Messages in this thread Patch in this message | | | Subject | [PATCH] regulator: tps62360: Remove chip_id and voltage_base from struct tps62360_chip | From | Axel Lin <> | Date | Thu, 14 Jun 2012 09:38:26 +0800 |
| |
The chip_id is not used. The voltage_base is not necessary, set base voltage to tps->desc.min_uV instead.
Signed-off-by: Axel Lin <axel.lin@gmail.com> --- drivers/regulator/tps62360-regulator.c | 7 ++----- 1 file changed, 2 insertions(+), 5 deletions(-)
diff --git a/drivers/regulator/tps62360-regulator.c b/drivers/regulator/tps62360-regulator.c index e534269..ec3d0d5 100644 --- a/drivers/regulator/tps62360-regulator.c +++ b/drivers/regulator/tps62360-regulator.c @@ -65,10 +65,8 @@ struct tps62360_chip { struct regulator_desc desc; struct regulator_dev *rdev; struct regmap *regmap; - int chip_id; int vsel0_gpio; int vsel1_gpio; - int voltage_base; u8 voltage_reg_mask; bool en_internal_pulldn; bool en_discharge; @@ -408,13 +406,13 @@ static int __devinit tps62360_probe(struct i2c_client *client, switch (chip_id) { case TPS62360: case TPS62362: - tps->voltage_base = TPS62360_BASE_VOLTAGE; + tps->desc.min_uV = TPS62360_BASE_VOLTAGE; tps->voltage_reg_mask = 0x3F; tps->desc.n_voltages = TPS62360_N_VOLTAGES; break; case TPS62361: case TPS62363: - tps->voltage_base = TPS62361_BASE_VOLTAGE; + tps->desc.min_uV = TPS62361_BASE_VOLTAGE; tps->voltage_reg_mask = 0x7F; tps->desc.n_voltages = TPS62361_N_VOLTAGES; break; @@ -427,7 +425,6 @@ static int __devinit tps62360_probe(struct i2c_client *client, tps->desc.ops = &tps62360_dcdc_ops; tps->desc.type = REGULATOR_VOLTAGE; tps->desc.owner = THIS_MODULE; - tps->desc.min_uV = tps->voltage_base; tps->desc.uV_step = 10000; tps->regmap = devm_regmap_init_i2c(client, &tps62360_regmap_config); -- 1.7.9.5
| |