lkml.org 
[lkml]   [2012]   [Apr]   [26]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[PATCH 00/10] atl1c: update hardware settings - v3
Date
This update contains a serial of patches, most of them are hardware
settings related. register definitions are refined (or removed if
meaningless) for each patch.

This is the third serial patches, after reviewed/applied the fourth
serial will be out.

The patches have addressed all sparse and checkpatch warnings.

Following NICs are tested:
AR8131/AR8132/AR8151A/AR8152A/AR8152B
Test item includes:
build/install/uninstall/dhcp/ping/iperf/wol/reboot/etc.

xiong (10):
atl1c: remove REG_PHY_STATUS
atl1c: refine phy-register read/write function
atl1c: remove PHY contrl in atl1c_reset_pcie
atl1c: refine SERDES-clock related code
atl1c: remove PHY polling from atl1c_open
atl1c: update PHY reset related routine
atl1c: remove PHY reset/init for link down event
atl1c: add function atl1c_power_saving
atl1c: refine start/enable code for MAC module
atl1c: add flag of PCI_DEV_FLAGS_MSI_INTX_DISABLE_BUG

drivers/net/ethernet/atheros/atl1c/atl1c_ethtool.c | 2 +-
drivers/net/ethernet/atheros/atl1c/atl1c_hw.c | 428 ++++++++++++-----
drivers/net/ethernet/atheros/atl1c/atl1c_hw.h | 501 +++++++++++++-------
drivers/net/ethernet/atheros/atl1c/atl1c_main.c | 240 +++-------
4 files changed, 700 insertions(+), 471 deletions(-)
--
1.7.7



\
 
 \ /
  Last update: 2012-04-26 08:29    [from the cache]
©2003-2011 Jasper Spaans