lkml.org 
[lkml]   [2012]   [Apr]   [16]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
Subject[tip:x86/urgent] x86, efi: Add dedicated EFI stub entry point
Commit-ID:  c206d672150e7abbb5c14a70665abca24ea87ea5
Gitweb: http://git.kernel.org/tip/c206d672150e7abbb5c14a70665abca24ea87ea5
Author: Matt Fleming <matt.fleming@intel.com>
AuthorDate: Sun, 15 Apr 2012 16:06:04 +0100
Committer: H. Peter Anvin <hpa@linux.intel.com>
CommitDate: Mon, 16 Apr 2012 10:22:44 -0700

x86, efi: Add dedicated EFI stub entry point

The method used to work out whether we were booted by EFI firmware or
via a boot loader is broken. Because efi_main() is always executed
when booting from a boot loader we will dereference invalid pointers
either on the stack (CONFIG_X86_32) or contained in %rdx
(CONFIG_X86_64) when searching for an EFI System Table signature.

Instead of dereferencing these invalid system table pointers, add a
new entry point that is only used when booting from EFI firmware, when
we know the pointer arguments will be valid. With this change legacy
boot loaders will no longer execute efi_main(), but will instead skip
EFI stub initialisation completely.

[ hpa: Marking this for urgent/stable since it is a regression when
the option is enabled; without the option the patch has no effect ]

Cc: H. Peter Anvin <hpa@zytor.com>
Signed-off-by: Matt Fleming <matt.hfleming@intel.com>
Link: http://lkml.kernel.org/r/1334584744.26997.14.camel@mfleming-mobl1.ger.corp.intel.com
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
Cc: <stable@vger.kernel.org> v3.3
---
arch/x86/boot/compressed/head_32.S | 14 +++++++++++---
arch/x86/boot/compressed/head_64.S | 22 ++++++++++++++++------
arch/x86/boot/tools/build.c | 15 +++++++++++----
3 files changed, 38 insertions(+), 13 deletions(-)

diff --git a/arch/x86/boot/compressed/head_32.S b/arch/x86/boot/compressed/head_32.S
index a055993..c85e3ac 100644
--- a/arch/x86/boot/compressed/head_32.S
+++ b/arch/x86/boot/compressed/head_32.S
@@ -33,6 +33,9 @@
__HEAD
ENTRY(startup_32)
#ifdef CONFIG_EFI_STUB
+ jmp preferred_addr
+
+ .balign 0x10
/*
* We don't need the return address, so set up the stack so
* efi_main() can find its arugments.
@@ -41,12 +44,17 @@ ENTRY(startup_32)

call efi_main
cmpl $0, %eax
- je preferred_addr
movl %eax, %esi
- call 1f
+ jne 2f
1:
+ /* EFI init failed, so hang. */
+ hlt
+ jmp 1b
+2:
+ call 3f
+3:
popl %eax
- subl $1b, %eax
+ subl $3b, %eax
subl BP_pref_address(%esi), %eax
add BP_code32_start(%esi), %eax
leal preferred_addr(%eax), %eax
diff --git a/arch/x86/boot/compressed/head_64.S b/arch/x86/boot/compressed/head_64.S
index 558d76c..87e03a1 100644
--- a/arch/x86/boot/compressed/head_64.S
+++ b/arch/x86/boot/compressed/head_64.S
@@ -200,18 +200,28 @@ ENTRY(startup_64)
* entire text+data+bss and hopefully all of memory.
*/
#ifdef CONFIG_EFI_STUB
- pushq %rsi
+ /*
+ * The entry point for the PE/COFF executable is 0x210, so only
+ * legacy boot loaders will execute this jmp.
+ */
+ jmp preferred_addr
+
+ .org 0x210
mov %rcx, %rdi
mov %rdx, %rsi
call efi_main
- popq %rsi
- cmpq $0,%rax
- je preferred_addr
movq %rax,%rsi
- call 1f
+ cmpq $0,%rax
+ jne 2f
1:
+ /* EFI init failed, so hang. */
+ hlt
+ jmp 1b
+2:
+ call 3f
+3:
popq %rax
- subq $1b, %rax
+ subq $3b, %rax
subq BP_pref_address(%rsi), %rax
add BP_code32_start(%esi), %eax
leaq preferred_addr(%rax), %rax
diff --git a/arch/x86/boot/tools/build.c b/arch/x86/boot/tools/build.c
index ed54976..24443a3 100644
--- a/arch/x86/boot/tools/build.c
+++ b/arch/x86/boot/tools/build.c
@@ -205,8 +205,13 @@ int main(int argc, char ** argv)
put_unaligned_le32(file_sz, &buf[pe_header + 0x50]);

#ifdef CONFIG_X86_32
- /* Address of entry point */
- put_unaligned_le32(i, &buf[pe_header + 0x28]);
+ /*
+ * Address of entry point.
+ *
+ * The EFI stub entry point is +16 bytes from the start of
+ * the .text section.
+ */
+ put_unaligned_le32(i + 16, &buf[pe_header + 0x28]);

/* .text size */
put_unaligned_le32(file_sz, &buf[pe_header + 0xb0]);
@@ -217,9 +222,11 @@ int main(int argc, char ** argv)
/*
* Address of entry point. startup_32 is at the beginning and
* the 64-bit entry point (startup_64) is always 512 bytes
- * after.
+ * after. The EFI stub entry point is 16 bytes after that, as
+ * the first instruction allows legacy loaders to jump over
+ * the EFI stub initialisation
*/
- put_unaligned_le32(i + 512, &buf[pe_header + 0x28]);
+ put_unaligned_le32(i + 528, &buf[pe_header + 0x28]);

/* .text size */
put_unaligned_le32(file_sz, &buf[pe_header + 0xc0]);

\
 
 \ /
  Last update: 2012-04-16 20:41    [W:0.032 / U:0.020 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site