[lkml]   [2012]   [Jun]   [11]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
Messages in this thread
    SubjectRe: dmatest to use synopsys dma driver (dw_dmac.c)
    On Mon, 2012-06-11 at 17:06 +0530, wrote: 
    > >> 1. dmatest with ported dw_dmac.c (from linux-3.4 to linux-3.2.2):
    > >>dmatest started automatically and tries test with all registered 8
    > >>channels of our dma engine but we get crashes with every channel as
    > shown
    > >>below:
    > These crashes are solved but I get same " test timed out" for this ported
    > driver too
    > as I was getting with original one. After debugging, it seems that after
    > dma transfer is complete no interrupt is
    > generated.......I have verified irq number etc , handler registered
    > properly but I don get any interrupts..
    > I am looking into the code to see whether there is any polling mechanism
    > is used in the driver ?

    I have few patches to fix this driver for our hardware.
    The dw_dmac has few issues, one of them is impossibility to configure
    some important parts of the IP-block like block_ts or tr_width.

    So, I could send patchset which probably helps you a bit.

    Andy Shevchenko <>
    Intel Finland Oy

     \ /
      Last update: 2012-06-11 17:22    [W:0.031 / U:98.308 seconds]
    ©2003-2016 Jasper Spaans. hosted at Digital OceanAdvertise on this site