lkml.org 
[lkml]   [2012]   [Apr]   [16]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    Patch in this message
    /
    From
    Subject[PATCH v2]NEXT:drivers:staging:rtl8187se Fix typos in staging:rtl8187se
    Date
    From: "Justin P. Mattock" <Justin P. Mattock>

    RESEND: resending this patch because my email was mangled with gitconfig.
    The below patch fixes some typos that I found while reading.

    Signed-off-by: Justin P. Mattock <justinmattock@gmail.com>

    ---
    drivers/staging/rtl8187se/Makefile | 2 +-
    drivers/staging/rtl8187se/ieee80211/dot11d.c | 2 +-
    drivers/staging/rtl8187se/ieee80211/ieee80211.h | 14 ++++----
    .../rtl8187se/ieee80211/ieee80211_softmac.c | 24 ++++++++--------
    .../rtl8187se/ieee80211/ieee80211_softmac_wx.c | 2 +-
    drivers/staging/rtl8187se/ieee80211/ieee80211_tx.c | 2 +-
    drivers/staging/rtl8187se/ieee80211/ieee80211_wx.c | 2 +-
    drivers/staging/rtl8187se/r8180.h | 10 +++---
    drivers/staging/rtl8187se/r8180_core.c | 30 ++++++++++----------
    drivers/staging/rtl8187se/r8180_dm.c | 16 +++++-----
    drivers/staging/rtl8187se/r8180_rtl8225z2.c | 4 +-
    drivers/staging/rtl8187se/r8180_wx.c | 6 ++--
    drivers/staging/rtl8187se/r8180_wx.h | 2 +-
    drivers/staging/rtl8187se/r8185b_init.c | 10 +++---
    14 files changed, 63 insertions(+), 63 deletions(-)

    diff --git a/drivers/staging/rtl8187se/Makefile b/drivers/staging/rtl8187se/Makefile
    index 72db504..91d1aa2 100644
    --- a/drivers/staging/rtl8187se/Makefile
    +++ b/drivers/staging/rtl8187se/Makefile
    @@ -10,7 +10,7 @@ ccflags-y += -DHIGH_POWER
    ccflags-y += -DSW_DIG
    ccflags-y += -DRATE_ADAPT

    -#enable it for legacy power save, disable it for leisure power save
    +#enable it for legacy power save, disable it for leisure power save
    ccflags-y += -DENABLE_LPS


    diff --git a/drivers/staging/rtl8187se/ieee80211/dot11d.c b/drivers/staging/rtl8187se/ieee80211/dot11d.c
    index 309bb8b..0e93eb0 100644
    --- a/drivers/staging/rtl8187se/ieee80211/dot11d.c
    +++ b/drivers/staging/rtl8187se/ieee80211/dot11d.c
    @@ -55,7 +55,7 @@ Dot11d_Reset(struct ieee80211_device *ieee)

    //
    // Description:
    -// Update country IE from Beacon or Probe Resopnse
    +// Update country IE from Beacon or Probe Response
    // and configure PHY for operation in the regulatory domain.
    //
    // TODO:
    diff --git a/drivers/staging/rtl8187se/ieee80211/ieee80211.h b/drivers/staging/rtl8187se/ieee80211/ieee80211.h
    index 40dd715..b94c48b 100644
    --- a/drivers/staging/rtl8187se/ieee80211/ieee80211.h
    +++ b/drivers/staging/rtl8187se/ieee80211/ieee80211.h
    @@ -834,7 +834,7 @@ enum ieee80211_state {
    /* the association procedure is sending AUTH request*/
    IEEE80211_ASSOCIATING_AUTHENTICATING,

    - /* the association procedure has successfully authentcated
    + /* the association procedure has successfully authenticated
    * and is sending association request
    */
    IEEE80211_ASSOCIATING_AUTHENTICATED,
    @@ -934,7 +934,7 @@ struct ieee80211_device {
    * with RX of broad/multicast frames */

    /* Fragmentation structures */
    - // each streaming contain a entry
    + /* each stream contains an entry */
    struct ieee80211_frag_entry frag_cache[17][IEEE80211_FRAG_CACHE_LEN];
    unsigned int frag_next_idx[17];
    u16 fts; /* Fragmentation Threshold */
    @@ -972,7 +972,7 @@ struct ieee80211_device {

    int rate; /* current rate */
    int basic_rate;
    - //FIXME: pleace callback, see if redundant with softmac_features
    + //FIXME: please callback, see if redundant with softmac_features
    short active_scan;

    /* this contains flags for selectively enable softmac support */
    @@ -1106,7 +1106,7 @@ struct ieee80211_device {

    /* used instead of hard_start_xmit (not softmac_hard_start_xmit)
    * if the IEEE_SOFTMAC_TX_QUEUE feature is used to TX data
    - * frames. I the option IEEE_SOFTMAC_SINGLE_QUEUE is also set
    + * frames. If the option IEEE_SOFTMAC_SINGLE_QUEUE is also set
    * then also management frames are sent via this callback.
    * This function can't sleep.
    */
    @@ -1124,7 +1124,7 @@ struct ieee80211_device {

    /* ask to the driver to retune the radio .
    * This function can sleep. the driver should ensure
    - * the radio has been swithced before return.
    + * the radio has been switched before return.
    */
    void (*set_chan)(struct net_device *dev,short ch);

    @@ -1135,7 +1135,7 @@ struct ieee80211_device {
    * The syncro version is similar to the start_scan but
    * does not return until all channels has been scanned.
    * this is called in user context and should sleep,
    - * it is called in a work_queue when swithcing to ad-hoc mode
    + * it is called in a work_queue when switching to ad-hoc mode
    * or in behalf of iwlist scan when the card is associated
    * and root user ask for a scan.
    * the function stop_scan should stop both the syncro and
    @@ -1196,7 +1196,7 @@ struct ieee80211_device {
    /* Generate probe requests */
    #define IEEE_SOFTMAC_PROBERQ (1<<4)

    -/* Generate respones to probe requests */
    +/* Generate response to probe requests */
    #define IEEE_SOFTMAC_PROBERS (1<<5)

    /* The ieee802.11 stack will manages the netif queue
    diff --git a/drivers/staging/rtl8187se/ieee80211/ieee80211_softmac.c b/drivers/staging/rtl8187se/ieee80211/ieee80211_softmac.c
    index 0f909b7..8173240 100644
    --- a/drivers/staging/rtl8187se/ieee80211/ieee80211_softmac.c
    +++ b/drivers/staging/rtl8187se/ieee80211/ieee80211_softmac.c
    @@ -42,7 +42,7 @@ short ieee80211_is_shortslot(const struct ieee80211_network *net)
    return net->capability & WLAN_CAPABILITY_SHORT_SLOT;
    }

    -/* returns the total length needed for pleacing the RATE MFIE
    +/* returns the total length needed for placing the RATE MFIE
    * tag and the EXTENDED RATE MFIE tag if needed.
    * It encludes two bytes per tag for the tag itself and its len
    */
    @@ -60,7 +60,7 @@ unsigned int ieee80211_MFIE_rate_len(struct ieee80211_device *ieee)
    return rate_len;
    }

    -/* pleace the MFIE rate, tag to the memory (double) poined.
    +/* place the MFIE rate, tag to the memory (double) poised.
    * Then it updates the pointer so that
    * it points after the new MFIE tag added.
    */
    @@ -467,7 +467,7 @@ void ieee80211_softmac_scan_syncro(struct ieee80211_device *ieee)
    * So we switch to IEEE80211_LINKED_SCANNING to remember
    * that we are still logically linked (not interested in
    * new network events, despite for updating the net list,
    - * but we are temporarly 'unlinked' as the driver shall
    + * but we are temporarily 'unlinked' as the driver shall
    * not filter RX frames and the channel is changing.
    * So the only situation in witch are interested is to check
    * if the state become LINKED because of the #1 situation
    @@ -530,7 +530,7 @@ void ieee80211_softmac_ips_scan_syncro(struct ieee80211_device *ieee)
    * So we switch to IEEE80211_LINKED_SCANNING to remember
    * that we are still logically linked (not interested in
    * new network events, despite for updating the net list,
    - * but we are temporarly 'unlinked' as the driver shall
    + * but we are temporarily 'unlinked' as the driver shall
    * not filter RX frames and the channel is changing.
    * So the only situation in witch are interested is to check
    * if the state become LINKED because of the #1 situation
    @@ -1140,7 +1140,7 @@ void ieee80211_associate_abort(struct ieee80211_device *ieee)

    ieee->associate_seq++;

    - /* don't scan, and avoid to have the RX path possibily
    + /* don't scan, and avoid to have the RX path possibly
    * try again to associate. Even do not react to AUTH or
    * ASSOC response. Just wait for the retry wq to be scheduled.
    * Here we will check if there are good nets to associate
    @@ -1346,14 +1346,14 @@ inline void ieee80211_softmac_new_net(struct ieee80211_device *ieee, struct ieee
    //printk("apset=%d apmatch=%d ssidset=%d ssidbroad=%d ssidmatch=%d\n",apset,apmatch,ssidset,ssidbroad,ssidmatch);

    if ( /* if the user set the AP check if match.
    - * if the network does not broadcast essid we check the user supplyed ANY essid
    + * if the network does not broadcast essid we check the user supplied ANY essid
    * if the network does broadcast and the user does not set essid it is OK
    * if the network does broadcast and the user did set essid chech if essid match
    */
    ( apset && apmatch &&
    ((ssidset && ssidbroad && ssidmatch) || (ssidbroad && !ssidset) || (!ssidbroad && ssidset)) ) ||
    /* if the ap is not set, check that the user set the bssid
    - * and the network does bradcast and that those two bssid matches
    + * and the network does broadcast and that those two bssid matches
    */
    (!apset && ssidset && ssidbroad && ssidmatch)
    ){
    @@ -1821,7 +1821,7 @@ ieee80211_rx_frame_softmac(struct ieee80211_device *ieee, struct sk_buff *skb,

    while (left >= sizeof(struct ieee80211_info_element_hdr)) {
    if (sizeof(struct ieee80211_info_element_hdr) + info_element->len > left) {
    - printk(KERN_WARNING "[re]associate reeponse error!");
    + printk(KERN_WARNING "[re]associate response error!");
    return 1;
    }
    switch (info_element->id) {
    @@ -2184,15 +2184,15 @@ void ieee80211_start_ibss_wq(struct work_struct *work)

    if(ieee->state == IEEE80211_NOLINK)
    ieee->current_network.channel = 10;
    - /* if not then the state is not linked. Maybe the user swithced to
    + /* if not then the state is not linked. Maybe the user switched to
    * ad-hoc mode just after being in monitor mode, or just after
    * being very few time in managed mode (so the card have had no
    * time to scan all the chans..) or we have just run up the iface
    * after setting ad-hoc mode. So we have to give another try..
    * Here, in ibss mode, should be safe to do this without extra care
    - * (in bss mode we had to make sure no-one tryed to associate when
    + * (in bss mode we had to make sure no-one tried to associate when
    * we had just checked the ieee->state and we was going to start the
    - * scan) beacause in ibss mode the ieee80211_new_net function, when
    + * scan) because in ibss mode the ieee80211_new_net function, when
    * finds a good net, just set the ieee->state to IEEE80211_LINKED,
    * so, at worst, we waste a bit of time to initiate an unneeded syncro
    * scan, that will stop at the first round because it sees the state
    @@ -2342,7 +2342,7 @@ void ieee80211_associate_retry_wq(struct work_struct *work)
    goto exit;
    /* until we do not set the state to IEEE80211_NOLINK
    * there are no possibility to have someone else trying
    - * to start an association procdure (we get here with
    + * to start an association procedure (we get here with
    * ieee->state = IEEE80211_ASSOCIATING).
    * When we set the state to IEEE80211_NOLINK it is possible
    * that the RX path run an attempt to associate, but
    diff --git a/drivers/staging/rtl8187se/ieee80211/ieee80211_softmac_wx.c b/drivers/staging/rtl8187se/ieee80211/ieee80211_softmac_wx.c
    index e46ff2f..5d20490 100644
    --- a/drivers/staging/rtl8187se/ieee80211/ieee80211_softmac_wx.c
    +++ b/drivers/staging/rtl8187se/ieee80211/ieee80211_softmac_wx.c
    @@ -362,7 +362,7 @@ int ieee80211_wx_set_essid(struct ieee80211_device *ieee,
    ieee80211_stop_protocol(ieee);

    /* this is just to be sure that the GET wx callback
    - * has consisten infos. not needed otherwise
    + * has consistent infos. not needed otherwise
    */
    spin_lock_irqsave(&ieee->lock, flags);

    diff --git a/drivers/staging/rtl8187se/ieee80211/ieee80211_tx.c b/drivers/staging/rtl8187se/ieee80211/ieee80211_tx.c
    index 552115c..77bb068 100644
    --- a/drivers/staging/rtl8187se/ieee80211/ieee80211_tx.c
    +++ b/drivers/staging/rtl8187se/ieee80211/ieee80211_tx.c
    @@ -328,7 +328,7 @@ int ieee80211_rtl_xmit(struct sk_buff *skb,
    //printk(KERN_WARNING "upper layer packet!\n");
    spin_lock_irqsave(&ieee->lock, flags);

    - /* If there is no driver handler to take the TXB, dont' bother
    + /* If there is no driver handler to take the TXB, don't bother
    * creating it... */
    if ((!ieee->hard_start_xmit && !(ieee->softmac_features & IEEE_SOFTMAC_TX_QUEUE))||
    ((!ieee->softmac_data_hard_start_xmit && (ieee->softmac_features & IEEE_SOFTMAC_TX_QUEUE)))) {
    diff --git a/drivers/staging/rtl8187se/ieee80211/ieee80211_wx.c b/drivers/staging/rtl8187se/ieee80211/ieee80211_wx.c
    index ca414a9..c7917b2 100644
    --- a/drivers/staging/rtl8187se/ieee80211/ieee80211_wx.c
    +++ b/drivers/staging/rtl8187se/ieee80211/ieee80211_wx.c
    @@ -363,7 +363,7 @@ int ieee80211_wx_set_encode(struct ieee80211_device *ieee,
    (*crypt)->priv);
    sec.flags |= (1 << key);
    /* This ensures a key will be activated if no key is
    - * explicitely set */
    + * explicitly set */
    if (key == sec.active_key)
    sec.flags |= SEC_ACTIVE_KEY;
    ieee->tx_keyidx = key;//by wb 080312
    diff --git a/drivers/staging/rtl8187se/r8180.h b/drivers/staging/rtl8187se/r8180.h
    index a2c46ae..2682afb 100644
    --- a/drivers/staging/rtl8187se/r8180.h
    +++ b/drivers/staging/rtl8187se/r8180.h
    @@ -11,7 +11,7 @@

    Parts of this driver are based on the Intel Pro Wireless 2100 GPL driver

    - We want to tanks the Authors of those projects and the Ndiswrapper
    + We want to thanks the Authors of those projects and the Ndiswrapper
    project Authors.
    */

    @@ -514,12 +514,12 @@ typedef struct r8180_priv
    bool bDefaultAntenna1;
    u8 SignalStrength;
    long Stats_SignalStrength;
    - long LastSignalStrengthInPercent; // In percentange, used for smoothing, e.g. Moving Average.
    + long LastSignalStrengthInPercent; // In percentage, used for smoothing, e.g. Moving Average.
    u8 SignalQuality; // in 0-100 index.
    long Stats_SignalQuality;
    long RecvSignalPower; // in dBm.
    long Stats_RecvSignalPower;
    - u8 LastRxPktAntenna; // +by amy 080312 Antenn which received the lasted packet. 0: Aux, 1:Main. Added by Roger, 2008.01.25.
    + u8 LastRxPktAntenna; // +by amy 080312 Antenna which received the lasted packet. 0: Aux, 1:Main. Added by Roger, 2008.01.25.
    u32 AdRxOkCnt;
    long AdRxSignalStrength;
    u8 CurrAntennaIndex; // Index to current Antenna (both Tx and Rx).
    @@ -530,7 +530,7 @@ typedef struct r8180_priv
    long AdRxSsThreshold; // Signal strength threshold to switch antenna.
    long AdMaxRxSsThreshold; // Max value of AdRxSsThreshold.
    bool bAdSwitchedChecking; // TRUE if we shall shall check Rx signal strength for last time switching antenna.
    - long AdRxSsBeforeSwitched; // Rx signal strength before we swithed antenna.
    + long AdRxSsBeforeSwitched; // Rx signal strength before we switched antenna.
    struct timer_list SwAntennaDiversityTimer;
    //by amy for antenna
    //{by amy 080312
    @@ -553,7 +553,7 @@ typedef struct r8180_priv
    bool bDigMechanism; // TRUE if DIG is enabled, FALSE ow.
    bool bRegHighPowerMechanism; // For High Power Mechanism. 061010, by rcnjko.
    u32 FalseAlarmRegValue;
    - u8 RegDigOfdmFaUpTh; // Upper threhold of OFDM false alarm, which is used in DIG.
    + u8 RegDigOfdmFaUpTh; // Upper threshold of OFDM false alarm, which is used in DIG.
    u8 DIG_NumberFallbackVote;
    u8 DIG_NumberUpgradeVote;
    // For HW antenna diversity, added by Roger, 2008.01.30.
    diff --git a/drivers/staging/rtl8187se/r8180_core.c b/drivers/staging/rtl8187se/r8180_core.c
    index 4fe52f6..a513ec7 100644
    --- a/drivers/staging/rtl8187se/r8180_core.c
    +++ b/drivers/staging/rtl8187se/r8180_core.c
    @@ -1329,7 +1329,7 @@ u16 N_DBPSOfRate(u16 DataRate)
    }

    /*
    - * For Netgear case, they want good-looking singal strength.
    + * For Netgear case, they want good-looking signal strength.
    */
    long NetgearSignalStrengthTranslate(long LastSS, long CurrSS)
    {
    @@ -1380,7 +1380,7 @@ long TranslateToDbm8185(u8 SignalStrengthIndex)

    /*
    * Perform signal smoothing for dynamic mechanism.
    - * This is different with PerformSignalSmoothing8185 in smoothing fomula.
    + * This is different with PerformSignalSmoothing8185 in smoothing formula.
    * No dramatic adjustion is apply because dynamic mechanism need some degree
    * of correctness. Ported from 8187B.
    */
    @@ -1535,7 +1535,7 @@ void rtl8180_rx(struct net_device *dev)
    /* HW is probably passing several buggy frames
    * without FD or LD flag set.
    * Throw this garbage away to prevent skb
    - * memory exausting
    + * memory exhausting
    */
    if (!priv->rx_skb_complete)
    dev_kfree_skb_any(priv->rx_skb);
    @@ -1648,14 +1648,14 @@ void rtl8180_rx(struct net_device *dev)
    priv->Stats_SignalQuality = (long)(priv->Stats_SignalQuality * 5 + (long)priv->SignalQuality + 5) / 6;
    priv->Stats_RecvSignalPower = (long)(priv->Stats_RecvSignalPower * 5 + priv->RecvSignalPower - 1) / 6;

    - /* Figure out which antenna that received the lasted packet. */
    + /* Figure out which antenna that received the last packet. */
    priv->LastRxPktAntenna = Antenna ? 1 : 0; /* 0: aux, 1: main. */
    SwAntennaDiversityRxOk8185(dev, priv->SignalStrength);
    }

    if (first) {
    if (!priv->rx_skb_complete) {
    - /* seems that HW sometimes fails to reiceve and
    + /* seems that HW sometimes fails to receive and
    doesn't provide the last descriptor */
    dev_kfree_skb_any(priv->rx_skb);
    priv->stats.rxnolast++;
    @@ -1672,7 +1672,7 @@ void rtl8180_rx(struct net_device *dev)
    priv->rx_skb_complete = 0;
    priv->rx_skb->dev = dev;
    } else {
    - /* if we are here we should have already RXed
    + /* if we are here we should have already RXed
    * the first frame.
    * If we get here and the skb is not allocated then
    * we have just throw out garbage (skb not allocated)
    @@ -1821,15 +1821,15 @@ rate) {
    /*
    * This is a rough attempt to TX a frame
    * This is called by the ieee 80211 stack to TX management frames.
    - * If the ring is full packet are dropped (for data frame the queue
    + * If the ring is full packets are dropped (for data frame the queue
    * is stopped before this can happen). For this reason it is better
    * if the descriptors are larger than the largest management frame
    - * we intend to TX: i'm unsure what the HW does if it will not found
    + * we intend to TX: i'm unsure what the HW does if it will not find
    * the last fragment of a frame because it has been dropped...
    * Since queues for Management and Data frames are different we
    * might use a different lock than tx_lock (for example mgmt_tx_lock)
    */
    -/* these function may loops if invoked with 0 descriptors or 0 len buffer */
    +/* these function may loop if invoked with 0 descriptors or 0 len buffer */
    int rtl8180_hard_start_xmit(struct sk_buff *skb, struct net_device *dev)
    {
    struct r8180_priv *priv = (struct r8180_priv *)ieee80211_priv(dev);
    @@ -2378,7 +2378,7 @@ void rtl8180_wmm_param_update(struct work_struct *work)
    u8 u1bAIFS;
    u32 u4bAcParam;
    pAcParam = (PAC_PARAM)(&AcParam);
    - /* Retrive paramters to udpate. */
    + /* Retrieve paramters to update. */
    u1bAIFS = pAcParam->f.AciAifsn.f.AIFSN * (((mode&IEEE_G) == IEEE_G) ? 9 : 20) + aSifsTime;
    u4bAcParam = ((((u32)(pAcParam->f.TXOPLimit))<<AC_PARAM_TXOP_LIMIT_OFFSET)|
    (((u32)(pAcParam->f.Ecw.f.ECWmax))<<AC_PARAM_ECW_MAX_OFFSET)|
    @@ -2414,7 +2414,7 @@ void rtl8180_wmm_param_update(struct work_struct *work)
    u8 u1bAIFS;
    u32 u4bAcParam;

    - /* Retrive paramters to udpate. */
    + /* Retrieve paramters to update. */
    eACI = pAcParam->f.AciAifsn.f.ACI;
    /* Mode G/A: slotTimeTimer = 9; Mode B: 20 */
    u1bAIFS = pAcParam->f.AciAifsn.f.AIFSN * (((mode&IEEE_G) == IEEE_G) ? 9 : 20) + aSifsTime;
    @@ -2700,7 +2700,7 @@ short rtl8180_init(struct net_device *dev)
    priv->bTxPowerTrack = false;
    priv->ThermalMeter = 0;
    priv->FalseAlarmRegValue = 0;
    - priv->RegDigOfdmFaUpTh = 0xc; /* Upper threhold of OFDM false alarm, which is used in DIG. */
    + priv->RegDigOfdmFaUpTh = 0xc; /* Upper threshold of OFDM false alarm, which is used in DIG. */
    priv->DIG_NumberFallbackVote = 0;
    priv->DIG_NumberUpgradeVote = 0;
    priv->LastSignalStrengthInPercent = 0;
    @@ -2896,7 +2896,7 @@ short rtl8180_init(struct net_device *dev)
    priv->chtxpwr_ofdm[i+1] = (word & 0xff00) >> 8;
    }

    - /* 3Read crystal calibtration and thermal meter indication on 87SE. */
    + /* 3Read crystal calibration and thermal meter indication on 87SE. */
    eeprom_93cx6_read(&eeprom, EEPROM_RSV>>1, &tmpu16);

    /* Crystal calibration for Xin and Xout resp. */
    @@ -3140,7 +3140,7 @@ void rtl8180_adapter_start(struct net_device *dev)

    /*
    * The following is very strange. seems to be that 1 means test mode,
    - * but we need to acknolwledges the nic when a packet is ready
    + * but we need to acknowledges the nic when a packet is ready
    * although we set it to 0
    */

    @@ -3971,7 +3971,7 @@ irqreturn_t rtl8180_interrupt(int irq, void *netdev, struct pt_regs *regs)
    }

    if (inta == 0xffff) {
    - /* HW disappared */
    + /* HW disappeared */
    spin_unlock_irqrestore(&priv->irq_th_lock, flags);
    return IRQ_HANDLED;
    }
    diff --git a/drivers/staging/rtl8187se/r8180_dm.c b/drivers/staging/rtl8187se/r8180_dm.c
    index 4d7a595..b8f2ba0 100644
    --- a/drivers/staging/rtl8187se/r8180_dm.c
    +++ b/drivers/staging/rtl8187se/r8180_dm.c
    @@ -2,7 +2,7 @@
    #include "r8180_hw.h"
    #include "r8180_93cx6.h"

    - /* Return TRUE if we shall perform High Power Mecahnism, FALSE otherwise. */
    + /* Return TRUE if we shall perform High Power Mechanism, FALSE otherwise. */
    #define RATE_ADAPTIVE_TIMER_PERIOD 300

    bool CheckHighPower(struct net_device *dev)
    @@ -105,7 +105,7 @@ void rtl8180_tx_pw_wq(struct work_struct *work)


    /*
    - * Return TRUE if we shall perform DIG Mecahnism, FALSE otherwise.
    + * Return TRUE if we shall perform DIG Mechanism, FALSE otherwise.
    */
    bool CheckDig(struct net_device *dev)
    {
    @@ -507,7 +507,7 @@ void StaRateAdaptive87SE(struct net_device *dev)
    * and retry rate.
    * (3) Remove all Initial Gain Updates over OFDM rate. To avoid the complicated
    * situation, Initial Gain Update is upon on DIG mechanism except CCK rate.
    - * (4) Add the mehanism of trying to upgrade tx rate.
    + * (4) Add the mechanism of trying to upgrade tx rate.
    * (5) Record the information of upping tx rate to avoid trying upping tx rate constantly.
    *
    */
    @@ -528,7 +528,7 @@ void StaRateAdaptive87SE(struct net_device *dev)
    if (priv->bTryuping == true) {
    /* 2 For Test Upgrading mechanism
    * Note:
    - * Sometimes the throughput is upon on the capability bwtween the AP and NIC,
    + * Sometimes the throughput is upon on the capability between the AP and NIC,
    * thus the low data rate does not improve the performance.
    * We randomly upgrade the data rate and check if the retry rate is improved.
    */
    @@ -704,7 +704,7 @@ void StaRateAdaptive87SE(struct net_device *dev)

    /*
    * The difference in throughput between 48Mbps and 36Mbps is 8M.
    - * So, we must be carefully in this rate scale. Isaiah 2008-02-15.
    + * So, we must be careful in this rate scale. Isaiah 2008-02-15.
    */
    if (((priv->CurrentOperaRate == 72) || (priv->CurrentOperaRate == 48) || (priv->CurrentOperaRate == 36)) &&
    (priv->FailTxRateCount > 2))
    @@ -1009,7 +1009,7 @@ void SwAntennaDiversity(struct net_device *dev)
    if (priv->AdCheckPeriod > priv->AdMaxCheckPeriod)
    priv->AdCheckPeriod = priv->AdMaxCheckPeriod;

    - /* Wrong deceision => switch back. */
    + /* Wrong decision => switch back. */
    SwitchAntenna(dev);
    } else {
    /* Rx Signal Strength is improved. */
    @@ -1057,7 +1057,7 @@ void SwAntennaDiversity(struct net_device *dev)
    }
    /*
    * <Roger_Notes> We evaluate Rx signal strength ONLY when default antenna
    - * didn't changed by HW evaluation.
    + * didn't change by HW evaluation.
    * 2008.02.27.
    *
    * [TRC Dell Lab] SignalStrength is inaccuracy. Isaiah 2008-03-05
    @@ -1098,7 +1098,7 @@ void SwAntennaDiversity(struct net_device *dev)
    priv->AdAuxAntennaRxOkCnt = 0;
    }

    - /* Return TRUE if we shall perform Tx Power Tracking Mecahnism, FALSE otherwise. */
    + /* Return TRUE if we shall perform Tx Power Tracking Mechanism, FALSE otherwise. */
    bool CheckTxPwrTracking(struct net_device *dev)
    {
    struct r8180_priv *priv = (struct r8180_priv *)ieee80211_priv(dev);
    diff --git a/drivers/staging/rtl8187se/r8180_rtl8225z2.c b/drivers/staging/rtl8187se/r8180_rtl8225z2.c
    index ee5b867..d28c1d9 100644
    --- a/drivers/staging/rtl8187se/r8180_rtl8225z2.c
    +++ b/drivers/staging/rtl8187se/r8180_rtl8225z2.c
    @@ -190,7 +190,7 @@ static void rtl8225_SetTXPowerLevel(struct net_device *dev, short ch)
    write_phy_cck(dev, 0x44 + i, power);
    }

    - /* FIXME Is this delay really needeed ? */
    + /* FIXME Is this delay really needed ? */
    force_pci_posting(dev);
    mdelay(1);

    @@ -479,7 +479,7 @@ s8 DbmToTxPwrIdx(struct r8180_priv *priv, WIRELESS_MODE WirelessMode,

    /*
    * TRUE if we want to use a default implementation.
    - * We shall set it to FALSE when we have exact translation formular
    + * We shall set it to FALSE when we have exact translation formula
    * for target IC. 070622, by rcnjko.
    */
    if (bUseDefault) {
    diff --git a/drivers/staging/rtl8187se/r8180_wx.c b/drivers/staging/rtl8187se/r8180_wx.c
    index 303ec69..46ee6f4 100644
    --- a/drivers/staging/rtl8187se/r8180_wx.c
    +++ b/drivers/staging/rtl8187se/r8180_wx.c
    @@ -13,7 +13,7 @@

    Parts of this driver are based on the Intel Pro Wireless 2100 GPL driver.

    - We want to tanks the Authors of those projects and the Ndiswrapper
    + We want to thanks the Authors of those projects and the Ndiswrapper
    project Authors.
    */

    @@ -1181,7 +1181,7 @@ static iw_handler r8180_wx_handlers[] = {
    r8180_wx_set_wap, /* SIOCSIWAP */
    r8180_wx_get_wap, /* SIOCGIWAP */
    r8180_wx_set_mlme, /* SIOCSIWMLME*/
    - dummy, /* SIOCGIWAPLIST -- depricated */
    + dummy, /* SIOCGIWAPLIST -- deprecated */
    r8180_wx_set_scan, /* SIOCSIWSCAN */
    r8180_wx_get_scan, /* SIOCGIWSCAN */
    r8180_wx_set_essid, /* SIOCSIWESSID */
    @@ -1369,7 +1369,7 @@ static inline int is_same_network(struct ieee80211_network *src,
    (dst->capability & WLAN_CAPABILITY_BSS)));
    }

    -/* WB modefied to show signal to GUI on 18-01-2008 */
    +/* WB modified to show signal to GUI on 18-01-2008 */
    static struct iw_statistics *r8180_get_wireless_stats(struct net_device *dev)
    {
    struct r8180_priv *priv = ieee80211_priv(dev);
    diff --git a/drivers/staging/rtl8187se/r8180_wx.h b/drivers/staging/rtl8187se/r8180_wx.h
    index 735d03d..4081914 100644
    --- a/drivers/staging/rtl8187se/r8180_wx.h
    +++ b/drivers/staging/rtl8187se/r8180_wx.h
    @@ -7,7 +7,7 @@
    Parts of this driver are based on the rtl8180 driver skeleton from Patric Schenke & Andres Salomon
    Parts of this driver are based on the Intel Pro Wireless 2100 GPL driver

    - We want to tanks the Authors of such projects and the Ndiswrapper project Authors.
    + We want to thanks the Authors of such projects and the Ndiswrapper project Authors.
    */

    /* this file (will) contains wireless extension handlers*/
    diff --git a/drivers/staging/rtl8187se/r8185b_init.c b/drivers/staging/rtl8187se/r8185b_init.c
    index af9be96..9144957 100644
    --- a/drivers/staging/rtl8187se/r8185b_init.c
    +++ b/drivers/staging/rtl8187se/r8185b_init.c
    @@ -1008,7 +1008,7 @@ void ActUpdateChannelAccessSetting(struct net_device *dev,
    u8 u1bAIFS;
    u32 u4bAcParam;

    - /* Retrive paramters to udpate. */
    + /* Retrieve paramters to update. */
    eACI = pAcParam->f.AciAifsn.f.ACI;
    u1bAIFS = pAcParam->f.AciAifsn.f.AIFSN * ChnlAccessSetting->SlotTimeTimer + aSifsTime;
    u4bAcParam = ((((u32)(pAcParam->f.TXOPLimit)) << AC_PARAM_TXOP_LIMIT_OFFSET) |
    @@ -1104,7 +1104,7 @@ void ActSetWirelessMode8185(struct net_device *dev, u8 btWirelessMode)
    return;
    }

    - /* 1. Assign wireless mode to swtich if necessary. */
    + /* 1. Assign wireless mode to switch if necessary. */
    if (btWirelessMode == WIRELESS_MODE_AUTO) {
    if ((btSupportedWirelessMode & WIRELESS_MODE_A)) {
    btWirelessMode = WIRELESS_MODE_A;
    @@ -1124,7 +1124,7 @@ void ActSetWirelessMode8185(struct net_device *dev, u8 btWirelessMode)
    * 2. Swtich band: RF or BB specific actions,
    * for example, refresh tables in omc8255, or change initial gain if necessary.
    * Nothing to do for Zebra to switch band.
    - * Update current wireless mode if we swtich to specified band successfully.
    + * Update current wireless mode if we switch to specified band successfully.
    */

    ieee->mode = (WIRELESS_MODE)btWirelessMode;
    @@ -1242,7 +1242,7 @@ bool MgntDisconnect(struct net_device *dev, u8 asRsn)
    */
    MgntDisconnectAP(dev, asRsn);
    }
    - /* Inidicate Disconnect, 2005.02.23, by rcnjko. */
    + /* Indicate Disconnect, 2005.02.23, by rcnjko. */
    }
    return true;
    }
    @@ -1416,7 +1416,7 @@ void IPSEnter(struct net_device *dev)
    * Do not enter IPS in the following conditions:
    * (1) RF is already OFF or Sleep
    * (2) bSwRfProcessing (indicates the IPS is still under going)
    - * (3) Connectted (only disconnected can trigger IPS)
    + * (3) Connected (only disconnected can trigger IPS)
    * (4) IBSS (send Beacon)
    * (5) AP mode (send Beacon)
    */
    --
    1.7.5.4


    \
     
     \ /
      Last update: 2012-04-16 17:25    [W:0.061 / U:183.648 seconds]
    ©2003-2016 Jasper Spaans. hosted at Digital OceanAdvertise on this site