENDOR_TEST 0x5A > - > -#define AC97_CLOCK_DELAY 0x5C > -#define AC97_LINEOUT_MUX_SEL 0x0001 > -#define AC97_MONO_MUX_SEL 0x0002 > -#define AC97_CLOCK_DELAY_SEL 0x1F > -#define AC97_DAC_CDS_SHIFT 6 > -#define AC97_ADC_CDS_SHIFT 11 > - > -#define AC97_MULTI_CHANNEL_SEL 0x74 > - > -/*#define AC97_VENDOR_ID1 0x7C > -#define AC97_VENDOR_ID2 0x7E*/ > - > /* > * ASSP control regs > */ > -- > 1.7.4.4 >
| |