lkml.org 
[lkml]   [2012]   [May]   [13]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    Patch in this message
    /
    Subject[PATCH] regulator: anatop: Convert to regulator_list_voltage_linear()
    From
    Date
    Signed-off-by: Axel Lin <axel.lin@gmail.com>
    ---
    drivers/regulator/anatop-regulator.c | 15 +++------------
    1 files changed, 3 insertions(+), 12 deletions(-)

    diff --git a/drivers/regulator/anatop-regulator.c b/drivers/regulator/anatop-regulator.c
    index 49b2112..e433b36 100644
    --- a/drivers/regulator/anatop-regulator.c
    +++ b/drivers/regulator/anatop-regulator.c
    @@ -96,21 +96,10 @@ static int anatop_get_voltage_sel(struct regulator_dev *reg)
    return val - anatop_reg->min_bit_val;
    }

    -static int anatop_list_voltage(struct regulator_dev *reg, unsigned selector)
    -{
    - struct anatop_regulator *anatop_reg = rdev_get_drvdata(reg);
    - int uv;
    -
    - uv = anatop_reg->min_voltage + selector * 25000;
    - dev_dbg(&reg->dev, "vddio = %d, selector = %u\n", uv, selector);
    -
    - return uv;
    -}
    -
    static struct regulator_ops anatop_rops = {
    .set_voltage = anatop_set_voltage,
    .get_voltage_sel = anatop_get_voltage_sel,
    - .list_voltage = anatop_list_voltage,
    + .list_voltage = regulator_list_voltage_linear,
    };

    static int __devinit anatop_regulator_probe(struct platform_device *pdev)
    @@ -178,6 +167,8 @@ static int __devinit anatop_regulator_probe(struct platform_device *pdev)

    rdesc->n_voltages = (sreg->max_voltage - sreg->min_voltage)
    / 25000 + 1;
    + rdesc->min_uV = sreg->min_voltage;
    + rdesc->uV_step = 25000;

    config.dev = &pdev->dev;
    config.init_data = initdata;
    --
    1.7.5.4




    \
     
     \ /
      Last update: 2012-05-14 05:41    [W:0.046 / U:0.012 seconds]
    ©2003-2016 Jasper Spaans. hosted at Digital OceanAdvertise on this site