lkml.org 
[lkml]   [2012]   [Jun]   [12]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Subject[PATCH] ARM: remove linkup-l1110.h
From
Date
No file includes this header. Nothing seems interested in the things
this header provides. It appears that it has never been included since
at least v2.6.12-rc2. It can safely be removed.

Signed-off-by: Paul Bolle <pebolle@tiscali.nl>
---
Tested by "git grepping" the (history of) the tree for a few things.
arch/arm/include/asm/hardware/linkup-l1110.h | 48 --------------------------
1 files changed, 0 insertions(+), 48 deletions(-)
delete mode 100644 arch/arm/include/asm/hardware/linkup-l1110.h
diff --git a/arch/arm/include/asm/hardware/linkup-l1110.h b/arch/arm/include/asm/hardware/linkup-l1110.h
deleted file mode 100644
index 7ec9116..0000000
--- a/arch/arm/include/asm/hardware/linkup-l1110.h
+++ /dev/null
@@ -1,48 +0,0 @@
-/*
-*
-* Definitions for H3600 Handheld Computer
-*
-* Copyright 2001 Compaq Computer Corporation.
-*
-* Use consistent with the GNU GPL is permitted,
-* provided that this copyright notice is
-* preserved in its entirety in all copies and derived works.
-*
-* COMPAQ COMPUTER CORPORATION MAKES NO WARRANTIES, EXPRESSED OR IMPLIED,
-* AS TO THE USEFULNESS OR CORRECTNESS OF THIS CODE OR ITS
-* FITNESS FOR ANY PARTICULAR PURPOSE.
-*
-* Author: Jamey Hicks.
-*
-*/
-
-/* LinkUp Systems PCCard/CompactFlash Interface for SA-1100 */
-
-/* PC Card Status Register */
-#define LINKUP_PRS_S1 (1 << 0) /* voltage control bits S1-S4 */
-#define LINKUP_PRS_S2 (1 << 1)
-#define LINKUP_PRS_S3 (1 << 2)
-#define LINKUP_PRS_S4 (1 << 3)
-#define LINKUP_PRS_BVD1 (1 << 4)
-#define LINKUP_PRS_BVD2 (1 << 5)
-#define LINKUP_PRS_VS1 (1 << 6)
-#define LINKUP_PRS_VS2 (1 << 7)
-#define LINKUP_PRS_RDY (1 << 8)
-#define LINKUP_PRS_CD1 (1 << 9)
-#define LINKUP_PRS_CD2 (1 << 10)
-
-/* PC Card Command Register */
-#define LINKUP_PRC_S1 (1 << 0)
-#define LINKUP_PRC_S2 (1 << 1)
-#define LINKUP_PRC_S3 (1 << 2)
-#define LINKUP_PRC_S4 (1 << 3)
-#define LINKUP_PRC_RESET (1 << 4)
-#define LINKUP_PRC_APOE (1 << 5) /* Auto Power Off Enable: clears S1-S4 when either nCD goes high */
-#define LINKUP_PRC_CFE (1 << 6) /* CompactFlash mode Enable: addresses A[10:0] only, A[25:11] high */
-#define LINKUP_PRC_SOE (1 << 7) /* signal output driver enable */
-#define LINKUP_PRC_SSP (1 << 8) /* sock select polarity: 0 for socket 0, 1 for socket 1 */
-#define LINKUP_PRC_MBZ (1 << 15) /* must be zero */
-
-struct linkup_l1110 {
- volatile short prc;
-};
--
1.7.7.6


\
 
 \ /
  Last update: 2012-06-12 12:42    [from the cache]
©2003-2014 Jasper Spaans. Advertise on this site