lkml.org 
[lkml]   [2012]   [May]   [26]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    /
    Date
    From
    SubjectRe: [PATCH] STA2X11 CAN: CAN driver for the STA2X11 board
    On 05/26/2012 10:36 AM, Federico Vaga wrote:
    >> Thanks for your contribution. At a first glance, this driver looks
    >> similar to the pch_can and the c_can driver. It seems that a C_CAN based
    >> controller is used on that board as well. If that's true, it should be
    >> handled by the C_CAN driver. To get ride of the obsolete pch_can driver,
    >> I sent some time ago the patch "[RFC/PATCH] c_can: add driver for the
    >> PCH CAN controller":
    >>
    >> http://marc.info/?t=132991563600003&r=1&w=4
    >>
    >> I could serve as base of a generic c_can_pci driver.
    >
    > You are right, this is a C-CAN but it isn't specified on the board manual.
    > I compared the board manual with the Bosch C-CAN manual, and it is the same.

    Like with the Intel EG20T PCH CAN controller.

    > I'm working on a PCI module for this board, when it is ready we can think for
    > a generic c_can_pci

    That would be nice, thanks. You might have realized that AnilKumar has
    provided support for the D_CAN controllers to the C_CAN driver which
    will show up mainline soon.

    Wolfgang.



    \
     
     \ /
      Last update: 2012-05-26 22:41    [W:6.045 / U:0.328 seconds]
    ©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site