Messages in this thread | | | Date | Tue, 3 Apr 2012 10:18:46 -0700 (PDT) | From | Christian Kujau <> | Subject | Re: 3.4.0-rc1: No init found |
| |
On Tue, 3 Apr 2012 at 18:08, Benjamin Herrenschmidt wrote: > I have observed this randomly on the G5 ... sometimes, if I try again, > it works... it's very very odd. There is some kind of race maybe with > async startup ? Or a problem with the vfs path walking ? It's certainly > not easily reproducable for me, it goes away from one boot to the next.
It's 100% reproducible for me. This PowerBook G4 (1.25Ghz) is not the fastes though, maybe a race triggers more easily here...?
> > PS: Unfortunately I cannot boot into the old (3.3-rc7) kernel > > right now (which is still installed via "yaboot" and present in > > /boot), because of this: > > http://nerdbynature.de/bits/3.4.0-rc1/init/mac-invalid-memory.JPG > > Booting into Debian's "squeeze" kernel (2.6.32) which resides in > > the same /boot directory succeeds. > > Hrm, did it used to boot ?
I'm using the "backup" kernel only when the new one has an issue, so I have not tested it for a while, but it used to work, for sure.
> Can you do printenv in OF and tell me what > your load-base, real-base, virt-base etc... are ?
load-base is 0x800000, real-base and virt-base is set to "-1", please see http://nerdbynature.de/bits/3.4.0-rc1/init/printenv-1.JPG
Not sure if this is related, but at the end of each kernel compilation, the following messages are printed:
------------ SYSMAP System.map SYSMAP .tmp_System.map WRAP arch/powerpc/boot/zImage.pmac INFO: Uncompressed kernel (size 0x6e52f8) overlaps the address of the wrapper(0x400000) INFO: Fixing the link_address of wrapper to (0x700000) WRAP arch/powerpc/boot/zImage.coff INFO: Uncompressed kernel (size 0x6e52f8) overlaps the address of the wrapper(0x500000) INFO: Fixing the link_address of wrapper to (0x700000) WRAP arch/powerpc/boot/zImage.miboot INFO: Uncompressed kernel (size 0x6d4b80) overlaps the address of the wrapper(0x400000) INFO: Fixing the link_address of wrapper to (0x700000) Building modules, stage 2. MODPOST 24 modules ------------
I started to see these messages in January (around Linux 3.2.0), but never investigated what it was since the produced kernels continued to boot just fine.
> Might also be worth updating yaboot, debian should have 1.3.16 nowadays.
Debian/stable still has 1.3.13a, I'll try to install 1.3.16 from Debian/testing.
Thanks for your help, Christian. -- BOFH excuse #217:
The MGs ran out of gas.
| |