lkml.org 
[lkml]   [2012]   [Apr]   [20]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v2] ACPI: D3 states cleanup
On Fri, Apr 20, 2012 at 11:19:13AM +0800, Lin Ming wrote:
> On Fri, 2012-04-20 at 10:23 +0800, Aaron Lu wrote:
> > Hi,
> >
> > On Fri, Apr 20, 2012 at 09:19:09AM +0800, Lin Ming wrote:
> > > There are two ACPI D3 states defined now:
> > > ACPI_STATE_D3 and ACPI_STATE_D3_COLD.
> > >
> > > But the uses of these states are not clear/correct in some code.
> > > For example, some code refer ACPI_STATE_D3 as D3hot and others refer
> > > it as D3cold.
> > >
> > > This patch introduces ACPI_STATE_D3_HOT to refer to ACPI D3hot state.
> > > And changes ACPI_STATE_D3 to refer to ACPI D3cold state only.
> > > Also redefines ACPI_STATE_D3_COLD the same as ACPI_STATE_D3.
> > >
> >
> > With this patch now, if a device has _PS3, then we will set its D3hot
> > flag valid. This doesn't feel right to me, since per our discussion the
> > other day, we should assume _PS3 will put the device into D3cold.
> >
> > Or do you mean: if _PS3 is available, then both D3hot and D3cold is
> > valid from the perspective of acpi, it is the individual driver's
> > responsibility to decide which state is actually valid and will be used.
>
> Right.
>
> ACPI_STATE_D3(same as ACPI_STATE_D3_COLD now) is always valid.
>

I mean, if _PS3 is available, can we say D3hot is valid?

-Aaron

> Lin Ming
>
> >
> > -Aaron
> >
> > > Acked-by: Rafael J. Wysocki <rjw@sisk.pl>
> > > Signed-off-by: Lin Ming <ming.m.lin@intel.com>
> > > ---
> > > drivers/acpi/power.c | 2 +-
> > > drivers/acpi/scan.c | 9 +--------
> > > drivers/pci/pci-acpi.c | 4 ++--
> > > include/acpi/actypes.h | 7 ++++---
> > > 4 files changed, 8 insertions(+), 14 deletions(-)
> > >
> > > diff --git a/drivers/acpi/power.c b/drivers/acpi/power.c
> > > index 7049a7d..330bb4d 100644
> > > --- a/drivers/acpi/power.c
> > > +++ b/drivers/acpi/power.c
> > > @@ -631,7 +631,7 @@ int acpi_power_get_inferred_state(struct acpi_device *device, int *state)
> > > * We know a device's inferred power state when all the resources
> > > * required for a given D-state are 'on'.
> > > */
> > > - for (i = ACPI_STATE_D0; i < ACPI_STATE_D3; i++) {
> > > + for (i = ACPI_STATE_D0; i < ACPI_STATE_D3_HOT; i++) {
> > > list = &device->power.states[i].resources;
> > > if (list->count < 1)
> > > continue;
> > > diff --git a/drivers/acpi/scan.c b/drivers/acpi/scan.c
> > > index 767e2dc..fbf38ad 100644
> > > --- a/drivers/acpi/scan.c
> > > +++ b/drivers/acpi/scan.c
> > > @@ -869,7 +869,7 @@ static int acpi_bus_get_power_flags(struct acpi_device *device)
> > > /*
> > > * Enumerate supported power management states
> > > */
> > > - for (i = ACPI_STATE_D0; i <= ACPI_STATE_D3; i++) {
> > > + for (i = ACPI_STATE_D0; i <= ACPI_STATE_D3_HOT; i++) {
> > > struct acpi_device_power_state *ps = &device->power.states[i];
> > > char object_name[5] = { '_', 'P', 'R', '0' + i, '\0' };
> > >
> > > @@ -884,13 +884,6 @@ static int acpi_bus_get_power_flags(struct acpi_device *device)
> > > acpi_bus_add_power_resource(ps->resources.handles[j]);
> > > }
> > >
> > > - /* The exist of _PR3 indicates D3Cold support */
> > > - if (i == ACPI_STATE_D3) {
> > > - status = acpi_get_handle(device->handle, object_name, &handle);
> > > - if (ACPI_SUCCESS(status))
> > > - device->power.states[ACPI_STATE_D3_COLD].flags.valid = 1;
> > > - }
> > > -
> > > /* Evaluate "_PSx" to see if we can do explicit sets */
> > > object_name[2] = 'S';
> > > status = acpi_get_handle(device->handle, object_name, &handle);
> > > diff --git a/drivers/pci/pci-acpi.c b/drivers/pci/pci-acpi.c
> > > index 0f150f2..1929c0c 100644
> > > --- a/drivers/pci/pci-acpi.c
> > > +++ b/drivers/pci/pci-acpi.c
> > > @@ -200,7 +200,7 @@ static pci_power_t acpi_pci_choose_state(struct pci_dev *pdev)
> > > return PCI_D1;
> > > case ACPI_STATE_D2:
> > > return PCI_D2;
> > > - case ACPI_STATE_D3:
> > > + case ACPI_STATE_D3_HOT:
> > > return PCI_D3hot;
> > > case ACPI_STATE_D3_COLD:
> > > return PCI_D3cold;
> > > @@ -223,7 +223,7 @@ static int acpi_pci_set_power_state(struct pci_dev *dev, pci_power_t state)
> > > [PCI_D0] = ACPI_STATE_D0,
> > > [PCI_D1] = ACPI_STATE_D1,
> > > [PCI_D2] = ACPI_STATE_D2,
> > > - [PCI_D3hot] = ACPI_STATE_D3,
> > > + [PCI_D3hot] = ACPI_STATE_D3_HOT,
> > > [PCI_D3cold] = ACPI_STATE_D3
> > > };
> > > int error = -EINVAL;
> > > diff --git a/include/acpi/actypes.h b/include/acpi/actypes.h
> > > index eba6604..e8bcc47 100644
> > > --- a/include/acpi/actypes.h
> > > +++ b/include/acpi/actypes.h
> > > @@ -499,9 +499,10 @@ typedef u64 acpi_integer;
> > > #define ACPI_STATE_D0 (u8) 0
> > > #define ACPI_STATE_D1 (u8) 1
> > > #define ACPI_STATE_D2 (u8) 2
> > > -#define ACPI_STATE_D3 (u8) 3
> > > -#define ACPI_STATE_D3_COLD (u8) 4
> > > -#define ACPI_D_STATES_MAX ACPI_STATE_D3_COLD
> > > +#define ACPI_STATE_D3_HOT (u8) 3
> > > +#define ACPI_STATE_D3 (u8) 4
> > > +#define ACPI_STATE_D3_COLD ACPI_STATE_D3
> > > +#define ACPI_D_STATES_MAX ACPI_STATE_D3
> > > #define ACPI_D_STATE_COUNT 5
> > >
> > > #define ACPI_STATE_C0 (u8) 0
> > > --
> > > 1.7.2.5
> > >
> > >
> > >
> > >
> >
>
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at http://www.tux.org/lkml/
>



\
 
 \ /
  Last update: 2012-04-20 07:25    [W:0.059 / U:2.312 seconds]
©2003-2017 Jasper Spaans. hosted at Digital OceanAdvertise on this site