lkml.org 
[lkml]   [2012]   [Apr]   [30]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    Patch in this message
    /
    From
    Subject[PATCH NEXT]staging: rtl8192u Fix typos.
    Date
    From: "Justin P. Mattock" <justinmattock@gmail.com>

    Signed-off-by: Justin P. Mattock <justinmattock@gmail.com>

    ---

    The below patch fixes some typos that I found while going through staging/rtl8192u

    drivers/staging/rtl8192u/r8180_93cx6.c | 2 +-
    drivers/staging/rtl8192u/r8180_93cx6.h | 2 +-
    drivers/staging/rtl8192u/r8192U.h | 6 +-
    drivers/staging/rtl8192u/r8192U_core.c | 56 ++++++++++++++--------------
    drivers/staging/rtl8192u/r8192U_dm.c | 50 ++++++++++++------------
    drivers/staging/rtl8192u/r8192U_hw.h | 2 +-
    drivers/staging/rtl8192u/r8192U_wx.c | 8 ++--
    drivers/staging/rtl8192u/r8192U_wx.h | 2 +-
    drivers/staging/rtl8192u/r819xU_HTType.h | 2 +-
    drivers/staging/rtl8192u/r819xU_cmdpkt.c | 8 ++--
    drivers/staging/rtl8192u/r819xU_firmware.c | 4 +-
    drivers/staging/rtl8192u/r819xU_phy.c | 16 ++++----
    drivers/staging/rtl8192u/r819xU_phyreg.h | 2 +-
    13 files changed, 80 insertions(+), 80 deletions(-)

    diff --git a/drivers/staging/rtl8192u/r8180_93cx6.c b/drivers/staging/rtl8192u/r8180_93cx6.c
    index 8878cfe..0e8ff75 100644
    --- a/drivers/staging/rtl8192u/r8180_93cx6.c
    +++ b/drivers/staging/rtl8192u/r8180_93cx6.c
    @@ -14,7 +14,7 @@

    Parts of this driver are based on the Intel Pro Wireless 2100 GPL driver.

    - We want to tanks the Authors of those projects and the Ndiswrapper
    + We want to thanks the Authors of those projects and the Ndiswrapper
    project Authors.
    */

    diff --git a/drivers/staging/rtl8192u/r8180_93cx6.h b/drivers/staging/rtl8192u/r8180_93cx6.h
    index fb3ac97..3527d32 100644
    --- a/drivers/staging/rtl8192u/r8180_93cx6.h
    +++ b/drivers/staging/rtl8192u/r8180_93cx6.h
    @@ -7,7 +7,7 @@
    Parts of this driver are based on the rtl8180 driver skeleton from Patric Schenke & Andres Salomon
    Parts of this driver are based on the Intel Pro Wireless 2100 GPL driver

    - We want to tanks the Authors of such projects and the Ndiswrapper project Authors.
    + We want to thanks the Authors of such projects and the Ndiswrapper project Authors.
    */

    /*This files contains card eeprom (93c46 or 93c56) programming routines*/
    diff --git a/drivers/staging/rtl8192u/r8192U.h b/drivers/staging/rtl8192u/r8192U.h
    index 43d459d..adeb724 100644
    --- a/drivers/staging/rtl8192u/r8192U.h
    +++ b/drivers/staging/rtl8192u/r8192U.h
    @@ -11,7 +11,7 @@

    Parts of this driver are based on the Intel Pro Wireless 2100 GPL driver

    - We want to tanks the Authors of those projects and the Ndiswrapper
    + We want to thanks the Authors of those projects and the Ndiswrapper
    project Authors.
    */

    @@ -98,7 +98,7 @@ do { if(rt_global_debug_component & component) \
    #define COMP_INIT BIT2 // during driver initialization / halt / reset.


    -#define COMP_RECV BIT3 // Reveive part data path.
    +#define COMP_RECV BIT3 // Revive part data path.
    #define COMP_SEND BIT4 // Send part path.
    #define COMP_IO BIT5 // I/O Related. Added by Annie, 2006-03-02.
    #define COMP_POWER BIT6 // 802.11 Power Save mode or System/Device Power state related.
    @@ -322,7 +322,7 @@ typedef struct _tx_fwinfo_819x_usb {
    u8 TxSubCarrier:2; // This is used for legacy OFDM rate only.
    u8 STBC:2;
    u8 AllowAggregation:1;
    - u8 RtsHT:1; //Interpre RtsRate field as high throughput data rate
    + u8 RtsHT:1; //Interprete RtsRate field as high throughput data rate
    u8 RtsShort:1; //Short PLCP for CCK, or short GI for 11n MCS
    u8 RtsBandwidth:1; // This is used for HT MCS rate only.
    u8 RtsSubcarrier:2; // This is used for legacy OFDM rate only.
    diff --git a/drivers/staging/rtl8192u/r8192U_core.c b/drivers/staging/rtl8192u/r8192U_core.c
    index 9c00865..be86045 100644
    --- a/drivers/staging/rtl8192u/r8192U_core.c
    +++ b/drivers/staging/rtl8192u/r8192U_core.c
    @@ -203,7 +203,7 @@ static void rtl819x_set_channel_map(u8 channel_plan, struct r8192_priv* priv)
    {
    Dot11d_Init(ieee);
    ieee->bGlobalDomain = false;
    - //acturally 8225 & 8256 rf chip only support B,G,24N mode
    + //actually 8225 & 8256 rf chip only support B,G,24N mode
    if ((priv->rf_chip == RF_8225) || (priv->rf_chip == RF_8256))
    {
    min_chan = 1;
    @@ -1103,7 +1103,7 @@ inline u16 rtl8192_rate2rate(short rate)
    }


    -/* The protype of rx_isr has changed since one verion of Linux Kernel */
    +/* The prototype of rx_isr has changed since one version of Linux Kernel */
    static void rtl8192_rx_isr(struct urb *urb)
    {
    struct sk_buff *skb = (struct sk_buff *) urb->context;
    @@ -1476,7 +1476,7 @@ static void rtl8192_tx_isr(struct urb *tx_urb)
    if(tcb_desc->queue_index != TXCMD_QUEUE) {
    if(tx_urb->status == 0) {
    dev->trans_start = jiffies;
    - // As act as station mode, destion shall be unicast address.
    + // As act as station mode, destination shall be unicast address.
    //priv->ieee80211->stats.tx_bytes+=(skb->len - priv->ieee80211->tx_headroom);
    //priv->ieee80211->stats.tx_packets++;
    priv->stats.txoktotal++;
    @@ -1522,13 +1522,13 @@ static void rtl8192_tx_isr(struct urb *tx_urb)
    else if ((skb_queue_len(&priv->ieee80211->skb_drv_aggQ[queue_index])!= 0)&&\
    (!(priv->ieee80211->queue_stop))) {
    // Tx Driver Aggregation process
    - /* The driver will aggregation the packets according to the following stets
    + /* The driver will aggregation the packets according to the following stats
    * 1. check whether there's tx irq available, for it's a completion return
    * function, it should contain enough tx irq;
    - * 2. check pakcet type;
    + * 2. check packet type;
    * 3. initialize sendlist, check whether the to-be send packet no greater than 1
    - * 4. aggregation the packets, and fill firmware info and tx desc to it, etc.
    - * 5. check whehter the packet could be sent, otherwise just insert to wait head
    + * 4. aggregates the packets, and fill firmware info and tx desc to it, etc.
    + * 5. check whether the packet could be sent, otherwise just insert to wait head
    * */
    skb = skb_dequeue(&priv->ieee80211->skb_drv_aggQ[queue_index]);
    if(!check_nic_enough_desc(dev, queue_index)) {
    @@ -2447,7 +2447,7 @@ static int rtl8192_qos_handle_probe_response(struct r8192_priv *priv,
    return 0;
    }

    -/* handle manage frame frame beacon and probe response */
    +/* handle and manage frame from beacon and probe response */
    static int rtl8192_handle_beacon(struct net_device * dev,
    struct ieee80211_beacon * beacon,
    struct ieee80211_network * network)
    @@ -2625,7 +2625,7 @@ bool GetHalfNmodeSupportByAPs819xUsb(struct net_device* dev)
    void rtl8192_refresh_supportrate(struct r8192_priv* priv)
    {
    struct ieee80211_device* ieee = priv->ieee80211;
    - //we donot consider set support rate for ABG mode, only HT MCS rate is set here.
    + //we do not consider set support rate for ABG mode, only HT MCS rate is set here.
    if (ieee->mode == WIRELESS_MODE_N_24G || ieee->mode == WIRELESS_MODE_N_5G)
    {
    memcpy(ieee->Regdot11HTOperationalRateSet, ieee->RegHTSuppRateSet, 16);
    @@ -2780,10 +2780,10 @@ static void rtl8192_init_priv_variable(struct net_device* dev)
    priv->TransmitConfig =
    // TCR_DurProcMode | //for RTL8185B, duration setting by HW
    //? TCR_DISReqQsize |
    - (TCR_MXDMA_2048<<TCR_MXDMA_OFFSET)| // Max DMA Burst Size per Tx DMA Burst, 7: reservied.
    + (TCR_MXDMA_2048<<TCR_MXDMA_OFFSET)| // Max DMA Burst Size per Tx DMA Burst, 7: reserved.
    (priv->ShortRetryLimit<<TCR_SRL_OFFSET)| // Short retry limit
    (priv->LongRetryLimit<<TCR_LRL_OFFSET) | // Long retry limit
    - (false ? TCR_SAT: 0); // FALSE: HW provies PLCP length and LENGEXT, TURE: SW proiveds them
    + (false ? TCR_SAT: 0); // FALSE: HW provides PLCP length and LENGEXT, TURE: SW provides them
    #ifdef TO_DO_LIST
    if(Adapter->bInHctTest)
    pHalData->ReceiveConfig = pHalData->CSMethod |
    @@ -3437,7 +3437,7 @@ if(Adapter->ResetProgress == RESET_TYPE_NORESET)
    { // User disable RF via registry.
    RT_TRACE((COMP_INIT|COMP_RF), DBG_LOUD, ("InitializeAdapter819xUsb(): Turn off RF for RegRfOff ----------\n"));
    MgntActSet_RF_State(Adapter, eRfOff, RF_CHANGE_BY_SW);
    - // Those action will be discard in MgntActSet_RF_State because off the same state
    + // Those action will be discard in MgntActSet_RF_State because of the same state
    for(eRFPath = 0; eRFPath <pHalData->NumTotalRFPath; eRFPath++)
    PHY_SetRFReg(Adapter, (RF90_RADIO_PATH_E)eRFPath, 0x4, 0xC00, 0x0);
    }
    @@ -3458,7 +3458,7 @@ if(Adapter->ResetProgress == RESET_TYPE_NORESET)
    if(pHalData->eRFPowerState == eRfOff)
    {
    MgntActSet_RF_State(Adapter, eRfOff, pMgntInfo->RfOffReason);
    - // Those action will be discard in MgntActSet_RF_State because off the same state
    + // Those action will be discard in MgntActSet_RF_State because of the same state
    for(eRFPath = 0; eRFPath <pHalData->NumTotalRFPath; eRFPath++)
    PHY_SetRFReg(Adapter, (RF90_RADIO_PATH_E)eRFPath, 0x4, 0xC00, 0x0);
    }
    @@ -3586,7 +3586,7 @@ TxCheckStuck(struct net_device *dev)
    //unsigned long flags;

    //
    - // Decide Stuch threshold according to current power save mode
    + // Decide such threshold according to current power save mode
    //

    // RT_TRACE(COMP_RESET, " ==> TxCheckStuck()\n");
    @@ -3745,7 +3745,7 @@ rtl819x_ifcheck_resetornot(struct net_device *dev)

    // Driver should not check RX stuck in IBSS mode because it is required to
    // set Check BSSID in order to send beacon, however, if check BSSID is
    - // set, STA cannot hear any packet a all. Emily, 2008.04.12
    + // set, STA cannot hear any packet at all. Emily, 2008.04.12
    RxResetType = RxCheckStuck(dev);
    }
    if(TxResetType==RESET_TYPE_NORMAL || RxResetType==RESET_TYPE_NORMAL)
    @@ -3962,7 +3962,7 @@ RESET_START:
    up(&priv->wx_sem);
    RT_TRACE(COMP_RESET,"%s():<==========down process is finished\n",__FUNCTION__);
    //rtl8192_irq_disable(dev);
    - RT_TRACE(COMP_RESET,"%s():===========>start to up the driver\n",__FUNCTION__);
    + RT_TRACE(COMP_RESET,"%s():===========>start up the driver\n",__FUNCTION__);
    reset_status = _rtl8192_up(dev);

    RT_TRACE(COMP_RESET,"%s():<===========up process is finished\n",__FUNCTION__);
    @@ -4155,7 +4155,7 @@ extern void rtl819x_watchdog_wqcallback(struct work_struct *work)
    void watch_dog_timer_callback(unsigned long data)
    {
    struct r8192_priv *priv = ieee80211_priv((struct net_device *) data);
    - //printk("===============>watch_dog timer\n");
    + //printk("===============>watch_dog timer\n");
    queue_delayed_work(priv->priv_wq,&priv->watch_dog_wq, 0);
    mod_timer(&priv->watch_dog_timer, jiffies + MSECS(IEEE80211_WATCH_DOG_TIME));
    }
    @@ -4170,7 +4170,7 @@ int _rtl8192_up(struct net_device *dev)
    init_status = rtl8192_adapter_start(dev);
    if(!init_status)
    {
    - RT_TRACE(COMP_ERR,"ERR!!! %s(): initialization is failed!\n", __FUNCTION__);
    + RT_TRACE(COMP_ERR,"ERR!!! %s(): initialization failed!\n", __FUNCTION__);
    priv->up=priv->ieee80211->ieee_up = 0;
    return -EAGAIN;
    }
    @@ -4256,7 +4256,7 @@ int rtl8192_down(struct net_device *dev)
    skb_queue_purge(&priv->ieee80211->skb_drv_aggQ [i]);
    }

    - //as cancel_delayed_work will del work->timer, so if work is not definedas struct delayed_work, it will corrupt
    + //as cancel_delayed_work will del work->timer, so if work is not defined as struct delayed_work, it will corrupt
    // flush_scheduled_work();
    rtl8192_cancel_deferred_work(priv);
    deinit_hal_dm(dev);
    @@ -4516,7 +4516,7 @@ u8 HwRateToMRate90(bool bIsHT, u8 rate)

    /**
    * Function: UpdateRxPktTimeStamp
    - * Overview: Recored down the TSF time stamp when receiving a packet
    + * Overview: Record down the TSF time stamp when receiving a packet
    *
    * Input:
    * PADAPTER Adapter
    @@ -4556,9 +4556,9 @@ long rtl819x_translate_todbm(u8 signal_strength_index )// 0-100 index.
    }


    -/* 2008/01/22 MH We can not delcare RSSI/EVM total value of sliding window to
    +/* 2008/01/22 MH We can not declare RSSI/EVM total value of sliding window to
    be a local static. Otherwise, it may increase when we return from S3/S4. The
    - value will be kept in memory or disk. We must delcare the value in adapter
    + value will be kept in memory or disk. We must declare the value in adapter
    and it will be reinitialized when return from S3/S4. */
    void rtl8192_process_phyinfo(struct r8192_priv * priv,u8* buffer, struct ieee80211_rx_stats * pprevious_stats, struct ieee80211_rx_stats * pcurrent_stats)
    {
    @@ -5091,7 +5091,7 @@ static void rtl8192_query_rxphystatus(
    tmp_rxevm = pofdm_buf->rxevm_X[i];
    rx_evmX = (char)(tmp_rxevm);

    - // Do not use shift operation like "rx_evmX >>= 1" because the compilor of free build environment
    + // Do not use shift operation like "rx_evmX >>= 1" because the compiler of free build environment
    // fill most significant bit to "zero" when doing shifting operation which may change a negative
    // value to positive one, then the dbm value (which is supposed to be negative) is not correct anymore.
    rx_evmX /= 2; //dbm
    @@ -5171,7 +5171,7 @@ void TranslateRxSignalStuff819xUsb(struct sk_buff *skb,
    type = WLAN_FC_GET_TYPE(fc);
    praddr = hdr->addr1;

    - /* Check if the received packet is acceptabe. */
    + /* Check if the received packet is acceptable. */
    bpacket_match_bssid = ((IEEE80211_FTYPE_CTL != type) &&
    (eqMacAddr(priv->ieee80211->current_network.bssid, (fc & IEEE80211_FCTL_TODS)? hdr->addr1 : (fc & IEEE80211_FCTL_FROMDS )? hdr->addr2 : hdr->addr3))
    && (!pstats->bHwError) && (!pstats->bCRC)&& (!pstats->bICV));
    @@ -5211,7 +5211,7 @@ void TranslateRxSignalStuff819xUsb(struct sk_buff *skb,

    /**
    * Function: UpdateReceivedRateHistogramStatistics
    -* Overview: Recored down the received data rate
    +* Overview: Record down the received data rate
    *
    * Input:
    * struct net_device *dev
    @@ -5401,7 +5401,7 @@ void query_rxdesc_status(struct sk_buff *skb, struct ieee80211_rx_stats *stats,
    }

    #ifdef USB_RX_AGGREGATION_SUPPORT
    - /* for the rx aggregated sub frame, the redundant space truelly contained in the packet */
    + /* for the rx aggregated sub frame, the redundant space truly contained in the packet */
    if(bIsRxAggrSubframe) {
    skb_pull(skb, 8);
    }
    @@ -5480,7 +5480,7 @@ void rtl8192_rx_nomal(struct sk_buff* skb)
    PacketShiftBytes = GetRxPacketShiftBytes819xUsb(&stats, false);
    }
    #endif
    - /* Process the MPDU recevied */
    + /* Process the MPDU received */
    skb_trim(skb, skb->len - 4/*sCrcLng*/);

    rx_pkt_len = skb->len;
    @@ -5538,7 +5538,7 @@ void rtl8192_rx_nomal(struct sk_buff* skb)
    if(PacketLength > agg_skb->len) {
    break;
    }
    - /* Process the MPDU recevied */
    + /* Process the MPDU received */
    skb = dev_alloc_skb(PacketLength);
    memcpy(skb_put(skb,PacketLength),agg_skb->data, PacketLength);
    skb_trim(skb, skb->len - 4/*sCrcLng*/);
    diff --git a/drivers/staging/rtl8192u/r8192U_dm.c b/drivers/staging/rtl8192u/r8192U_dm.c
    index 2dde9fa..3f79e61 100644
    --- a/drivers/staging/rtl8192u/r8192U_dm.c
    +++ b/drivers/staging/rtl8192u/r8192U_dm.c
    @@ -38,7 +38,7 @@ static u32 edca_setting_UL[HT_IOT_PEER_MAX] =
    /*------------------------Define global variable-----------------------------*/
    // Debug variable ?
    dig_t dm_digtable;
    -// Store current shoftware write register content for MAC PHY.
    +// Store current software write register content for MAC PHY.
    u8 dm_shadow[16][256] = {{0}};
    // For Dynamic Rx Path Selection by Signal Strength
    DRxPathSel DM_RxPathSelTable;
    @@ -119,7 +119,7 @@ static void dm_pd_th(struct net_device *dev);
    static void dm_cs_ratio(struct net_device *dev);

    static void dm_init_ctstoself(struct net_device *dev);
    -// DM --> EDCA turboe mode control
    +// DM --> EDCA turbo mode control
    static void dm_check_edca_turbo(struct net_device *dev);

    // DM --> HW RF control
    @@ -348,7 +348,7 @@ extern void init_rate_adaptive(struct net_device * dev)
    *
    * Revised History:
    * When Who Remark
    - * 05/26/08 amy Create version 0 proting from windows code.
    + * 05/26/08 amy Create version 0 porting from windows code.
    *
    *---------------------------------------------------------------------------*/
    static void dm_check_rate_adaptive(struct net_device * dev)
    @@ -543,7 +543,7 @@ static u32 OFDMSwingTable[OFDM_Table_Length] = {
    0x5a400169, // 3, +3db
    0x50800142, // 4, +2db
    0x47c0011f, // 5, +1db
    - 0x40000100, // 6, +0db ===> default, upper for higher temprature, lower for low temprature
    + 0x40000100, // 6, +0db ===> default, upper for higher temperature, lower for low temperature
    0x390000e4, // 7, -1db
    0x32c000cb, // 8, -2db
    0x2d4000b5, // 9, -3db
    @@ -678,7 +678,7 @@ static void dm_TXPowerTrackingCallback_TSSI(struct net_device * dev)
    {
    write_nic_byte(dev, 0x1ba, 0);
    viviflag = FALSE;
    - RT_TRACE(COMP_POWER_TRACKING, "we filted this data\n");
    + RT_TRACE(COMP_POWER_TRACKING, "we filtered the data\n");
    for(k = 0;k < 5; k++)
    tmp_report[k] = 0;
    break;
    @@ -864,14 +864,14 @@ static void dm_TXPowerTrackingCallback_ThermalMeter(struct net_device * dev)
    RT_TRACE(COMP_POWER_TRACKING, "Readback ThermalMeterA = %d \n", tmpRegA);
    if(tmpRegA < 3 || tmpRegA > 13)
    return;
    - if(tmpRegA >= 12) // if over 12, TP will be bad when high temprature
    + if(tmpRegA >= 12) // if over 12, TP will be bad when high temperature
    tmpRegA = 12;
    RT_TRACE(COMP_POWER_TRACKING, "Valid ThermalMeterA = %d \n", tmpRegA);
    priv->ThermalMeter[0] = ThermalMeterVal; //We use fixed value by Bryant's suggestion
    priv->ThermalMeter[1] = ThermalMeterVal; //We use fixed value by Bryant's suggestion

    - //Get current RF-A temprature index
    - if(priv->ThermalMeter[0] >= (u8)tmpRegA) //lower temprature
    + //Get current RF-A temperature index
    + if(priv->ThermalMeter[0] >= (u8)tmpRegA) //lower temperature
    {
    tmpOFDMindex = tmpCCK20Mindex = 6+(priv->ThermalMeter[0]-(u8)tmpRegA);
    tmpCCK40Mindex = tmpCCK20Mindex - 6;
    @@ -885,7 +885,7 @@ static void dm_TXPowerTrackingCallback_ThermalMeter(struct net_device * dev)
    else
    {
    tmpval = ((u8)tmpRegA - priv->ThermalMeter[0]);
    - if(tmpval >= 6) // higher temprature
    + if(tmpval >= 6) // higher temperature
    tmpOFDMindex = tmpCCK20Mindex = 0; // max to +6dB
    else
    tmpOFDMindex = tmpCCK20Mindex = 6 - tmpval;
    @@ -1457,9 +1457,9 @@ static void dm_InitializeTXPowerTracking_ThermalMeter(struct net_device *dev)
    {
    struct r8192_priv *priv = ieee80211_priv(dev);

    - // Tx Power tracking by Theremal Meter require Firmware R/W 3-wire. This mechanism
    + // Tx Power tracking by Thermal Meter require Firmware R/W 3-wire. This mechanism
    // can be enabled only when Firmware R/W 3-wire is enabled. Otherwise, frequent r/w
    - // 3-wire by driver cause RF goes into wrong state.
    + // 3-wire by driver causes RF to go into a wrong state.
    if(priv->ieee80211->FwRWRF)
    priv->btxpower_tracking = TRUE;
    else
    @@ -1520,7 +1520,7 @@ static void dm_CheckTXPowerTracking_ThermalMeter(struct net_device *dev)

    if(!TM_Trigger)
    {
    - //Attention!! You have to wirte all 12bits data to RF, or it may cause RF to crash
    + //Attention!! You have to write all 12bits data to RF, or it may cause RF to crash
    //actually write reg0x02 bit1=0, then bit1=1.
    //DbgPrint("Trigger ThermalMeter, write RF reg0x2 = 0x4d to 0x4f\n");
    rtl8192_phy_SetRFReg(dev, RF90_PATH_A, 0x02, bMask12Bits, 0x4d);
    @@ -1744,7 +1744,7 @@ extern void dm_restore_dynamic_mechanism_state(struct net_device *dev)
    write_nic_dword(dev, RATR0, ratr_value);
    write_nic_byte(dev, UFWP, 1);
    }
    - //Resore TX Power Tracking Index
    + //Restore TX Power Tracking Index
    if(priv->btxpower_trackingInit && priv->btxpower_tracking){
    dm_txpower_reset_recovery(dev);
    }
    @@ -2031,7 +2031,7 @@ static void dm_dig_init(struct net_device *dev)
    dm_digtable.dbg_mode = DM_DBG_OFF; //off=by real rssi value, on=by DM_DigTable.Rssi_val for new dig
    dm_digtable.dig_algorithm_switch = 0;

    - /* 2007/10/04 MH Define init gain threshol. */
    + /* 2007/10/04 MH Define init gain threshold. */
    dm_digtable.dig_state = DM_STA_DIG_MAX;
    dm_digtable.dig_highpwr_state = DM_STA_DIG_MAX;
    dm_digtable.initialgain_lowerbound_state = false;
    @@ -2097,7 +2097,7 @@ static void dm_ctrl_initgain_byrssi_by_driverrssi(
    return;

    //DbgPrint("Dig by Sw Rssi \n");
    - if(dm_digtable.dig_algorithm_switch) // if swithed algorithm, we have to disable FW Dig.
    + if(dm_digtable.dig_algorithm_switch) // if switched algorithm, we have to disable FW Dig.
    fw_dig = 0;
    if(fw_dig <= 3) // execute several times to make sure the FW Dig is disabled
    {// FW DIG Off
    @@ -2160,7 +2160,7 @@ static void dm_ctrl_initgain_byrssi_by_fwfalse_alarm(
    /*DbgPrint("DIG Check\n\r RSSI=%d LOW=%d HIGH=%d STATE=%d",
    pHalData->UndecoratedSmoothedPWDB, DM_DigTable.RssiLowThresh,
    DM_DigTable.RssiHighThresh, DM_DigTable.Dig_State);*/
    - /* 1. When RSSI decrease, We have to judge if it is smaller than a treshold
    + /* 1. When RSSI decrease, We have to judge if it is smaller than a threshold
    and then execute below step. */
    if ((priv->undecorated_smoothed_pwdb <= dm_digtable.rssi_low_thresh))
    {
    @@ -2220,7 +2220,7 @@ static void dm_ctrl_initgain_byrssi_by_fwfalse_alarm(

    }

    - /* 2. When RSSI increase, We have to judge if it is larger than a treshold
    + /* 2. When RSSI increase, We have to judge if it is larger than a threshold
    and then execute below step. */
    if ((priv->undecorated_smoothed_pwdb >= dm_digtable.rssi_high_thresh) )
    {
    @@ -2329,7 +2329,7 @@ static void dm_ctrl_initgain_byrssi_highpwr(
    }

    /* 3. When RSSI >75% or <70%, it is a high power issue. We have to judge if
    - it is larger than a treshold and then execute below step. */
    + it is larger than a threshold and then execute below step. */
    // 2008/02/05 MH SD3-Jerry Modify PD_TH for high power issue.
    if (priv->undecorated_smoothed_pwdb >= dm_digtable.rssi_high_power_highthresh)
    {
    @@ -2841,8 +2841,8 @@ static void dm_check_rfctrl_gpio(struct net_device * dev)
    {
    //struct r8192_priv *priv = ieee80211_priv(dev);

    - // Walk around for DTM test, we will not enable HW - radio on/off because r/w
    - // page 1 register before Lextra bus is enabled cause system fails when resuming
    + // Work around for DTM test, we will not enable HW - radio on/off because r/w
    + // page 1 register before extra bus is enabled causing system fails when resuming
    // from S4. 20080218, Emily

    // Stop to execute workitem to prevent S3/S4 bug.
    @@ -3377,13 +3377,13 @@ extern void dm_fsync_timer_callback(unsigned long data)
    {

    u32 DiffNum = priv->rateCountDiffRecord - rate_count_diff;
    - // Contiune count
    + // Continue count
    if(DiffNum >= priv->ieee80211->fsync_seconddiff_ratethreshold)
    priv->ContiuneDiffCount++;
    else
    priv->ContiuneDiffCount = 0;

    - // Contiune count over
    + // Continue count over
    if(priv->ContiuneDiffCount >=2)
    {
    bSwitchFromCountDiff = true;
    @@ -3392,7 +3392,7 @@ extern void dm_fsync_timer_callback(unsigned long data)
    }
    else
    {
    - // Stop contiune count
    + // Stop continue count
    priv->ContiuneDiffCount = 0;
    }

    @@ -3523,7 +3523,7 @@ static void dm_StartSWFsync(struct net_device *dev)
    RT_TRACE(COMP_HALDM,"%s\n", __FUNCTION__);
    // Initial rate record to zero, start to record.
    priv->rate_record = 0;
    - // Initial contiune diff count to zero, start to record.
    + // Initial continue diff count to zero, start to record.
    priv->ContiuneDiffCount = 0;
    priv->rateCountDiffRecord = 0;
    priv->bswitch_fsync = false;
    @@ -3875,7 +3875,7 @@ static void dm_send_rssi_tofw(struct net_device *dev)

    // If we test chariot, we should stop the TX command ?
    // Because 92E will always silent reset when we send tx command. We use register
    - // 0x1e0(byte) to botify driver.
    + // 0x1e0(byte) to notify driver.
    write_nic_byte(dev, DRIVER_RSSI, (u8)priv->undecorated_smoothed_pwdb);
    return;
    tx_cmd.Op = TXCMD_SET_RX_RSSI;
    diff --git a/drivers/staging/rtl8192u/r8192U_hw.h b/drivers/staging/rtl8192u/r8192U_hw.h
    index e89aaf7..b0ee4dd 100644
    --- a/drivers/staging/rtl8192u/r8192U_hw.h
    +++ b/drivers/staging/rtl8192u/r8192U_hw.h
    @@ -10,7 +10,7 @@
    Parts of this driver are based on the Intel Pro Wireless
    2100 GPL driver.

    - We want to tanks the Authors of those projects
    + We want to thanks the Authors of those projects
    and the Ndiswrapper project Authors.
    */

    diff --git a/drivers/staging/rtl8192u/r8192U_wx.c b/drivers/staging/rtl8192u/r8192U_wx.c
    index 981de9b..2ce0fc8 100644
    --- a/drivers/staging/rtl8192u/r8192U_wx.c
    +++ b/drivers/staging/rtl8192u/r8192U_wx.c
    @@ -13,7 +13,7 @@

    Parts of this driver are based on the Intel Pro Wireless 2100 GPL driver.

    - We want to tanks the Authors of those projects and the Ndiswrapper
    + We want to thanks the Authors of those projects and the Ndiswrapper
    project Authors.
    */

    @@ -256,7 +256,7 @@ static int r8192_wx_get_ap_status(struct net_device *dev,
    //count the length of input ssid
    for(name_len=0 ; ((char*)wrqu->data.pointer)[name_len]!='\0' ; name_len++);

    - //search for the correspoding info which is received
    + //search for the corresponding info which is received
    list_for_each_entry(target, &ieee->network_list, list) {
    if ( (target->ssid_len == name_len) &&
    (strncmp(target->ssid, (char*)wrqu->data.pointer, name_len)==0)){
    @@ -419,7 +419,7 @@ static int rtl8180_wx_get_range(struct net_device *dev,
    range->max_qual.updated = 7; /* Updated all three */

    range->avg_qual.qual = 92; /* > 8% missed beacons is 'bad' */
    - /* TODO: Find real 'good' to 'bad' threshol value for RSSI */
    + /* TODO: Find real 'good' to 'bad' threshold value for RSSI */
    range->avg_qual.level = 20 + -98;
    range->avg_qual.noise = 0;
    range->avg_qual.updated = 7; /* Updated all three */
    @@ -1047,7 +1047,7 @@ static iw_handler r8192_wx_handlers[] =
    #else
    NULL,
    #endif
    - dummy, /* SIOCGIWAPLIST -- depricated */
    + dummy, /* SIOCGIWAPLIST -- deprecated */
    r8192_wx_set_scan, /* SIOCSIWSCAN */
    r8192_wx_get_scan, /* SIOCGIWSCAN */
    r8192_wx_set_essid, /* SIOCSIWESSID */
    diff --git a/drivers/staging/rtl8192u/r8192U_wx.h b/drivers/staging/rtl8192u/r8192U_wx.h
    index f4cf280..1388664 100644
    --- a/drivers/staging/rtl8192u/r8192U_wx.h
    +++ b/drivers/staging/rtl8192u/r8192U_wx.h
    @@ -7,7 +7,7 @@
    Parts of this driver are based on the rtl8180 driver skeleton from Patric Schenke & Andres Salomon
    Parts of this driver are based on the Intel Pro Wireless 2100 GPL driver

    - We want to tanks the Authors of such projects and the Ndiswrapper project Authors.
    + We want to thanks the Authors of such projects and the Ndiswrapper project Authors.
    */

    /* this file (will) contains wireless extension handlers*/
    diff --git a/drivers/staging/rtl8192u/r819xU_HTType.h b/drivers/staging/rtl8192u/r819xU_HTType.h
    index 2ac4216..e07f8b1 100644
    --- a/drivers/staging/rtl8192u/r819xU_HTType.h
    +++ b/drivers/staging/rtl8192u/r819xU_HTType.h
    @@ -211,7 +211,7 @@ typedef struct _RT_HIGH_THROUGHPUT{
    u8 bEnableHT;
    u8 bCurrentHTSupport;

    - u8 bRegBW40MHz; // Tx 40MHz channel capablity
    + u8 bRegBW40MHz; // Tx 40MHz channel capability
    u8 bCurBW40MHz; // Tx 40MHz channel capability

    u8 bRegShortGI40MHz; // Tx Short GI for 40Mhz
    diff --git a/drivers/staging/rtl8192u/r819xU_cmdpkt.c b/drivers/staging/rtl8192u/r819xU_cmdpkt.c
    index 9348f42..ec1eeb7 100644
    --- a/drivers/staging/rtl8192u/r819xU_cmdpkt.c
    +++ b/drivers/staging/rtl8192u/r819xU_cmdpkt.c
    @@ -157,7 +157,7 @@ SendTxCommandPacket(
    seg_ptr = skb_put(skb, buffer_len);
    /*
    * Transform from little endian to big endian
    - * and pending zero
    + * and pending zero
    */
    memcpy(seg_ptr,codevirtualaddress,buffer_len);
    tcb_desc->txbuf_size= (u16)buffer_len;
    @@ -718,15 +718,15 @@ cmpk_message_handle_rx(
    /* 2. Read virtual address from RFD. */
    pcmd_buff = pstats->virtual_address;

    - /* 3. Read command pakcet element id and length. */
    + /* 3. Read command packet element id and length. */
    element_id = pcmd_buff[0];
    /*RT_TRACE(COMP_SEND, DebugLevel,
    ("\n\r[CMPK]-->element ID=%d Len=%d", element_id, total_length));*/

    - /* 4. Check every received command packet conent according to different
    + /* 4. Check every received command packet content according to different
    element type. Because FW may aggregate RX command packet to minimize
    transmit time between DRV and FW.*/
    - // Add a counter to prevent to locked in the loop too long
    + // Add a counter to prevent the lock in the loop to be to long
    while (total_length > 0 || exe_cnt++ >100)
    {
    /* 2007/01/17 MH We support aggregation of different cmd in the same packet. */
    diff --git a/drivers/staging/rtl8192u/r819xU_firmware.c b/drivers/staging/rtl8192u/r819xU_firmware.c
    index 4bb5fff..fe5776d 100644
    --- a/drivers/staging/rtl8192u/r819xU_firmware.c
    +++ b/drivers/staging/rtl8192u/r819xU_firmware.c
    @@ -275,11 +275,11 @@ bool init_firmware(struct net_device *dev)

    /*
    * Download boot, main, and data image for System reset.
    - * Download data image for firmware reseta
    + * Download data image for firmware reset
    */
    for(init_step = starting_state; init_step <= FW_INIT_STEP2_DATA; init_step++) {
    /*
    - * Open Image file, and map file to contineous memory if open file success.
    + * Open Image file, and map file to continuous memory if open file success.
    * or read image file from array. Default load from IMG file
    */
    if(rst_opt == OPT_SYSTEM_RESET) {
    diff --git a/drivers/staging/rtl8192u/r819xU_phy.c b/drivers/staging/rtl8192u/r819xU_phy.c
    index c4586b0..636d6fd 100644
    --- a/drivers/staging/rtl8192u/r819xU_phy.c
    +++ b/drivers/staging/rtl8192u/r819xU_phy.c
    @@ -40,7 +40,7 @@ static u32 RF_CHANNEL_TABLE_ZEBRA[] = {
    * and do register read/write
    * input: u32 dwBitMask //taget bit pos in the addr to be modified
    * output: none
    - * return: u32 return the shift bit bit position of the mask
    + * return: u32 return the shift bit position of the mask
    * ****************************************************************************/
    u32 rtl8192_CalculateBitShift(u32 dwBitMask)
    {
    @@ -176,7 +176,7 @@ u32 rtl8192_phy_RFSerialRead(struct net_device* dev, RF90_RADIO_PATH_E eRFPath,
    rtl8192_setBBreg(dev, pPhyReg->rfHSSIPara2, bLSSIReadEdge, 0x1);


    - // TODO: we should not delay such a long time. Ask help from SD3
    + // TODO: we should not delay such a long time. Ask help from SD3
    msleep(1);

    ret = rtl8192_QueryBBReg(dev, pPhyReg->rfLSSIReadBack, bLSSIReadBackData);
    @@ -252,7 +252,7 @@ void rtl8192_phy_RFSerialWrite(struct net_device* dev, RF90_RADIO_PATH_E eRFPath
    NewOffset = Offset;
    }

    - // Put write addr in [5:0] and write data in [31:16]
    + // Put write addr in [5:0] and write data in [31:16]
    DataAndAddr = (Data<<16) | (NewOffset&0x3f);

    // Write Operation
    @@ -525,7 +525,7 @@ void rtl8192_phy_configmac(struct net_device* dev)
    }

    /******************************************************************************
    - *function: This function do dirty work
    + *function: This function does dirty work
    * input: dev
    * output: none
    * return: none
    @@ -578,7 +578,7 @@ void rtl8192_phyConfigBB(struct net_device* dev, u8 ConfigType)
    void rtl8192_InitBBRFRegDef(struct net_device* dev)
    {
    struct r8192_priv *priv = ieee80211_priv(dev);
    -// RF Interface Sowrtware Control
    +// RF Interface Software Control
    priv->PHYRegDef[RF90_PATH_A].rfintfs = rFPGA0_XAB_RFInterfaceSW; // 16 LSBs if read 32-bit from 0x870
    priv->PHYRegDef[RF90_PATH_B].rfintfs = rFPGA0_XAB_RFInterfaceSW; // 16 MSBs if read 32-bit from 0x870 (16-bit for 0x872)
    priv->PHYRegDef[RF90_PATH_C].rfintfs = rFPGA0_XCD_RFInterfaceSW;// 16 LSBs if read 32-bit from 0x874
    @@ -602,7 +602,7 @@ void rtl8192_InitBBRFRegDef(struct net_device* dev)
    priv->PHYRegDef[RF90_PATH_C].rfintfe = rFPGA0_XC_RFInterfaceOE;// 16 MSBs if read 32-bit from 0x86A (16-bit for 0x86A)
    priv->PHYRegDef[RF90_PATH_D].rfintfe = rFPGA0_XD_RFInterfaceOE;// 16 MSBs if read 32-bit from 0x86C (16-bit for 0x86E)

    - //Addr of LSSI. Wirte RF register by driver
    + //Addr of LSSI. Write RF register by driver
    priv->PHYRegDef[RF90_PATH_A].rf3wireOffset = rFPGA0_XA_LSSIParameter; //LSSI Parameter
    priv->PHYRegDef[RF90_PATH_B].rf3wireOffset = rFPGA0_XB_LSSIParameter;
    priv->PHYRegDef[RF90_PATH_C].rf3wireOffset = rFPGA0_XC_LSSIParameter;
    @@ -1384,7 +1384,7 @@ u8 rtl8192_phy_SwChnlStepByStep(struct net_device *dev, u8 channel, u8* stage, u
    }

    /******************************************************************************
    - *function: This function does acturally set channel work
    + *function: This function does actually set channel work
    * input: struct net_device *dev
    * u8 channel
    * output: none
    @@ -1425,7 +1425,7 @@ void rtl8192_SwChnl_WorkItem(struct net_device *dev)
    }

    /******************************************************************************
    - *function: This function scheduled actural workitem to set channel
    + *function: This function scheduled actual workitem to set channel
    * input: net_device dev
    * u8 channel //channel to set
    * output: none
    diff --git a/drivers/staging/rtl8192u/r819xU_phyreg.h b/drivers/staging/rtl8192u/r819xU_phyreg.h
    index 06b0b53..50f24dc 100644
    --- a/drivers/staging/rtl8192u/r819xU_phyreg.h
    +++ b/drivers/staging/rtl8192u/r819xU_phyreg.h
    @@ -443,7 +443,7 @@
    #define bCCKRxIG 0x7f00
    #define bCCKLNAPolarity 0x800000
    #define bCCKRx1stGain 0x7f0000
    -#define bCCKRFExtend 0x20000000 //CCK Rx Iinital gain polarity
    +#define bCCKRFExtend 0x20000000 //CCK Rx inital gain polarity
    #define bCCKRxAGCSatLevel 0x1f000000
    #define bCCKRxAGCSatCount 0xe0
    #define bCCKRxRFSettle 0x1f //AGCsamp_dly
    --
    1.7.5.4


    \
     
     \ /
      Last update: 2012-04-30 17:21    [W:0.072 / U:30.164 seconds]
    ©2003-2016 Jasper Spaans. hosted at Digital OceanAdvertise on this site