lkml.org 
[lkml]   [2012]   [Apr]   [26]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    Patch in this message
    /
    From
    Subject[PATCH 07/10] atl1c: remove PHY reset/init for link down event
    Date
    it's unnecessary to reset/init phy when link down.
    Only L1/L2 chip (supported by atlx) need such action.

    Signed-off-by: xiong <xiong@qca.qualcomm.com>
    Tested-by: Liu David <dwliu@qca.qualcomm.com>
    ---
    drivers/net/ethernet/atheros/atl1c/atl1c_main.c | 2 --
    1 files changed, 0 insertions(+), 2 deletions(-)

    diff --git a/drivers/net/ethernet/atheros/atl1c/atl1c_main.c b/drivers/net/ethernet/atheros/atl1c/atl1c_main.c
    index 995da22..cb3b3c4 100644
    --- a/drivers/net/ethernet/atheros/atl1c/atl1c_main.c
    +++ b/drivers/net/ethernet/atheros/atl1c/atl1c_main.c
    @@ -270,8 +270,6 @@ static void atl1c_check_link_status(struct atl1c_adapter *adapter)
    atl1c_set_aspm(hw, SPEED_0);
    netif_carrier_off(netdev);
    netif_stop_queue(netdev);
    - atl1c_phy_reset(hw);
    - atl1c_phy_init(&adapter->hw);
    } else {
    /* Link Up */
    hw->hibernate = false;
    --
    1.7.7


    \
     
     \ /
      Last update: 2012-04-26 08:33    [W:0.022 / U:2.376 seconds]
    ©2003-2016 Jasper Spaans. hosted at Digital OceanAdvertise on this site