lkml.org 
[lkml]   [2012]   [Apr]   [20]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2 3/3] ARM: imx6q: switch to use pinctrl driver
Date
From: Dong Aisheng <dong.aisheng@linaro.org>

Signed-off-by: Dong Aisheng <dong.aisheng@linaro.org>

---
This is not a formal patch and is only used for test
since before the pinctrl core handle dummy state is in,
enable pinctrl in driver will break other platforms.

ChangeLog v1->v2:
* using updated binding
---
arch/arm/boot/dts/imx6q-arm2.dts | 2 ++
arch/arm/boot/dts/imx6q.dtsi | 17 +++++++++++++++++
arch/arm/mach-imx/Kconfig | 2 ++
drivers/mmc/host/sdhci-esdhc-imx.c | 12 ++++++++++++
4 files changed, 33 insertions(+), 0 deletions(-)

diff --git a/arch/arm/boot/dts/imx6q-arm2.dts b/arch/arm/boot/dts/imx6q-arm2.dts
index ce1c823..68b1d8d 100644
--- a/arch/arm/boot/dts/imx6q-arm2.dts
+++ b/arch/arm/boot/dts/imx6q-arm2.dts
@@ -44,6 +44,8 @@
fsl,card-wired;
vmmc-supply = <&reg_3p3v>;
status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usdhc4_1>;
};

uart4: uart@021f0000 {
diff --git a/arch/arm/boot/dts/imx6q.dtsi b/arch/arm/boot/dts/imx6q.dtsi
index 4905f51..8cbd88b 100644
--- a/arch/arm/boot/dts/imx6q.dtsi
+++ b/arch/arm/boot/dts/imx6q.dtsi
@@ -386,7 +386,24 @@
};

iomuxc@020e0000 {
+ compatible = "fsl,imx6q-iomuxc";
reg = <0x020e0000 0x4000>;
+
+ /* shared pinctrl settings */
+ usdhc4 {
+ pinctrl_usdhc4_1: usdhc4grp-1 {
+ fsl,pins = <1386 0x17059 /* MX6Q_PAD_SD4_CMD__USDHC4_CMD */
+ 1392 0x17059 /* MX6Q_PAD_SD4_CLK__USDHC4_CLK */
+ 1462 0x17059 /* MX6Q_PAD_SD4_DAT0__USDHC4_DAT0 */
+ 1470 0x17059 /* MX6Q_PAD_SD4_DAT1__USDHC4_DAT1 */
+ 1478 0x17059 /* MX6Q_PAD_SD4_DAT2__USDHC4_DAT2 */
+ 1486 0x17059 /* MX6Q_PAD_SD4_DAT3__USDHC4_DAT3 */
+ 1493 0x17059 /* MX6Q_PAD_SD4_DAT4__USDHC4_DAT4 */
+ 1501 0x17059 /* MX6Q_PAD_SD4_DAT5__USDHC4_DAT5 */
+ 1509 0x17059 /* MX6Q_PAD_SD4_DAT6__USDHC4_DAT6 */
+ 1517 0x17059>; /* MX6Q_PAD_SD4_DAT7__USDHC4_DAT7 */
+ };
+ };
};

dcic@020e4000 { /* DCIC1 */
diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig
index 7561eca..e0fc67c 100644
--- a/arch/arm/mach-imx/Kconfig
+++ b/arch/arm/mach-imx/Kconfig
@@ -842,6 +842,8 @@ config SOC_IMX6Q
select HAVE_IMX_MMDC
select HAVE_IMX_SRC
select HAVE_SMP
+ select PINCTRL
+ select PINCTRL_IMX6Q
select USE_OF

help
diff --git a/drivers/mmc/host/sdhci-esdhc-imx.c b/drivers/mmc/host/sdhci-esdhc-imx.c
index 6193a0d..84ef749 100644
--- a/drivers/mmc/host/sdhci-esdhc-imx.c
+++ b/drivers/mmc/host/sdhci-esdhc-imx.c
@@ -24,6 +24,7 @@
#include <linux/of.h>
#include <linux/of_device.h>
#include <linux/of_gpio.h>
+#include <linux/pinctrl/consumer.h>
#include <mach/esdhc.h>
#include "sdhci-pltfm.h"
#include "sdhci-esdhc.h"
@@ -68,6 +69,7 @@ struct pltfm_imx_data {
int flags;
u32 scratchpad;
enum imx_esdhc_type devtype;
+ struct pinctrl *p;
struct esdhc_platform_data boarddata;
};

@@ -467,6 +469,12 @@ static int __devinit sdhci_esdhc_imx_probe(struct platform_device *pdev)
clk_prepare_enable(clk);
pltfm_host->clk = clk;

+ imx_data->p = pinctrl_get_select_default(&pdev->dev);
+ if (IS_ERR(imx_data->p)) {
+ err = PTR_ERR(imx_data->p);
+ goto pin_err;
+ }
+
if (!is_imx25_esdhc(imx_data))
host->quirks |= SDHCI_QUIRK_BROKEN_TIMEOUT_VAL;

@@ -559,6 +567,8 @@ no_card_detect_irq:
gpio_free(boarddata->wp_gpio);
no_card_detect_pin:
no_board_data:
+ pinctrl_put(imx_data->p);
+pin_err:
clk_disable_unprepare(pltfm_host->clk);
clk_put(pltfm_host->clk);
err_clk_get:
@@ -586,6 +596,8 @@ static int __devexit sdhci_esdhc_imx_remove(struct platform_device *pdev)
gpio_free(boarddata->cd_gpio);
}

+ pinctrl_put(imx_data->p);
+
clk_disable_unprepare(pltfm_host->clk);
clk_put(pltfm_host->clk);
kfree(imx_data);
--
1.7.0.4



\
 
 \ /
  Last update: 2012-04-20 16:53    [W:0.089 / U:0.080 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site