lkml.org 
[lkml]   [2012]   [May]   [2]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH] MFD: twl6040: Add regulator support for VIO, V2V1 supplies
Date
twl6040 has three power supply source:
VBAT needs to be connected to VBAT, VIO, and V2V1.
Add regulator support for the VIO, V2V1 supplies.
Initially handle the two supply together with bulk commands.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Reviewed-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
---
drivers/mfd/twl6040-core.c | 33 +++++++++++++++++++++++++++++----
include/linux/mfd/twl6040.h | 2 ++
2 files changed, 31 insertions(+), 4 deletions(-)

Hi Samuel,

The runtime dependencies for this patch has been sent to linux-omap list:
http://marc.info/?l=linux-omap&m=133596645010228&w=2
http://marc.info/?l=linux-omap&m=133596645610232&w=2
http://marc.info/?l=linux-omap&m=133596644310224&w=2
http://marc.info/?l=linux-omap&m=133596643310220&w=2

Alone this patch does not cause compile time regression but in runtime it needs
the arch/arm/mach-omap2 patches.
I try to avoid cross tree issues as much as I can and I'm happy if these will
come together in linux-next (and finally in 3.5).

Regards,
Peter

diff --git a/drivers/mfd/twl6040-core.c b/drivers/mfd/twl6040-core.c
index 493f4a6..7a92d95 100644
--- a/drivers/mfd/twl6040-core.c
+++ b/drivers/mfd/twl6040-core.c
@@ -27,6 +27,7 @@
#include <linux/types.h>
#include <linux/slab.h>
#include <linux/kernel.h>
+#include <linux/err.h>
#include <linux/platform_device.h>
#include <linux/gpio.h>
#include <linux/delay.h>
@@ -35,8 +36,10 @@
#include <linux/err.h>
#include <linux/mfd/core.h>
#include <linux/mfd/twl6040.h>
+#include <linux/regulator/consumer.h>

#define VIBRACTRL_MEMBER(reg) ((reg == TWL6040_REG_VIBCTLL) ? 0 : 1)
+#define TWL6040_NUM_SUPPLIES (2)

int twl6040_reg_read(struct twl6040 *twl6040, unsigned int reg)
{
@@ -532,6 +535,21 @@ static int __devinit twl6040_probe(struct i2c_client *client,

i2c_set_clientdata(client, twl6040);

+ twl6040->supplies[0].supply = "vio";
+ twl6040->supplies[1].supply = "v2v1";
+ ret = regulator_bulk_get(&client->dev, TWL6040_NUM_SUPPLIES,
+ twl6040->supplies);
+ if (ret != 0) {
+ dev_err(&client->dev, "Failed to get supplies: %d\n", ret);
+ goto regulator_get_err;
+ }
+
+ ret = regulator_bulk_enable(TWL6040_NUM_SUPPLIES, twl6040->supplies);
+ if (ret != 0) {
+ dev_err(&client->dev, "Failed to enable supplies: %d\n", ret);
+ goto power_err;
+ }
+
twl6040->dev = &client->dev;
twl6040->irq = client->irq;
twl6040->irq_base = pdata->irq_base;
@@ -552,13 +570,13 @@ static int __devinit twl6040_probe(struct i2c_client *client,
ret = gpio_request_one(twl6040->audpwron, GPIOF_OUT_INIT_LOW,
"audpwron");
if (ret)
- goto gpio1_err;
+ goto gpio_err;
}

/* codec interrupt */
ret = twl6040_irq_init(twl6040);
if (ret)
- goto gpio2_err;
+ goto irq_init_err;

ret = request_threaded_irq(twl6040->irq_base + TWL6040_IRQ_READY,
NULL, twl6040_naudint_handler, 0,
@@ -618,10 +636,14 @@ mfd_err:
free_irq(twl6040->irq_base + TWL6040_IRQ_READY, twl6040);
irq_err:
twl6040_irq_exit(twl6040);
-gpio2_err:
+irq_init_err:
if (gpio_is_valid(twl6040->audpwron))
gpio_free(twl6040->audpwron);
-gpio1_err:
+gpio_err:
+ regulator_bulk_disable(TWL6040_NUM_SUPPLIES, twl6040->supplies);
+power_err:
+ regulator_bulk_free(TWL6040_NUM_SUPPLIES, twl6040->supplies);
+regulator_get_err:
i2c_set_clientdata(client, NULL);
err:
return ret;
@@ -643,6 +665,9 @@ static int __devexit twl6040_remove(struct i2c_client *client)
mfd_remove_devices(&client->dev);
i2c_set_clientdata(client, NULL);

+ regulator_bulk_disable(TWL6040_NUM_SUPPLIES, twl6040->supplies);
+ regulator_bulk_free(TWL6040_NUM_SUPPLIES, twl6040->supplies);
+
return 0;
}

diff --git a/include/linux/mfd/twl6040.h b/include/linux/mfd/twl6040.h
index b15b5f0..6659487 100644
--- a/include/linux/mfd/twl6040.h
+++ b/include/linux/mfd/twl6040.h
@@ -27,6 +27,7 @@

#include <linux/interrupt.h>
#include <linux/mfd/core.h>
+#include <linux/regulator/consumer.h>

#define TWL6040_REG_ASICID 0x01
#define TWL6040_REG_ASICREV 0x02
@@ -203,6 +204,7 @@ struct regmap;
struct twl6040 {
struct device *dev;
struct regmap *regmap;
+ struct regulator_bulk_data supplies[2]; /* supplies for vio, v2v1 */
struct mutex mutex;
struct mutex io_mutex;
struct mutex irq_mutex;
--
1.7.8.6


\
 
 \ /
  Last update: 2012-05-02 16:21    [W:0.039 / U:0.124 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site