lkml.org 
[lkml]   [2012]   [Jun]   [13]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Date
SubjectRE: [PATCH 2/2] PM: Devfreq: Add frequency get function in profile
Ok, I got it. So this patch has no too much use.

Thanks
Xiaoguang


-----Original Message-----
From: MyungJoo Ham [mailto:myungjoo.ham@samsung.com]
Sent: 2012年6月13日 12:58
To: Xiaoguang Chen; linux-kernel@vger.kernel.org
Cc: 박경민; linux-pm@lists.linux-foundation.org
Subject: Re: [PATCH 2/2] PM: Devfreq: Add frequency get function in profile

> when devfreq set one frequency, the final frequency may not the same
> as the requested frequency. Add get function in profile to let devfreq
> driver return the final frequency.
>
> Signed-off-by: Xiaoguang Chen <chenxg@marvell.com>

That is why in update_freq() function that you've modified uses:

err = devfreq->profile->target(devfreq->dev.parent, &freq, flags);

not

err = devfreq->profile->target(devfreq->dev.parent, freq, flags);

The target function will return the configured frequency right there.
Calling "__devfreq_get()" at the same location wouldn't help as long as the "target()" callback is implemented correctly.



Cheers!
MyungJoo

> ---
> drivers/devfreq/devfreq.c | 12 +++++++++++-
> include/linux/devfreq.h | 2 ++
> 2 files changed, 13 insertions(+), 1 deletions(-)
>
> diff --git a/drivers/devfreq/devfreq.c b/drivers/devfreq/devfreq.c
> index 2144200..50a4fc0 100644
> --- a/drivers/devfreq/devfreq.c
> +++ b/drivers/devfreq/devfreq.c
> @@ -72,6 +72,16 @@ static struct devfreq *find_device_devfreq(struct device *dev)
> return ERR_PTR(-ENODEV);
> }
>
> +static unsigned long __devfreq_get(struct device *dev) {
> + struct devfreq *devfreq = to_devfreq(dev);
> + unsigned long ret_freq = devfreq->previous_freq;
> + if (!devfreq->profile->get)
> + return ret_freq;
> + ret_freq = devfreq->profile->get(devfreq->dev.parent);
> + return ret_freq;
> +}
> +
> /**
> * update_devfreq() - Reevaluate the device and configure frequency.
> * @devfreq: the devfreq instance.
> @@ -116,7 +126,7 @@ int update_devfreq(struct devfreq *devfreq)
> if (err)
> return err;
>
> - devfreq->previous_freq = freq;
> + devfreq->previous_freq = __devfreq_get(&devfreq->dev);
> return err;
> }
>
> diff --git a/include/linux/devfreq.h b/include/linux/devfreq.h index
> e5e4036..f789314 100644
> --- a/include/linux/devfreq.h
> +++ b/include/linux/devfreq.h
> @@ -65,6 +65,7 @@ struct devfreq_frequency_table {
> * @initial_freq The operating frequency when devfreq_add_device() is
> * called.
> * @polling_ms The polling interval in ms. 0 disables polling.
> + * @get Get the devices's actual frequency
> * @target The device should set its operating frequency at
> * freq or lowest-upper-than-freq value. If freq is
> * higher than any operable frequency, set maximum.
> @@ -84,6 +85,7 @@ struct devfreq_dev_profile {
> unsigned long initial_freq;
> unsigned int polling_ms;
>
> + unsigned long (*get)(struct device *dev);
> int (*target)(struct device *dev, unsigned long *freq, u32 flags);
> int (*get_dev_status)(struct device *dev,
> struct devfreq_dev_status *stat);
> --
> 1.7.0.4
\
 
 \ /
  Last update: 2012-06-13 08:01    [W:0.046 / U:0.376 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site