lkml.org 
[lkml]   [2012]   [Jun]   [17]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRE: [PATCH 5/5] regulator: Support AP watchdog reset operation for s5m8767a
Date
On Thu, Jun 18, 2012 at 3:53 AM, Mark Brown wrote:
> > Solution
> > - Basic concept: After ap watchdog reset, GPIO configuration is
> > changed by default value
> > - S5M8767A has function of voltage control with gpio (8 levels with 3
> > gpios)
> > - Set bootable voltage on level 0 -> can work with default gpio
> > configuration
> > - In the probing, Change voltage control level from level 0 to level 1
> > - Execute normal dvfs operation on level 1
> > - After watchdog reset, ap gpio is set by default value
> > - PMIC operation mode is changed by ap reset (level1 -> level0)
> > - AP can execute normal boot
>
> OK, so basically what you're doing is fixing one of the GPIO selected voltage levels so that when
> the AP comes out of reset it'll drive the PMIC into a suitable level for it to boot? That makes
> sense
That's right.
The voltage of S5M8767A can be controlled by GPIO.
So, I try to check the status of gpio.
I will resend above patch with adding detail commit message.

Thanks,
Sangbeom.



\
 
 \ /
  Last update: 2012-06-18 02:41    [W:0.163 / U:0.348 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site